Installing A Tank Heater and Hooking Up The Cab Heater On The Farmall 806/ Chopping Corn Stalks

Рет қаралды 24,019

Trinity Dairy

Күн бұрын

Пікірлер: 152

@derrickzenner9300 28 күн бұрын

Pipe looks good. Nice tractor

@KellyBenedix Ай бұрын

She will clean up. Those tractors are bulletproof!!

@9875z Ай бұрын

your channel came up as a suggestion from youtube. have started with the oldest video's. enjoying the nature of your lifestyle.

@trinitydairy Ай бұрын

Glad you found us!

@davidegoebel6641 Ай бұрын

You should put a couple of quarts of automatic transmission fluid in it. That works really well for cleaning the fuel system up.

@johnbeam-d3v Ай бұрын

Thank you for a really good video. Dude, you are a very smart guy to know what you know about those engines. Wish I had your knowledge 40 years ago. Thanks for the ride. You guys have a beautiful family and I love one of my grandsons setting on my lap watching your video and explaining whats going on. Thanks for the ride.

@timhoneycutt2583 Ай бұрын

It is sounding better! I know a heated cab will be nice in your part of the country

@terrydarow8401 Ай бұрын

Nice job Andy pays off to b patient job well done love your videos ❤ and God bless y'all

@MikePenner-s6f Ай бұрын

Nice seeing the 806 in the field give it a paint job and get that darn yellow off there you and your family have great Thanksgiving

@douglasrusselljr7707 Ай бұрын

Fun to see a stalk chopper in action again. Did alot of it growing up. Got a chopping corn head several years ago, my mainly to save time.

@redbrother Ай бұрын

Good fix with the socket idea, straight pipe is cool on it! Nice international 👏

@kmnmalaska Ай бұрын

Nice job Paul. Kids raised on dairy farms just know how.

@martinwangen-gl3hg Ай бұрын

Our 806 has a block heater in one of the frost plugs, it's worked great for over 50 years.

@richardharms8748 Ай бұрын

Good video folks. I've used automatic trans fluid in my semi to lube and clean. Trans fluid has detergent in it. Get that motor to operating temp. And it will be good I'm sure. Thanks for sharing.

@oliversorensen5178 Ай бұрын

Excellent program again thank you

@gatorguy7711 Ай бұрын

Nothing like bringing her back to life! Good content! Take care and be safe...

@Chris-ts8oh Ай бұрын

All u need now is a couple of older Aliss Chalmers like we had in the 80s they were good tractors especially for disking .

@lesterhertel2945 Ай бұрын

ANOTHER VERY INTERESTING VIDEO THANK YOU ALAN GOD BLESS YOU AND YOUR FAMILY😊😊😊😊😊😊

@Allischalmers7010 Ай бұрын

I love seeing the old iron still out farming we run 7000 series Allis charmers I raise beef cattle and use all old iron it is 100% fact chrome don’t get you home!!

@guydaubenspeck9206 Ай бұрын

Fair warning my friend I'm going to steal that line Chrome don't get you home I love it !

@VanSmith07 Ай бұрын

I have an Allis 200 and a 7000 and I couldn’t agree more. Fuel efficient too!

@Sneaktoca Ай бұрын

Love you vids my family just got out of dairy in April we were milking 70 in a tie stall

@angelahorne867 Ай бұрын

Awesome job. Love your show ❤

@alfredomarotta6604 Ай бұрын

Happy Thanksgiving 🦃 to you, your family, friends and subscribers 🦃🙏🍻

@kevinwittstruck8764 Ай бұрын

Hi good evening trinity dairy from Indiana

@toddvandyke1023 Ай бұрын

Another great video. I'd like to wish you and your family a Happy and Blessed Thanksgiving. Be safe, and God bless.

@markflick1641 Ай бұрын

Great video Al .👍

@DickAnderson-k9y Ай бұрын

Tip that I like to share. On the engine heater. Instead of having it plugged in all the time and wasting electricity. I put a cheap timer on then have set to turn on automatically 2 hours before I plan to use the tractor. So let’s say you plan to run it at 8 am then it will turn on 6 am and shut off at 8 am. Then the other 22 hours out of day it’s not using electricity. It saves me at least 1 dollar a day. 120 days or more when you need it plugged in over the winter adds up. Good job installing the heater

@evivant Ай бұрын

💯

@joutdoorsmen23 Ай бұрын

Thanks for sharing your experiences, Happy Thanksgiving, May God Bless You and Your Family Always

@jaycool7805 Ай бұрын

Hope your enjoying the new tractor? Thanks for another video.

@KendalLowe-j1x Ай бұрын

Sounds like it’s starting to clean up and come around alaen

@joutdoorsmen23 Ай бұрын

Thanks for your experiences, Happy Thanksgiving and God Bless

@leahmollytheblindcatnordee3586 Ай бұрын

Good fix. Glad it is getting the kinks worked out and hope the parts are reasonably priced. Thank you for the video. Happy Thanksgiving.

