Install Car Alarm Remote Start - Bypass Module - Honda Odyssey (Video 3)

Buy Remote Start System
US: amzn.to/2zyB6NC
CDN: amzn.to/3kmr2jO
To Buy the Flashlogic FLCAN Bypass Module:
US: amzn.to/2DgJOma
CDN: amzn.to/3svpB5o
=======
In this video, we used an Audiovox Prestige APS997E remote start system and installed into a 2008 Honda Odyssey
=======
TOOLS:
Car Panel Removal Tool Kit 18pcs
US: amzn.to/2KO7688
CDN: amzn.to/2YLH3bz
Angled Push Pin Pliers
US: amzn.to/31ClCGT
CDN: amzn.to/2H8lKpN
Auto Ranging Digital Multimeter (Test: volt, ohm, amp, diode, etc)
US: amzn.to/2JSSHrB
CDN: amzn.to/2PKPCxI
Klein Tools Single Pull Wire Stripper
US: amzn.to/2Rw63ga
CDN: amzn.to/2nBl7OI
Automatic Wire Stripper
US: amzn.to/2Oqk7ue
CDN: amzn.to/2MT7CH8
Professional Wire Stripper
US: amzn.to/2REssbn
CDN: amzn.to/2lRA1jr
Channellock 909 Wire Crimping Tool
US: amzn.to/2xzGDFa
CDN: amzn.to/2m7qAfN
100-Piece Magnetic Screwdriver Set with Rack
US: amzn.to/2XBN19t
CDN: amzn.to/2m3qw0o
200 PCS Insulated Wire Butt Splice Terminals
US: amzn.to/2NZ3MdK
CDN: amzn.to/2mXHCgq
Assorted Heatshrink Tube
US: amzn.to/2EPln1K
CDN: amzn.to/2rlQbEi
Scotch Super33 Super 33+ Vinyl Electrical Tape
US: amzn.to/2RAk1Od
CDN: amzn.to/39qagdF
3M Fabric Friction Tape
US: amzn.to/3894Nb1
CDN: amzn.to/3fZLweW
OLFA 5019 SVR-2 9mm Stainless Steel Knife
US: amzn.to/2GuHutS
CDN: amzn.to/2o2mFBi
Cable Zip Ties - 500 pack Assorted Size
US: amzn.to/30pp0HS
CDN: amzn.to/2YlPs2w
Weller WLC100 40-Watt Soldering Station
US: amzn.to/2T1eDUg
CDN: amzn.to/2O4Cm6m
Resin Core Solder: 1.0mm, 100g 60/40
US: amzn.to/2DdmbxL
CDN: amzn.to/2LvEqT4
Soldering Mat - Large
US: amzn.to/2Hqxt6j
CDN: amzn.to/2IXS6HH
========
Video 1
How To Install Car Remote Start - Wire Preparation (Video 1)
• Install Car Alarm Remo...
Video 2
How To Install Car Remote Start - Alarm Wiring (Video 2)
• Install Car Alarm Remo...
Video 4
Bypass Modules Explained
• Car Remote Start Bypas...
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime 12 Months
amzn.to/31i05mP
Try Amazon Prime 30-Day Free Trial:
amzn.to/2S3GjHI
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.

[@911FENDEW]

I I'm not even thinking of installing or doing any on this work but the way you presented the video I ended up watching all three parts. Best video tutorial on youtube.👏👏👏👏

[@dial2fast]

Thanks for your comment. Yes, these videos will show people what's involved when doing this type of install.

[@awongutume]

As always, great vlogs. Have you done any previous vlogs or aware of the VCM issues plaguing the Honda Odysseys and other Honda’s with the IV-TEC VCM engines? If not, can you look into and share your perspective? Do you have a VCM muzzler on your Odyssey? Have you experienced unusual oil consumption, spark plug fouling and car shakes around 50mph which can lead to premature engine mounts and possibly engine failure?

