Installing 4 solar panels for Ecoflow Delta Pro

[@yoansanchez4241]

I noticed that you are not using the mounting feet provided my eco flow solar panels 400 wats.

[@351HOON]

Quick and efficient, Good Job.

[@aflipzkidn]

Hey thanks for the video, you made that look easy. How did you locate the studs/rafters under the shingles. Also is there a video showing now it was wired from there to the delta pro?

[@michaelfernandez7805]

Is there a film attached?

[@richarda6435]

You mention getting close to 1600 watts with this 2S2P array, but given the Delta Pro 15 amp limitation, it seems you'd only get around 925 watts? I ran the numbers from those specific panels.

[@jessejamesmorales5016]

Sooo what's a good panel setup. I'm looking for a good setup

[@yoansanchez4241]

I do have recommendations.

[@punksjutgbd]

Very nice. Did you wire in series and parallel because of the voltage requirements of the EcoFlow Delta Pro?

[@SolarEngineering]

yes, specific for Delta Pro. thanks.

[@richarda6435]

This great work and is exactly what I'm looking to do for my Delta Pro setup. Too bad you're not in Virginia. Do you have a parts list of the IronRidge items you're using?

[@SolarEngineering]

XR-10 rails IR-FF2-02-B2 IR-BHW-TB-02-A1 IR-UFO-CL-01-B1 IR-UFO-STP-30MM-B1 IR-XR-LUG-03-A1

[@richarda6435]

@@SolarEngineering Thanks! That's awesome.

[@andys5203]

Awesome video. Can you tell me if a pvc junction box can be used ? Do you have a link for the metal junction box. Thks😊

[@SolarEngineering]

Yes, you can use a PVC box as well, however, the conduit should be metal (in the US at least). For metal box homedepot link: www.homedepot.com/p/Commercial-Electric-2-Gang-Metallic-Weatherproof-Box-with-3-1-2-in-Holes-Gray-WDB350G/300846204 And thanks for the feedback.

[@andys5203]

@SolarEngineering Thank you sir.

[@tlteal]

What is the spec of the panels? You said 395w? What is the VOC on those?

[@BigdaddyRod]

Great job thanks

[@resnick11]

where do you buy your individual parts for the iron ridge? do they ship?

[@SolarEngineering]

you can everything online

[@yoansanchez4241]

What’s the web site to order the parts?

[@lxquang5892]

Hi do you know any fellow installers in Dallas, TX? I am seeking for someone to install the system for my Ecoflow generator.

[@chineduedu2097]

Let me know if you ever find one

[@lxquang5892]

@@chineduedu2097 I found one who did a good job. Lmk if you are still seeking for someone

[@AutoTuned]

Legit bro. Thank you. Fun stuff

[@SolarEngineering]

Glad you enjoyed!

[@mikel3591]

I have squirrels that run and cause damage on the roof in the warmer months. Do you know if this setup is relatively safe from squirrel potentially damaging the cables underneath the panels?

[@SolarEngineering]

to protect wires you can install something like this: amzn.to/3Tk15Vb I did install it once, it takes a little bit of time to install, but worked well.

[@mikel3591]

@@SolarEngineeringThank you!

[@ekolto]

What tool were you using to carry the panel onto the roof?

[@SolarEngineering]

solartoolsusa.com/solar-panel-caddy/

[@ekolto]

@@SolarEngineeringthank you! And great videos, I can tell to take pride in your work.

[@LogosVVV]

Ярко выраженный русский акцент. :)