Installation Guide - Pelsee Mirror Dash Cam

[@OdayLpha]

Wow this video literally made me feel dumb. I was frustrated that the front camera could not adjust the view as I adjusted the mirror. Turns out the camera could be rotated lol

[@jondickson75]

Does the gps have to be on roof or dash?

[@akadhum]

That’s too much work 😢

[@skylarwayne9922]

The rear camera is going to make me cry 😭😂

[@jaredbofficial]

Hi! I have a wheel on the back of my car which blocks the view of the camera so I put the camera on the roof. The view of the camera is upside down, how can in invert the view of the camera on the device?

[@Senorjerez]

😂

[@LorenaDeLaCruz_7]

You can’t mount the back camera onto the hatchback windshield?

[@-gomez1723]

I'm having an issue with my dashcam not shutting off after setting the time to 1 min? Any idea why? I have it hooked up to my lighter plug

[@doracapetillo2750]

I don't have the bands to attach the camera. Any suggestions on how to mount?

[@davidmaciel8218]

How do i know if is still recording when my car is off? i have the cigarette conector version

[@RaghuRam-ys3fv]

Cant we use the same camera which is used for reverse camera for recording also?

[@thomasnappo6309]

Nice job

[@challaraghavendra319]

Hi, is it possible to install maps navigator app in Pelsee?

[@RdKil]

is it possible to use the backup camera at the same time as the front one if you wire it o a different power source and have the video record from both feeds at once? or can it only save video from one direction at a time?

[@ScottRods]

I think the back up function is just to trigger it full screen when reversing. From what I have seen, both front and rear cameras will be recording at the same time. So basically it is just an extra function to give you an instant back up camera. I will be fitting one tomorrow and making an install and review video on my channel.

[@donkeykong516]

Thank you

[@athuddriver]

Any information on installing this in a Tesla with the 16V system and the "always on" power outlet? Assuming these will work with 16Vs, the always on issue is a problem unless these products know when to shut down (or got to sleep) if the cameras don't see any activity and can wake up with movement.

[@inelonwetrust9169]

With Sentry mode why would you need it?

[@allanlozada1779]

That's alot of working alot of cables. Not worth it.

[@JimmyFisher-v7s]

For you because you slow 😂

[@jsmithkoko]

weighs 410grams shakes so much ,so i sent it back