[@STICKITINYOUREAR]

Thank you dial2fast, it was the BEST how to video I have seen ! The camera work was fantastic! I never had any intention of doing the job myself but I was curious to see what was involved so I watched all 3 videos. I have bought but not had installed yet the Audiovox Prestige APS901E remote starter and Idatalink ALCA bypass module for my 2009 Dodge Caliber SXT.. Buy watching your video I have learned three things: 1) why for sure I would NEVER consider doing this. 2) why it costs so much to have it installed. 3) My next car is going to come with a remote starter. : ) My only question is, didn't you have to flash the module and if not, why not. If yes, why didn't you show that. It was my understanding that almost all modules have to be flashed. That would mean you would also have to buy some type of USB connector going from your module to your computer. That's another expense that people should be aware of, because it's not cheap. Thanks again for three great videos. ( today is DEC. 14/2017)

[@dial2fast]

Your comment is totally correct. After someone watch the whole process, they can decide if this is something they want to take on. People need to know their limits and if you mess it up, it can cost you a lot of money to fix on the car's electrical. As for flashing the bypass module, you can either buy it pre flashed with the software that you need for your car, or if you are a dealer, you can flash the module to whatever firmware you need, and yes you do need the USB dongle which cost extra. I have the ability to flash my own firmware and I did not show it because it's not something everyone will have access to.

[@georgebl6501]

exellent video i will see if this system is the same as my 2006 love the features

[@acrx72]

Awesome video, I have one question I have installed this alarm on my 97 honda accord ex but my remote start doesn't work, I need to promete it to do so but for the love of my life I can't , on the manual its says to push the pushbutton is that the valet button, and do i need to have the gear wire installed, please help me program it to remote start, its getting cold :-) thank you !!

[@e-zgarcia7609]

What kind of siren do you have ? I like how it chirps ?

[@caribbeanfinecigars2070]

good video I have a question. I have an odyssey 06 it did not come with a remote but it has an alarm factory alarm, will I be able to bypass the factory alarm and put?

[@joeyao5021]

Very nice video! Could you tell me how could I find out which cable should I use on the alarm system? There are many wires and some of them are start 2, ignition 2 etc.

[@eacalways]

Can you show how you added relays for the sliding doors?I will be installing remote starter/alarm soon on my 2006 Odyssey,thanks

[@12vgs8606]

I think you have done a soldering tutorial before but I would like to see more detail on how you were stripping of the insulation without cutting the wire and soldering it so effortlessly. I have no idea where you were keeping the soldering iron while you were not using it. I had vision of seat or carpet getting burn marks from tipping the soldering iron while you were fiddling underneath!! If you can show us the tricks you were using to do this so efficiently would be highly appreciated.

[@dial2fast]

Thanks for the question. I will be doing another remote start in my Quest in a week, I will show you how the soldering is done and what I use. Stay tuned!

[@eacalways]

I’ll be installing remote start on my 2006 odyssey next week but will using crimestopper sp-402 with evo all bypass,when you hook up the sliding doors did you have to use relays?Also on the parking lights connection did you tap into the 12V wire? I read somewhere that 12v parking light shouldn’t be use because it can damage the light switch permanently?

[@sukbadaimonghol1089]

Where do people usually can down load the factory wiring diagram for door lock/unlock, roll up/ down window, open /close sun roof, sliding door etc.?

[@CourtneyUglow]

My alarm isn’t unlocking the doors any longer. How do you reprogram remotes to unlock and lock doors again?

[@curtisrobinson3520]

Blessed day. Channel 1&2 on my one way transmitter remote is programmed to open my sliding doors, how do I program my 2way transmitter remote to open those doors?

[@josecuevaz5298]

Do you have a video on how to connect new remotes I lost mine nd ordered new one and I don't have money to get them connected so I have to do em my self

[@sombie14]

Hey man your videos are great I got a 997e prestige alarm for my crv 08 I hooked everything up I follow your guide is not the same but similar my problem is everything works except for the remote start I hit the button twice and the turn on and the off and so on any advice on this? Do I have to connect the inhibit wire with a relay ?thanks

[@christophermartinez1321]

Hey dial2fast how u reset it if not how u fix key fob like it show door lock but it also show door flashing open

[@raelewis8848]

All Clifford alarm systems? Remote can use on any Clifford alarm

[@jaimevergara5530]

What wires do I need to connect to the bypass if I just wanna turn on my 2007 Honda oddyssey van?

[@sangdang89]

why did you connect the sliding doors, Trunk status to the bypass when you are using Data mode?

[@tituaaaa]

Hey great video. Just one question. When you open a door or the hood, does the remote tell you that a door is open?

[@dial2fast]

When opening door or hood, it does not tell you, but if you arm with door open, it will tell you. If you arm the alarm, and someone open the door or hood, it will trigger the alarm and let you know. Or if you open the hood while remote start running, it will shut engine.

[@sravanbobba]

Hi dial2fast. These are excellent videos to install/understand functioning of remote starter. I bought a used 2013 KIA sorento, which already has the APS997E installed. But the 1 way remote is lost. Can I buy a replacement and program it?

