Installing a T-Style XL into a 13-18 Dodge Ram

[@davidgold5961]

16:18 That connector is called FAKRA. It makes things easier if we use the correct terminology. Thanks for the video!

[@Sharloboy]

I have left and right blindspot cameras installed in my 2015 Ram 2500 (Laramie) it is connected to a PAC Intelligent switcher that allows me to switch from the rear camera to the sides whenever the turn signal is activated. Will this work with this unit? Or is there a multi camera feature available for left and right blind spot cameras with this unit that Linkswell offers?

[@LinksWellInc]

It depends on the PAC part. If it’s specific for a Dodge Radio I don’t think so. If it has a universal RCA output then it should.

[@Sharloboy]

⁠@@LinksWellIncYes the outputs are the standard yellow RCA connectors and it plugs into a PAC BCI-CH41 interface module that has a harness to fit the RAM radio. Would this harness fit the T Style XL?

[@LinksWellInc]

@@Sharloboy I really would have to see it. Chances are you will not need it because you will just plug the RCA directly to ours. Without seeing it I can say for sure though

[@kylebarnard4042]

I've had the PAC installed on my Ram as well with my blindside cameras, but I opted to go with the linkswell multicamera adapter and I have to say it's worlds of difference and way better! I've also added eight cameras on my truck now including the chassis and fifth wheel and cargo camera and dash cam.

[@BeingPrepared05]

⁠@@kylebarnard4042 I just installed this unit and how do I go about getting the cargo camera back. I have a factory installed one. I also have the linkswell camera adaptor. Thank you

[@ecd1678]

Definitely need to do a video installing this in a jeep gladiator

[@MrSwift05]

Wow cool but at almost $4.000.00 New Zealand dollars that's Crazy

[@LinksWellInc]

So we are a US based company so what it would cost to get it outside the US we couldn't really say. In the US its $1,995

[@Thir_D_Three]

@LinkswellInc, I'm in need of assistance. My screen went blank yesterday. Nothing out of the ordinary happened prior to the event. It has not come back since. It's mid summer, and now I'm without AC. I sent an email to tech support as well. Need help!

[@LinksWellInc]

@@Thir_D_Three press the RST button on the face of the radio with a paper clip

[@Thir_D_Three]

@@LinksWellInc First off.. Dammage, never knew that was there! Always in the drivers seat and didn't see it. I was pressing and holding all the soft buttons trying to do that very thing. Thank you, It worked. I will respond to tech support. Much appreciated.

[@LinksWellInc]

@@Thir_D_Three no problem.

[@williammartinez2156]

Why didn't you show use what your doing??? from 6:00 to 10:00

[@LinksWellInc]

In an attempt to save time on the video. I explain and show what I did right after. Was what I felt would communicate best. If not apologies. It’s always a wrestle between time and details. I try to find a balance each video.

[@iandefilippo]

Agreed

[@birdman2514]

Is this compatible with the 2017 ram rebel?

[@LinksWellInc]

@@birdman2514 yes it is.

[@iRemainNameless]

Beautiful. When can I install this in Canada? Does this use Android as well? I would choose the LInkswell because it offers angle, pitch and yaw on the dash. That is excellent, and it looks a little different than the standard Android screen upgrades that I've seen.

[@LinksWellInc]

They are Android based yes. You can see some of the Android features in some of our other videos. So we have a distributor in Canada by the name of Automobility. If you contact them they could check for the closest dealer to you.

[@benben6054]

I need it

[@kellycostello2930]

I would like to see it switched to night mode

[@Terminator_888]

Will this work on 2021 ram classic?

[@LinksWellInc]

@@Terminator_888 yep

[@Vetsgotyoursix]

Does this radio have the same factory setting access as the oem radio, the rebels have air suspension functions in the menu. Will these still be accessible.

[@LinksWellInc]

@@Vetsgotyoursix yep it does.

[@uriel43x]

Where can I purchase

[@LinksWellInc]

From any of our Authorized Dealers. We have a find a retailer tab on our website www.linkswellinc.com

[@victorialynn961]

What if you have the 2016 that has just the hazard button above the 3 knobs of climate control

[@LinksWellInc]

@@victorialynn961 should be the same. It will work on all 4 different climate control options Dodge made.

[@TheCanineGuy]

Have a link for same truck (18 Ram) install?

