Installation of a S10 3/4” Lowering Kit

I do not own this Music!
This video is breakdown of OPERATION S10
You will see in this video, the Installation of a 3" Front Lowering Kit & 4" Rear Lowering Kit on this '98.
This kit was purchased through airslamit.com, where you will receive the items as follows:
3" Drop Springs
4" Rear Drop Blocks
U-Bolts & Hardware
Watching this video will show you the steps and tools needed to perform this operation successfully, Leave Comments Below!

[@joshuapeters7865]

I just bought my first vehicle and it’s an s10 and I was inspired by going to my first mini truck show and this video just gave my much more information and inspiration thank you so much

[@abrahamsalamanca38]

You explain so much in this video I first of all that even know how to drop kit look like now that I’m seeing it all makes sense man thank you

[@nicodimus74]

Great video,lowered my 2003 s10 xtreme this morning using your video,thanks!

[@83malibuwagon]

I've been fighting getting the pins to line up but your video made me realize where I fucked up, I didn't unbolt the bottom shock bolt....should've easier now. Thank you !

[@edwolf9433]

Thank you for making this video, gives me some courage to do it on my own.

[@jamesshaw89]

Excellent video, thanks for showing us a quick view of what it looks like after.

[@imaginethiz6845]

Nice work can’t wait to have a 3/6 drop

[@robertozavala3124]

does it feel the same as stock?

[@disastreee]

we got ur whole playlist in the description 😂

[@sergiomoreno4839]

Excellent S10 !!!!

[@MiniBlazer-cp6ly]

Just did that to my 1988 s10 mini blazer 🙌🙌🙌🙌🙌

[@reaper-uchiha]

Where you get the kit from bro

[@TheRx8guy]

What are the specs on those IROC wheels and what’s size tires are you running? Great video man!

[@ppa601]

TheRx8guy sorry just now seeing this 215/35/18 on 18x8.5!

[@ppa601]

TheRx8guy thanks for the likes!

[@leo-er5wx]

@@ppa601 hey bother do u have to change the shock or wiil they work when lower?

[@suelo_abuelo8066]

Yo did you do anything about the rear bump stops? Or does it ride on the bump stops?

[@AEON.]

Yo, do them lowering blocks have to have an angle on 'em for a 2nd gen chevy s10 extended cab? Because I'm sick of having to change the carrier/hanger bearing on the 2 piece drive shaft. It's the biggest pain to have to deal with. The only thing I can think is because it's an extended cab, it needs to be angled different than regular flat blocks. And if it does need angled blocks (I have 4") - does the shortest side face toward the cab or toward the rear of the truck? Any help would be appreciated! Also I got Chevy Xtreme wheels on mine - just gotta open up the center a little bit them to fit! I used a corded drill with a piece of wood that has a long extension that goes through it - it's about 4 inches thick and just glue some decent sandpaper on it. It's 4 inches long because there's a slight bevel on the end so it can start off and further you go - the wider the hole gets. I just used a paper template and put it over the hub to get the right size I needed - cut the hole with a razor - then used paint on ink so that when that ink was gone - i knew i was done. then polish it up some and bam! Only thing that SUCKS about Chevy Xtreme wheels - are they are wide - 235/55/16 (s10 xtreme) and 235/60/16 (s10 blazer xtreme) - The tires are HARD TO FIND! Even HARDER to find used and in good shape! But it does handle better with them! Just make sure you add some silicone or something to the center caps - people like to steal 'em and if you don't, they are going to fly off - because that's just the way it is! I just put a couple beads with a culk gun of clear silicone after cleaning it real good. Anyways there's a custom tip to trade - Again, some one please help and drop some knowledge!

[@Cryptonaut11]

The short side of the block faces forward toward front of the truck

[@AEON.]

@@Cryptonaut11 Thanks for the info man

[@justinpardini8160]

Damn where you located need you to help. Awesome video bro. And T.I. is always good music lol

[@pairsnpaint]

Nice truck and nice video! I love the stance, but would like a bit more tire, especially sidewall. With an 8.5" wide rim, how wide a tire can you go with the IROC rims and not rub with this setup? Also, would you recommend using drop spindles and 1" springs instead of 3" springs?

[@owenrook6467]

Did you do anything to correct pinion / driveshaft angle??

[@pspgamerserjio]

Very cool, I'm thinking about doing this idk if I should because it's pretty pricey and still gotta fix some other stuff on it

[@grapplerguy2007]

not pricey doing it like this. just a set springs and a block kit 40 bucks maybe. If I went through what he removed might as well do drop spindles and lowering shocks . belltec. but this wasnt an expensive drop

[@pspgamerserjio]

@@grapplerguy2007 ehhh well I decided not to drop it so I just bought replacement parts and recently finished the whole front suspension

[@oscarmendoza9938]

What’s the brand or style name of the rims?