[@dial2fast]

Yes, you can program new remote to the alarm / remote start system. Just follow the installation manual for programming instructions.

[@kennethsamuels3255]

Great teaching very informative great job.

[@dial2fast]

Thanks for your comment!

[@mattwilkins1597]

Awesome set of videos.

[@kingtracker184]

hi brother excellent video I do the same thing depends who does it it take time to do it right

[@evanrobertson2615]

I'm installing the same setup on a very similar vehicle, '08 Accord, and your video has been extremely helpful so thank you. I noticed on your wiring diagram of the remote start to the bi-pass module you had an "NA" next to the e-brake status (-)output (4:44) even though the diagram appears to be calling for that connection. Was there any particular reason you didn't need to hook up that connection? Is it b/c you don't need it hooked up b/c you won't ever turn ON "turbo timer mode"?

[@dial2fast]

+Evan Robertson The Odyssey as you know is not turbo, and therefore not necessary to connect it. Only connect the features which are necessary.

[@hallmonitor98]

I dont have keylless entry for my car, would i have to buy anything extra on top of getting a remote starter?

[@mohssineelbakalikassimi7909]

Very good good video I followed the well detailed instruction and the install was successful expect that it seems that the dashboard light fuse blow every time I use the remote fob to open the doors or start the car. Any suggestions. Thanks

[@luisquiroz4921]

How come when you remote start your Honda the alarm chirps 2 time? I’ve been wanting to program that to my car. Is it just a Honda thing?

[@maximcurtis2586]

I realize it is pretty randomly asking but do anybody know of a good place to watch new series online?

[@thavonsaysithideth4084]

Did you make connection on Tachometer wires from "Remote Starter to Bypass Module"? I didn't see it on both video 2 and 3 or maybe I missed it, sorry.

[@dial2fast]

With this vehicle the data mode provided the tach information the remote starter needed. If you install yours and find the starting is problematic (with data mode), then you will need to run a wire to the spark plug for tach voltage reading.

[@thavonsaysithideth4084]

@@dial2fast Awesome! very informative, thank you very much.

[@jesusmarroquin2821]

Hello i was wondering if you could tell me if the process would be the same for a Chevy Aveo ls 2005

[@marcusl.daniels9052]

Looking to find premium wire stripping and crimping tools like yours? Where do you shop to find them?

[@dial2fast]

I have added links for some of the tools in the description of this video. Check it out.

[@grandparolie]

How do I program my remote to start my truck I changed the truck main battery in the engine compartment and now it doesn't start with the remote also would it be best to tap into the tach wire by the engine coil please help me out? Thanks! X

[@jorgeciubal6036]

What kind and where did you bought your bypass module?? I don't know what to get to my 2009 dodge journey.

[@eduardomendoza9964]

Did you connected E-BRAKE (-) INPUT from remote starter to E-BRAKE STATUS (-) OUTPUT - GREEN from flashlogic ?

[@dial2fast]

+Eduardo Mendoza No, did not connect e-brake.

[@peterb.8056]

Great videos!! I Need to get this alarm for a 2001 Buick park ave SC. Can you tell me where to get it?

[@dial2fast]

+Peter Bernard I bought all my parts from Ebay but make sure you know how to install it.

[@thamergh5671]

perfect work ..... many thanks

[@PRND321]

How do you adjust the time on the remote, I got mine today & the time is off

[@Syanes-iw6iz]

Great video👏

[@aspjake123]

Excellent videos!! Thank you

[@JackRR15]

Where do you buy the remote and module? Every major brand website refer you to a dealer. They don't seem to let you buy yourself to DIY?

[@STICKITINYOUREAR]

You can go to Amazon. They sell both remote starters and bypass modules. You can also try to google it.

[@JackRR15]

Stuff on Amazon Canada is pretty sparse.

[@JackRR15]

Took a look on US website, wow significantly cheaper and does ship to Canada. Interesting..

[@STICKITINYOUREAR]

The MidnightNarwhal- What can I say ? Amazon.ca sucks. I found what I wanted on Amazon.com for $ 54. US which was $ 70. on Amazon.ca There is however a CDN company ( a distributor) for iDatalink products in Markham ON. You can either go to there shop and have them install a module and a remote or you can order from them online at their website. It's called Lockdown Security.com. I bought my bypass module from them online and they flashed it for me. It should arrive next week. The guy who I talked with was REALLY helpful and answered all my stupid questions. FYI- iDatalink will work in almost any car. If you go to their website they will ask for your car make, model and year and then spit out what products are compatible for your car. My car is a 2009 Dodge Caliber. I bought the iDatalink ALCA bypass module . You can also go to that CDN company I told you about and they will do they same thing. They will tell you what you need. My remote starter was bought last week from a guy in Milton ON who will install it all at a later date. For me his shop was much closer than Markham. I bought my remote starter from him. It's was the Audiovox Prestige APS901E remote starter. Good luck . if you have anymore questions,don't hesitate to ask.