[@LinksWellInc]

@@TheCanineGuy I am not following what you are asking for?

[@JoshStreetDesign]

I have a 2016 Ram 1500 with an engine tuner module hooked up where I can change the engine characteristics, such as sport mode, eco mode, tow mode, etc... I control that module with the steering wheel buttons. If I install this will it disable being able to control that tuner?

[@LinksWellInc]

It might. Anytime you add multiple CanBus devices into a vehicle that change code there is a possibility that one will effect the other.

[@mendozillah6501]

I’ll find out for you… I have a pulsar chip installed and I’m going to be installing the xl at home in my driveway. Fingers crossed that they agree with each other, if not hope a dealer can help!

[@mikereaulo2359]

where can i purchase this from? either online or in store would be nice. im located in charleston sc

[@LinksWellInc]

Our website has a find a retailer tab. Use that to locate a local dealer. www.linkswellinc.com

[@mtb4066]

I have a 2013 ram 3500 with the bed camera. Can I install this and keep the cargo cam?

[@LinksWellInc]

You can if you add a camera switcher. Dodge has 2 separate video signals going into their radio. We only have a single reverse input. So you need some sort of camera switcher. Like a PAC Vs41 or the like.

[@coryabeel7160]

We need more Content! Let’s get some more shorts out with this new T style XL. I want to order one for my newest generation ram 1500 the very second that it drops. Can you please comment with your online retailer? I would like to order one directly from them.

[@LinksWellInc]

It's show season, so we are swampped with the shows and prepping for shows. Content will come soon though. We have 2 online dealers ADC Mobile and FNA Automotive.

[@oscarmadrigal-h2u]

Do you have an authorized dealership that can install this unit on my ram 2500?

[@LinksWellInc]

We do. There is a find a dealer tab on our website that will list them closer to you by zipcode. www.linkswellinc.com/find-a-dealer/

[@wakemanfam4143]

Where are you guys located? I need to get this thing installed ASAP

[@LinksWellInc]

We do not sell direct retail or do installs for retail customers. Use the find a retailer tab on our website to locate the nearest authorized retailer. www.linkswellinc.com

[@CuttDogb]

Question i have a 2017 Ram 3500 it has the factory reverse cam in the rear view mirror so will it be able to be converted to the radio as well

[@LinksWellInc]

If you purchase the harness that brings the signal from the mirror to the radio.

[@robertavendano3532]

Dang no links how much

[@LinksWellInc]

So we do not sell direct to the retail public. We have a find a retailer tab on our website that sells I’ll get you connected to one of our authorized dealers. MSRP for the XL is $1,995

[@TEEACHONE]

Can you add the V300 Tuner to the XL to keep receiving the signal from Sirius/XM

[@LinksWellInc]

No. The only radio we have that is SiriusXM Ready is our Gen 5.

[@shiningstaer]

I sure wish you didn’t do one that sticks up 4-5”. A 13.5” would’ve been more than efficient. Hahaha danget you would’ve had one sold

[@LinksWellInc]

To each their own. We have the normal T-Style for the factory look. And the big one for the extreme look.

[@shiningstaer]

@@LinksWellIncyou said with that bezel you created it can be raised or lowered? Can this come lower?

[@LinksWellInc]

@shiningstaer no we didn't make it to be lowered. We made it sit as low as possible so it doesn't stick up as high.

[@mtc-tech]

How fast is backup camera available on a cold start? Does it work with the factory microphones above the driver for calls?

[@LinksWellInc]

Camera is available right at start up. We don’t retain factory mics. You need to use our microphone.

[@CoryFritz1]

Quick boot, a physical dial and wireless car play? I've been holding out from buying one because of those 3 features being missing. The only thing else I could wish for is sirusxm support, but if all the other features are in gen 6 regular size I'm making the jump!

[@LinksWellInc]

Gen 6 will have all the hardware upgrades as far as processor and what not, but will not have the dial. The dial is only on the XL that is in this video. With Sirius XM we have to start the entire process over again with the new hardware parts. So another 18-48 months before this new platform will see SiriusXM. Currently the only radio that is SiriusXM Ready is our Generation 5 T-Style.

[@CoryFritz1]

@LinksWellInc okay, will it have quick boot? Fingers crossed 🤞 for gen 7 having the dial lol

[@nrolled2888]

2018 Ram 5500 Tradesman…what are my options?

[@frankymontero1969]

Hey can you provided me the link to buy this Display please, thanks in advance.

