How To Install A Train Horn On Your Chevy Silverado!

Fallow me on Instagram @adonaylopezdiy
Parts:
Air Horn- www.amazon.com...
Butt Connectors-
www.amazon.com...
T Taps-
www.amazon.com...
Stripper-
www.amazon.com...
Wires-
www.amazon.com...

[@painisvergina3693]

This is the video I needed but dang that’s a ton of work

[@josephrosen8925]

Excellent video. Just hooked up my Amazon horn just like you showed. Thank you!!!

[@jeffbowen4600]

Thank you for posting this video; I found it very helpful. I just installed a Motohorn in my Silverado yesterday, and I'm very happy with how it turned out!

[@deerslayer16ga14]

do you have any pics on where you installed the moto horn ? getting ready to install one myself..

[@jeffbowen4600]

@@deerslayer16ga14 I didn't take any pics, but I mounted the horn on the driver side wall of the engine compartment, alongside the fuse box. I used one existing hole and drilled an additional one. I mounted the compressor on the same wall, but on the opposite side, inside the quarter panel. I again used am existing hole. It was a tight fit getting my arm inside the quarter panel, but you'll see plenty of space in there for it, once you remove the headlight assembly. I mounted the relay using an existing hole near the space provided for an additional battery, which my truck doesn't have. Hope that helps!

[@deerslayer16ga14]

@@jeffbowen4600 basically i did the same thing , just have to hook up to the horn wire , started to pour rain so had to stop install . love the moto horn have them on motorcycle and two other trucks.

[@jeffbowen4600]

@@deerslayer16ga14 Right on. I'm loving the Motohorn, too. I bought one for my motorcycle as well, but haven't installed it yet.

[@dsmnpd]

Thank You For Making This Video. I Want to Install a Motohorn in My ‘21 Silverado and Connect it To The Factory Horn. GREAT Video, Exactly What I Was Looking For!

[@tmc1556]

Just a couple of tips anytime you run wires thru holes in metal always put some type of protectant on the wire. I mean anything around the wire where it goes thru the metal. The biggest problem is you didn’t put a fuse at the battery. The way you did it is a possible wire that melts down and catches fire. Don’t get me wrong it’s a very informative video but those to things need to be addressed if you continue to make install videos

[@edrussell9855]

Thanks for the video my friend 🙏 I will do an install into my Silverado soon 😀

[@arowdytxn]

I just ordered these and will be referring to your Video again. Will let you know how it goes!👍🏻

[@jaxonbaker2512]

Not worth it.

[@Airmarty23]

Where did you order these at ?

[@crispkillzyt5857]

@@jaxonbaker2512 how come?

[@m1ggi3]

That's a clean install buddy. Im installing it in a Smart Car, lol. Wish me luck, as there is almost no space in that tiny car.

[@kylemyers9285]

Bros putting a train horn in a smart car lmfaooooo I gotta see it in use

[@chrisgomez310]

Does instaling it affect the horn when locking the truck?

[@artofruin1393]

Not bad, but can i add a couple pointers for a safer and longer lasting effect? 1. Fuse that cable from the battery. ALWAYS. 2. Either put wite loom on all cables to protect them from chaffing or use electronic shrink tubes where all wires connect. (Butt connectors, etc.) Overall, not bad.

[@lainthomas8494]

Hey man any idea why mine sounds very highpich ? I have the same one you had

[@davidgastelum8624]

Explain what you did at the end to make the horn louder.

[@AdonayLopez]

@@davidgastelum8624 the loud sound its from the regular horn and the air horn going off at the same time.

[@drpl420]

Where did you purchase it

[@edrussell9855]

I have a green & a black cable. Which should I tap into?

[@someoneimportant7554]

Also need to know this

[@jamothegreat6052]

Like I said and somebody's comment before. I have a single horn that actually Louder than that. His horn is followed by "donuts!"

[@saibhreasllc2693]

Doesn’t seem too loud

[@greg3296]

Must sound louder in person? Maybe the video doesn’t do it justice

[@justaversa2214]

Oh yeah the plug comes out sooooo easy not for me😂😂😂😂

[@freddavison2726]

Not a train horn and be prepared to adjust the volume of his voice up and the volume of the sound way down!

[@pyroro22]

So

[@steggc85]

This is not a train horn

[@joshuakoopmann9730]

That's what he said

[@steggc85]

@@joshuakoopmann9730 yes, I did. These are air horns, definitely not train horns. This video is just to sell bullshit mislabeled crap that you can buy at a parts store or harbor freight for a fraction of the price. Even my WOLO Siberian express horn isn’t really a train horn but sounds more like one than this bullshit

[@Valdemar-Perez-III]

He said that

[@Amarillobymorning777]

Still very loud to be a city horn

[@bobloblaw9302]

Not a train horn!

[@jamothegreat6052]

I have a cheap single horn.That's louder than that! The horn he has is followed by "donuts!"

[@elian_ortiz_official722]

Didn’t like that sound at all, I rather spend $1.5K and I’ll get a real train horn sound

[@chrisandsoforth319]

It's not a legit airhorn until you install an air tank. Try again. 👎🏻

[@artdeluca8680]

Take a nap dude

[@Accumulator1]

That is just a mulitone horn. Can be achieved without compressor and all of that rigging. Use stock relay.

[@donjuan6388]

Pretty gay!