[@JackRR15]

alright thanks I'll take a look!

[@marks3478]

question for you. My remote starter stopped turning over the car after I replaced the car battery. It will crank the starter but itwont turn over. The key will start the car. I also discovered, If I just hold the key close to the ignition and press the remote starter the car will start. What are your thoughts?

[@dial2fast]

+Mark S It sounds like there is a problem with the bypass module. You will probably need an alarm shop to troubleshoot it depending on the make and model of the alarm system.

[@marks3478]

Thanks, I kinda thought I would have to seek expert help.

[@deepamu1918]

hi there. you did a very good job at explaining everything. i am going to install a prostart remote car starter and alarm in my 2002 Acura EL and i am using xpresskit DBall2. I have wiring information and all but i wanted to know that if i use D2D mode do i still connect negative door and alarm output wires from my remote starters brain to factory harness or leave them as they are all doted in DBall2 diagram sheet. And after installations do i still have functionality of my oem alarm and remote? thank you.

[@dial2fast]

+deep aman The negative door trigger should be provided in data mode and you should not need to hard wire it to your alarm brain. The factory alarm is still functional.

[@deepamu1918]

+dial2fast so basically i am connecting ignition harness, parking light, brake switch, tach, hoodpin, my siren and bypass module. What about dome light and trunk pin and trunk release. thank you.

[@dial2fast]

+deep aman Dome light is your negative door trigger. Trunk should be provided by the data mode bypass module. Trunk release (if it has power trunk) may or may not be from the data mode, so you might need to install a relay for that to control. I am not familiar with the DBALL, but I know iDatalink bypass modules install guide will tell you what all the options it can provide to control.

[@deepamu1918]

+dial2fast in my Dball2 diagram trunk input and output is a dotted line and i do have power trunk(can open from my oem honda remote). Since my trunk is + output i need to put relay between my factory trunk harness wire and remote start brain i believe. thank you.

[@dial2fast]

+deep aman That dotted trunk line in the diagram is most likely referring to trunk alarm trigger (like if you open the trunk, the alarm goes off) and not for remote pop open. So you will need to wire in your own relay to a channel output on your alarm to control it.

[@ernestotavarez3328]

did you had to flash the bypass??

[@bambambundy6]

Nice Video! Thanks!

[@gunosautocare2910]

i need to find Tach inup location on my 1992 Chevrolet Blazer full size 5.7L? can nyou give me a hand with that please

[@arkanabdulkareem5152]

Good luck

[@MrRangerZr1]

Is there a remote starter or alarm system for the 2010 EX-L?

[@dial2fast]

+MrRangerZr1 All alarm systems are designed to work with all production cars. That's why the alarms have so many wires you don't use because it's meant to accomodate many different types of cars. You just have to wire it properly to your car and program the necessary options. Same for the bypass module, it needs to be programmed for your year/make/model.

[@MrRangerZr1]

+dial2fast Will the one you installed work for the sliding doors and power tailgate?

[@dial2fast]

+MrRangerZr1 Any remote opening features require an aux channel on the alarm system. Yes this alarm has enough aux channel for such a setup. Keep in my, you will need to connect external relays properly for the integration to your car. Some car use positive trigger, some use negative trigger, some use reverse polarity. You will need to know what your car needs and how to wire it up. What I showed in my video is specific to my car, not for all cars.

[@OneLousyShot]

Part 4 is private other than that I love your vids are they private by default??

[@dial2fast]

Sorry, was updating some settings on KZbin. It's published now. Thanks!

[@sharronjackson1510]

dial2fast

[@jakev5408]

I recently had this 997E installed on my 2012 Toyota Sienna by a shop. Everything seems to work but after I remote start it will not open either slide door nor lift gate from the remote. If installed correctly should it open after started?

[@dial2fast]

If you arm the car, then do remote start, the car is still armed and locked, until you press the unlock/disarm button.

[@gregyoung5319]

Safety precautions

[@Fullrusher]

Hey do you think a normal guy like me could learn to install remote starters ? If so what's the risk in doing this ?