[@LinksWellInc]

We do not sell direct retail. We only sell to authorized dealers. You can use the find a retailer tab on our website to find a local dealer. Or you can order through one of our shops with and online store like www.adcmobile.com or www.FNAautomotive.com

[@lrbs6237]

What is the price of the radio? I could not find a price online.

[@LinksWellInc]

MSRP starts off at $1,995. We don’t sell direct. All purchases have to go through one of our authorized dealers. We have a find a retailer tab on our website that will list our dealers closest to you by Zip Code.

[@redsnapper250]

Will I still have all the factory controls that I have in my factory unconnect system? In my factory unconnect I can change pretty much all settings for all electronics in my truck. Thanks

[@LinksWellInc]

We retain the majority of the vehicles settings yes. Anything that we can reproduce with the UConnect module removed. Anything that would be specific to UConnect will be gone because you are removing the UConnect module when installing an aftermarket radio.

[@MohammadHarisMania]

Do you guys have this for gmc sierra 2018?

[@LinksWellInc]

It’s coming soon.

[@donlopes3373]

Can this be installed in a 2019 Chrysler 300S ?

[@LinksWellInc]

No. The systems are built with dashes. The 300 has a very different dash

[@haleemendoza9448]

all the harnesses shown in the video come with the radio when you buy it? or you have to add in addition to the radio?

[@LinksWellInc]

Everything in the video for the install comes with the radio

[@datguy6502]

How could I get this to work in a 3rd gen 1500

[@LinksWellInc]

I don’t know what years a 3rd Gen is

[@datguy6502]

@@LinksWellInc 2004 ram 1500 5.7

[@LinksWellInc]

@@datguy6502 so you may be able to make it physically fit. But none of the electronics will work. So no climate controls, SWC, factory settings. All that is specific for the 13-18. O4 is worlds different

[@datguy6502]

@@LinksWellInc appreciate the help bro 👍🏼 I’m not sure I’ve seen it been done and I was wondering how I could get it to function properly.

[@LinksWellInc]

@@datguy6502 you would have to rebuild it all.

[@stevenmcphee8700]

Is it possible to have the side panels color-matched with the longhorn interior? Thanks

[@LinksWellInc]

If you painted them. But we only manufacture them in the black.

[@ricadocharlemagne3943]

Are you going to make one for the jeep grand Cherokee

[@LinksWellInc]

@@ricadocharlemagne3943 an XL? Not at this point in time. The sales for that application are too low to justify the tooling costs

[@wearerxlics]

Any consideration to make a version for the Nissan Titan / XDs?

[@LinksWellInc]

No plans for one at this point in time

[@virgiliobalmori]

Can you add virtual upfitter switches?

[@LinksWellInc]

Check out our video from KnowledgeFest. I show our radio using the Trigger Controller. There is no physical outputs from the radio itself. But it can run an app that controls a remote up-fitter switch.

[@garrinperrin4701]

Can you play movies on this?

[@LinksWellInc]

Yes. Either using USB or your favorite streaming apps like Netflix, KZbin, Prime, Disney Plus and so on. We have videos showing this here on our channel.

[@garrinperrin4701]

@@LinksWellInc these work on 2016 dodge ram eco diesels also? Sry for the generic questions

[@LinksWellInc]

@@garrinperrin4701 yep

[@FlexinReels]

How much does this cost ? Doesn’t say on website

[@LinksWellInc]

MSRP is $1,995. We do not sell direct to the public. To purchase you would contact one of our dealers. That is why we don’t display pricing.

[@KingManga360]

Would this unit capable of having multiple cameras?

[@LinksWellInc]

The radio has 3 inputs. If you want more than that you need a camera switcher

[@KingManga360]

@@LinksWellInc okay thank you

[@glenng.6041]

how do you make the screen go off by itself after a minute?

[@LinksWellInc]

The power should go off after you open the door like the factory one.

[@homercan2]

Is there an ETA when Gen6 and XL will be available for GMC, i was literally about to purchase a Gen5 for a 2017 sierra.

[@LinksWellInc]

Gen 6 should be available in like 30 days. The XL will probably be 45-90 based on the fitment testing for the final bezel design.

[@corylango2120]

Is there a video out for the installation In the GMC. I just received mine but cannot find an installation video and the instructions are a bit incomplete. Thanks.