[@DUDEfreestyle]

Can we get update video sir? Nice truck btw and very informative video. #MiniTrucks

[@ppa601]

Outdoors&Cars the guy has brought it back saying the front is too low. He is getting caught on speed bumps due to the brackets on the frame rail for the transmission.

[@limedime03]

What wheels and tires are you running on your truck? Those look real good on a sdime.

[@luispatino2477]

Where did you get the front and back kit

[@LetzRideCarAndTruck]

Are they 20in wheels? Truck looks clean man i wanna do this to Sonoma

[@ps7850]

Where did you get those wheels from

[@LargoC]

That looks sweet.

[@sidneystapleton3518]

Thanks for the video nice idea I wanted to know what’s the name of those rims and what size are they

[@ashtonboyd4065]

Just look up iroc camaro reps

[@ashtonboyd4065]

I have some on my truck and theyre 18s

[@robertw5008]

Do you need wheel alignment after doing front on 4.3 vortec rear wheel drive?

[@anthalisciousGTP]

yeah would highly suggest cause the drop will add some camber

[@thtdiego9296]

whenever doing any type of suspension working or just tampering with the tierods, always go to get it Aligned or check

[@68bluechevelle]

On your rear blocks are they taller on one side then the other? Mine are taller on one side and I put the taller side facing towards the back bumper. I hope that's correct and don't throw of my drive shaft and put strain on my transmission.

[@grapplerguy2007]

should used lowering shocks anyways. prob couldnt because of tire size but blocks only in rear I bet rides like a%%

[@AEON.]

​@@grapplerguy2007 Yo, do them lowering blocks have to have an angle on 'em for a 2nd gen chevy s10 extended cab? Because I'm sick of having to change the carrier/hanger bearing on the 2 piece drive shaft. It's the biggest pain to have to deal with. The only thing I can think is because it's an extended cab, it needs to be angled different than regular flat blocks. And if it does need angled blocks (I have 4") - does the shortest side face toward the cab or toward the rear of the truck? Any help would be appreciated! I know there's flat drop blocks and angled drop blocks. Alberto - you have the same problem as me? if you do have a vibration it's not your transmission on extended cabs - it's your carrier/hanger bearing getting worn out - - maybe try the angled shorter side facing the rear and taller side facing towards the cab. - I cant get a straight answer on the proper type of drop blocks to use haha!

[@d-pinnit77]

What size tires and rims are you running on that?

[@nifficence]

Good Job!!!!

[@fokuz02]

What did you use to paint the frame?

[@sandysandor1699]

What kind of paint is better for drums????

[@arireid1245]

I use engine paint.

[@83malibuwagon]

If you're not reusing those U bolts it's 10x easier to just cut them off with a grinder

[@AEON.]

word - and they are not meant to be tightened down more than once - they'll cross thread and one good bump will snap 'em off and fk up your day!

[@ElGuero227]

Link for the kit???

[@jesusfuentes5770]

Rim size?

[@jcruz0208]

What tires are those?

[@Principlesofpleasure]

Bro your the man thank you so much going to slam my blazer what size are those irocs?

[@ppa601]

Stance Lives Matter. Do it man! Well worth it ! 18x8.5

[@Principlesofpleasure]

@@ppa601 took your advice got my 3/4 drop kit today from fed ex 😎 video will be up soon forsure👍🏽2 questions did you put the front shocks back in ? If not does it bounce without them ?

[@anthalisciousGTP]

there goes them ABS lines 🤣

[@pspgamerserjio]

I bet it's the same as lifting it, on other cars I seen em almost ripping 😬

[@gearheadhuff7853]

How does it ride & handle

[@ppa601]

GEARHEAD HUFF fairly decent! Customer recently told me he loved it but he is a little older so getting in and out Is rough !

[@jerrygonzalez5286]

How much does It cost???

[@AEON.]

40 bucks or so for drop blocks and u bolts - for the front around 200 bucks for a decent set of drop spindles and different springs.

[@MrRibbit789]

"Those are probably hot" 😂😂😂😂😂

[@timothywhite9989]

can you please send me a link for this kit

[@ppa601]

timothy white I purchased it through air slam it

[@jonmoore9839]

What Wheel and tire combo is that nice truck

[@edwardzx7]

Y’all keep asking the same question that already has been answered!

[@lukesthedrifter2809]

Should have trimmed the ubolts down 👍🏼

[@ppa601]

lukes the drifter you are def right about that! Would’ve helped for sure

[@MrPacoloco75]

Please an update

[@michaeltwitty154]

RIP wheel speed sensor😢

[@skys2450]

What size tire

[@ppa601]

Austin Hannah hey 215/35/18 on 18x8.5

[@OscarLopez-sb8gv]

Could have just cut the u bolts they give you new ones

[@elijahgooch1077]

Whst rims and tires are those

[@tysmith3915]

😂😂 ball joint boot flys off

[@gurrolamatthew67]

Abs line ripped off

[@aww4954]

Great truck horrible video.

[@MrRibbit789]

Better than no video