[@dial2fast]

If you have not done car installs before, I recommend, you start with car stereos, then do a bunch of regular car alarm installs, then get into remote start system. You need to know how to test all the wires, and the risk is damaging the factory wiring system rendering your car not operational and a huge repair cost.

[@ahmedelrashidy2416]

I need help with my 2004 Honda element ex pls

[@maamoracashcanalm]

great job.

[@tuanv8027]

great vids

[@dial2fast]

Tuan Van Thanks for your comment!

[@johnlankford9609]

I have an 87 Mercury.Do i need a bypass module. What command start should i use?

[@hashemal-daoud8488]

john lankford hello there, did you install the system to your car ? I have an old car as well and still can’t figure out how to install it without the bypass thing

[@lorocc]

I have mine set with a timer of 10 minutes, after that it will shut off. How can I change to 15 minutes?

[@dial2fast]

Platta If you also have the APS997E, then you need to change the feature in Bank 3 Feature 3 from the default 10 min to 15 min. Those features can be accessed by following the instructions in the install guide which you can download from the Prestige website.

[@joseoscal8582]

is possible for the alarm only to sound on the remote control and not the car?

[@baezlic]

Yes, if you use a two way control

[@donovans1]

I have the same problem. I don’t know what I didn’t and it’s a 2005 Nissan Altima

[@JackRR15]

What is the point of the car shutting off if the hood latch gets pulled?

[@gregyoung5319]

TheMidnightNarwhal so mechanics don't get injured by accident

[@borndifferentnf1]

Do u have a email I'm doing a remote start and been going nuts trying program my flashlogic and think I'm doing it wrong and I tried calling them but being put on hold more then 20 min i gave up let me no thanks and your video the best I seen but I'm doing a different remote start

[@spicemxcan]

Thats awe awesome dude. How can i get the wire diagram for a 2002 jeep grand cherokee limited? Thanx.

[@mohammadariff3790]

hi.gudday fren.i have problem with my gadjet.(tenon model).when i wanna start.it became 2,3 times startting the engine even the engine is already started.plz help .

[@mohammadariff3790]

it is also connected with another turbo timer from another aftermarkrt brand

[@mohammadariff3790]

before .not working.im have try chechk & replace some fuse.then my arlam.locking sysyem work fine.but this autostart didnt .its became the problem above

[@BadDonkeyBaby]

How difficult is retain factory horn in this alarm

[@dial2fast]

Ernesto Hernandez This Prestige alarm also has a (-) horn output wire. So you can wire to the factory horn if you want. Use a relay on this wire if you need 12V for the horn.

[@GeorgeGardinier]

and don't be colour blind, lol, great as always, how many days did this take, ha. i rub my soldering tool on the shrink wrap rather a lighter as i don't have lighters any more. i think you had a wireless soldering tool. i am waiting for the next vehicle you do,

[@dial2fast]

The filming made the install a lot longer than it needs to be. If I was to do it straight, it should take more than 4 hours.

[@rogelmonzon5463]

where is the place to put a shock sensor? thanks :)

[@dial2fast]

+Rogel Monzon Watch all 3 parts. Shock sensor in video 2. kzbin.info/www/bejne/bHa9i3-ViK11f7c

[@badranger2004]

Where did you purchase your alarm from

[@dial2fast]

+badranger2004 Everything from Ebay US sellers.

[@eulyzaplayz5931]

Honda Odyssey

[@GodlyETV]

How do I adjust the shock sensor sensitivity?

[@dial2fast]

+Paradew™ Adjust by turning the sensitivity knob

[@GodlyETV]

I did not install this in my car so where can I find this sensitivity knob. Im guessing its on the module that came with the alarm system. where might someone place that module in the car?

[@kimberlyhoskins9917]

YOU ARE AWESOME 2 FAST

[@eksine]

in conclusion, just take that shit to best buy

[@south5side2finest]

may you please make a how to video on the shock sensor mode selection i try program it to stage 2 so many times and i can't to get it work . model aps-997E

[@dial2fast]

I just followed the programming steps and worked fine: 1) Turn the ignition key to the on position. 2) Press valet switch 3 times (Siren Chirps Once). 3) Turn the ignition key off then on you will hear 2 chirps. 4) For shock sensor setting, Press the valet switch 15 times 5) use the lock button of the transmitter to toggle between the 3 modes.

[@mostafahasn6999]

It's too complicated I change my mind for install it.