[@homercan2]

@corylango2120 it's very similar to the previous Gen's, ADC mobile has a detailed install on a Gen4 which is what I went by.

[@richarddiaz8248]

Where can I buy it 2018 ram

[@2006mpcg]

Can you add subs and amps to this radio

[@LinksWellInc]

Yes. We have front, rear, sub RCA preouts as well a TOSLYNK output.

[@cpt240]

How do I purchase this for my ram

[@LinksWellInc]

You can purchase through any of our Authorized Dealers. We have a find a retailer tab on our website that you can use to find the dealer closer to you. Or you can purchase through one of our online dealers like www.adcmobile.com Or www.fnaautomotive.com

[@dieselawake]

Has there been any issues with the 14-18 Rams? Is there a newer model now?

[@LinksWellInc]

This is the newest model we have.

[@dieselawake]

@@LinksWellInc ty!! Any interference with Cummins Ezlynk?

[@LinksWellInc]

@@dieselawake there is a possibility unfortunately. Any tuner that changes data in the CanBus has the potential to effect other 3rd party parts like our radio. We have had our radio in vehicles with EXLYNK with no issues. And we have had some with issues.

[@dieselawake]

@LinksWellInc thanked again!

[@alexlopez2439]

Can you please make a video on troubleshooting the Sim Card. I’m having connecting issues.

[@LinksWellInc]

What provider? AT&T?

[@alexlopez2439]

Yes AT&T

[@LinksWellInc]

@@alexlopez2439 AT&T has been a nightmare. Email me [e-mail] and I will send you a few things to try.

[@alexlopez2439]

Okay will do

[@BeingPrepared05]

@@alexlopez2439 I tried AT&T and gave up and went to t mobile for $10 bucks a month. And that is the only line I have with them

[@Morningside-ik4jc]

So it works with the Sony sound system package and also retains steering wheel volume and seek controls and heated steering wheel?

[@LinksWellInc]

So I don’t know of a Dodge with Sony? Do you mean Alpine? If so yes. You will lose fading. I have a video talking about the factory amplified systems.

[@kylebarnard4042]

​@@LinksWellInc Can you link to that video please!!

[@LinksWellInc]

@@kylebarnard4042 kzbin.info/www/bejne/qYTGo2mgbdmhg6ssi=RnVqfPqpLuKH0piN

[@svenantemann]

Version going to be available for the 4th gen 2500 6.7 laramie trucks?

[@LinksWellInc]

I don’t know what years that entails. What year?

[@svenantemann]

@@LinksWellInc 2013 2500 ram laramie longhorn 6.7 with the alpine uconnect system.

[@LinksWellInc]

@@svenantemann 13 is a split year, so if your 13 has the same dash as the 14. This will work. If your dash looks like the 12 it will not.

[@svenantemann]

@@LinksWellInc great! I shoul be good. Can't wait for the release!

[@kelseylantzy]

ETA on gen 6 or XL for jeep wranglers? Have a 4xe and i am just waitiiiing on a head unit that supports it.

[@LinksWellInc]

We are testing an adapter to retain the Hybrid pages. Our current radio will work with it now. Just doesn't have the Hybrid pages. This adapter will add them though. Will only work for Gen 6 and XL. Both should be releasing in 30-90 days.

[@kelseylantzy]

@LinksWellInc I don't even use the pages and i love the more flush look of the 5 but looks like the gen 6 has wireless car play and can handle back cam and front trail. Hmmmm

[@LinksWellInc]

@@kelseylantzy so Gen 5 has wireless CarPlay as well and is SiriusXM ready which the Gen 6 will not be. But Gen 6 will be faster with the new processor.

[@kelseylantzy]

@LinksWellInc you just made my decision harder bc I do use serious xm and love wireless android auto. I'll let you pick. Lol

[@LinksWellInc]

@@kelseylantzy so the only model that we will have that is XM Ready will be the Gen 5. It will have wireless CarPlay and Wireless Android Auto. You can watch the videos of it working on the channel here.

[@MegaPhonecat]

Do these work with aftermarket amps

[@LinksWellInc]

They do! We have Front/Rear/Sub RCA preouts as well we have a TOSLYNK output.

[@gilhernandez605]

do you sell the kit and the radio?

