Install the Essential Flow Indicator Kit on Your CS4-I GX Compressor: A Step-by-Step Guide!

[@TargetForge]

Check out the new channel here! Give me a like and a sub! -youtube.com/@TheDIYMaker-ie2qk?si=Tuo1gQEPMiEVpFLO Get yours here! - targetforge.net/shop/ols/products/gx4-flow-illumination Join this channel to get access to perks: kzbin.info/door/nEWK-YykT9-uf1F49Xnqigjoin Affiliate Links That Support The Work We Do Here! Use our link and visit Airgun Depot! amazon.rockporch.com/mlink/372?userId=140361 CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu CS3i- amazon.rockporch.com/prdlink/JNULlImjtd CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.

[@lio1999]

Very good product, no need to open up the cap every time to check water circulation. Wondering, how often we should change the water?

[@TargetForge]

Rarely if ever.

[@lio1999]

@@TargetForge Thanks

[@SPARK-uz3zj]

Another great video and mod. Thank you Bill

[@TargetForge]

Thank you!🏴‍☠

[@AirRuna1]

Hi Bill great video thank you question of the day with the knowledge of both of these compressors if the Yong Heng and the CS4 came out at the same time which one would you have purchased

[@TargetForge]

Honestly, I lived through the early Yong Heng years, they were REALLY bad, they did improve over the years but comparing the two at incept? Not even close, GX CS4 and CS4-I win everyday and twice on Sunday. More portable, quieter, less fuss, no stupid 5 gallon bucket... I could go on but I think you can see my answer pretty clearly now. I even think the CS2 and 3 and their variants make more sense if you're filling the gun directly. To me, the Yong Heng is a dated, poorly designed, inexpensive compressor that requires the user to "overlook" quite a few faults. Yes, they are cheaper and do offer higher flow rates but as soon as you want to take your unit in the field, haul or find water for your bucket, find an outlet that will deliver 1800W of AC power, the wheels come off that train pretty quick for me. Would I have spent nearly 40 hours on an airplane to visit the Yong Heng Factory? Ever? Nope. Did I do that to see where the GX was made? Yup.

[@DrSaminstine]

Cool upgrade!

[@TangDynasty1983]

Thanks for the video. Can you make one on how to install the hour meter? Thanks a lot!

[@TargetForge]

Yes, soon

[@TangDynasty1983]

@@TargetForge can you advise what gauge of wires goes into the motor? Thanks again.

[@wruehl]

The feed wires are the Asian equivalent of 12 AWG. ​@@TangDynasty1983

[@snilloc1789]

Very cool upgrade, do the lights work on both ac and dc?

[@TargetForge]

Yes they do

[@snilloc1789]

@@TargetForge thank you

[@kmom777]

Is young heng the main owner company of GX pump compressors?

[@TargetForge]

Absolutely NOT.

[@ThePredator2k]

Is the hour meter resettable?

[@TargetForge]

No, they can have time added to them, but you cannot move backwards. Taking time off an hour meter would be like resetting the odometer in your car, would lead to fraud and deceit during resale. Why would you want to reset it?

[@ThePredator2k]

@@TargetForge to reuse it maybe on a other machine

[@kricketkricket6737]

Gc4-1 1 minute cross hits liter pressure?

[@TargetForge]

I have no idea what you mean.

[@kricketkricket6737]

@@TargetForge How many liters of pressure does it produce in one minute? CS4-1 model? Example yong heng one minute /50L

[@TargetForge]

I believe your question is one of flow volume, not pressure. I do not believe for one second that a Yong Heng does 50 liters a minute. The GX CS4 and CS4-I will fill a 6.7 Liter bottle from 0 to 4500 psi in approximately 3 hours, you can see that test right here on the channel: kzbin.info/www/bejne/aoulg2CbaLVrbKcsi=aJNjN-DTuMlloJOb Also, the CS4 runs cooler, quieter, is actually portable, runs on AC ad DC power AND NO silly bucket!

[@tonycarr1253]

Wussup Bill I’ve been trying to find the GX-CS1 at your Store on Amazon ??? When will You have Them Available Sir ? PS: hope I got the Name rite ?

[@TargetForge]

Hello Tony, I don't actually recommend the CS1, why would you go that route? No parts, and no support for a low performance solution? If you must have auto stop, get a CS3 or CS3I.

[@tonycarr1253]

@@TargetForge I’m talking about the CS4-I Gx Compressor. Do ….. You Recommend it ? I’ve Watched All Of Your Reviews, and Upgrades for it. That’s the One I, and My Brother In-law would like to Purchase. I told him to Hold Tight Until I Touch Base with You.

[@TargetForge]

Your original message indicated a desire for a CS1. Yes, the "I" variant of the CS4 has proved enormously popular. I have pushed your question upstream and I'll let you know when I hear back. Thanks for your comment!

[@tonycarr1253]

@@TargetForge Thank You Sir🐿