[@LinksWellInc]

All of our T-Style Radios are built to be installed into the specific vehicle. So our radios come with all wiring and mounted needs for a standard install.

[@Damian-qn5fz]

How much is this?

[@LinksWellInc]

MSRP for the new XL will start off at $1,995.

[@wisper8089]

Are u guys going to offer different color bezels.

[@LinksWellInc]

Currently we have black. I do not know if we will make more color options yet.

[@straightfromthebarrel5393]

It would be nice since it would look off on the longhorn that runs a rose gold bezel.

[@LinksWellInc]

@@straightfromthebarrel5393 so all the cushy on colors are incredibly hard to match aftermarket. Sometimes it looks worse trying to match then not. Which is why we haven’t decided

[@hashimaltabtabaee1696]

Release date for this product for 17 ram ?

[@LinksWellInc]

Released last Friday!

[@hashimaltabtabaee1696]

@@LinksWellInc I checked the dealers they must of still not received them. Because i see only the other generation

[@LinksWellInc]

@hashimaltabtabaee1696 a dealer will only have one if they ordered it. We don't send out produ to unless a dealers orders it.

[@richarddiaz8248]

What the cost

[@LinksWellInc]

@@richarddiaz8248 MSRP starts off at $1,995

[@chamakese55]

Man i wish this retained factory stuff.

[@LinksWellInc]

It does. What factory stuff do you wish it retained? We have all the factory settings menus, cameras, steering wheel controls….

[@chamakese55]

@@LinksWellInc mics, satellite radio, I don't want to rely on cell service to listen to sxm off the app. 2 hours of my drive to work is bush cell service.

[@chamakese55]

I only see it's on your 5th gen. So I may opt for that.

[@LinksWellInc]

@@chamakese55 so no aftermarket radio can retain a factory SiriusXM radio. 1. The tuner is inside the actual radio that gets removed. So the tuner is gone. So there is no way to make it work. 2. SiriusXM requires all aftermarket radio to use their V300 tuner. That’s the rules. We don’t make them. Our Generation 5 T-Style is XMReady and can run that V300 tuner. This radio will not. It is in the process of getting into the approval through SiriusXM which is anywhere from 12-36 months long. So following Generations of the XL will one day offer the same. Not because we didn’t want to but because of the way SiriusXM regulates it all.

[@LinksWellInc]

@@chamakese55 correct. The process with SiriusXM takes roughly 12-36 months to get your approval. Because the Gen 6 and XL have a new faster processor they consider it a completely different radio so the process has to start all over. Gen 5 will work with SiriusXM’s V300 tuner. As for the Mics there is a long reason why we don’t. Boils down to quality control on our end. We can’t control what isn’t ours or we don’t have access to its details. So to offer the best function. We use our own that we can do that with.

[@MFZero2]

Is there a way to play the radio automatically, instead having to click on it

[@LinksWellInc]

You should be able to set the radio in auto open in the settings

[@MFZero2]

@@LinksWellIncI didn't see Radio as an option, I'll check again.

[@dieselawake]

How fast is it compared to stock?

[@LinksWellInc]

Fast in what sense? Processing? Boot up? Reaction? I don’t understand what you are asking.

[@Thir_D_Three]

Purchasing this unit for a Silverado. Not seeing any videos on installation. Hoping for the best, but I'm a bit worried. There are many tutorials out there for Ford, Ram, and Jeep, but no love for GMC/Chevrolet. Anyone out there have any comments on Chevrolet/GMC XL units? @LinkswellInc, please chime in when you can.

[@LinksWellInc]

We have a GM set up to install in the next couple weeks. Harder to find around us for what ever reason.

[@Thir_D_Three]

@@LinksWellInc Thanks for chiming in. I can't be the only Chevy guy out here. Looking forward to your vid.

[@LinksWellInc]

@@Thir_D_Three so I have an install manual for the Gen 3 on our website. The process is near identical. If it helps in the meantime.

[@Thir_D_Three]

@@LinksWellInc Hello again. I have my unit installed now. Whenever I hop out to Linkswell TechSupport via chat, I never get a reply. From the email option, I never receive a reply there either. Do I have to take any concern I have directly to the dealer?

[@LinksWellInc]

@Thir_D_Three dealer is your best and first help. Sometimes the chats get lost. You can keep trying there as well. The tech sometimes just doesn't work right in getting the messages to us