@KeithFinkFamilyFarm Ай бұрын

I tried to subscribe while you were in town gathering parts. I then remembered that I was already subscribed. Oh well, I tried. Happy Thanksgiving!. Plenty for which to be thankful! God bless y'all.

@countryboy3201 Ай бұрын

Looking good bud,nice job on the repairs.

@larrybruck2949 Ай бұрын

Good luck with the heaters! I remember helping my dad install a tank heater like yours on his JD 4020. It made a world of difference when we needed it to plow snow. That tractor started hard in July let alone January. His 4010 didn't have that problem. Didn't even need ether. Funny how each tractor has its own quirks like that. Have a Happy Thanksgiving!

@Chico-td2fy Ай бұрын

Looks to be getting fixed up 🐂🐃🐄

@CharlesPeeters-e5u Ай бұрын

It reminds me of my young days and all of you have a great Thanksgiving

@lesterhertel2945 Ай бұрын

Another very interesting video Thank you and Alan God bless you and your family 😊😊😊😊😊

@clintonchristopher138 Ай бұрын

Always good videos hope y'all have a Blessed Thanksgiving

@shawnclark7051 Ай бұрын

Happy Thanksgiving to you and your family

@timwohlert2969 Ай бұрын

Happy Thanksgiving to you all,keep up the good

@eeengineer8851 Ай бұрын

I think a neighbor had a 706 and another had a 856. Dad had a '67 Moline M670 in those years. The Cozy Cab on it for sure had no heater!! I think it was enough that the wind was off his back compared to full open station or a canvass heat houser. Did my share of stalk chopping.

@colorado1088 Ай бұрын

Any thought about replacing the glass in the door? This was one of your best videos IMO.

@trinitydairy Ай бұрын

Yeah, I plan on getting that replaced.

@michaelzimmerman5958 Ай бұрын

Love your videos I am a international guy as well looking at the front of the tractor looks like it is a little loose just looking out for you I have to 966 for hay and I have to tighten the wishbone ball nut every year god bless

@johnhenderson299 Ай бұрын

Great video

@DonWelter Ай бұрын

Hopefully some run time will help clear up the fuel issues. Once the cab heater is working properly, you'll definitely appreciate it in your climate. The diesel engine 806's were known for long life with proper maintenance. Looks like some patience and fine-tuning will put another horse in the corral. Have a happy and blessed Thanksgiving!!!

@TomNorton-wz1rx Ай бұрын

I think you have to get that engine temperature up and then work it will make a big difference,

@ralphriddle8864 Ай бұрын

Sorry happy Thanksgiving and God bless y'all

@craiggarrison768 Ай бұрын

Propane torch and pb blaster

@ernestheiniger9110 Ай бұрын

I hope you and the family have a wonderful Thanksgiving!

@ChristopherUllrich-d9y Ай бұрын

Happy Thanksgiving!

@nailbender7223 Ай бұрын

I laughed at the name zerostart. Does that mean no way it's starting or will start at zero or less.😅😅😅😂😂

@user-JamesLacy Ай бұрын

I'm like you it needs to be run under a load to help clean the sluge out. It may have been doged around and not getting up to operating temperature does not help. Good job on what you did.

@MorganOtt-ne1qj Ай бұрын

I didn't learn until a few years ago that the PreMix Antifreeze is better for the cooling system, because it uses softened and stabilized water, no minerals that can be a problem. I probably could have saved a radiator or 2 because of the "hard water" that I have. The mechanic that told me said you either pay a little now, or a lot later.

@koreymartinson7238 Ай бұрын

Use a radar temp gun on the manifold to find what cylinder is lacking. Gives you an idea where to look. Hopefully it will come out of it.

@larrykluckoutdoors8227 Ай бұрын

The 806 was much bigger tractor when I was 13 years old. Glad to see you got it running nice. As the Governor not working that true, he spent 2 months out campaigning, Or are you talking about the tractor governor not working? Dad made a hitch on the chopper so we could pull a disk behind it and save a trip over the field Take care

@trinitydairy Ай бұрын

It applies to both governors. 😂

@ralphriddle8864 Ай бұрын

Happy thinkgave

@stevenhancock7462 Ай бұрын

Have a wonderful Thanksgiving bless you and your. Family

@trinitydairy Ай бұрын

Same to you!

@NealSchmidke Ай бұрын

You might need to add an in line 12 volt water pump in your cab heater waterline to get your cab to warm up.

@rogerknapp3703 Ай бұрын

Huh, im going to investigate more on that, mine is hooked up a little differently and I have no cab heat. Wonder what's different. Thanks for the video. Would like to know if you get better heat..

@leonjennings4632 Ай бұрын

Hopefully You Can Get All The Bugs Worked Out On The Tractor. Happy Thanksgiving To Y'all Blessings And Please Be Safe ✌️

@billtodd6509 Ай бұрын

Zero Start makes good products. I've used them on my semi trucks and farm tractors since the Seventies, and they last a long time. They are sensitive to burning up the heating coils if you get low on water or develop an air pocket.

@derrickzenner9300 28 күн бұрын

On the manure pump, I wonder if you can turn the piston around 180 degrees so that it sucks the manure back into the barn a little bit to loosen the clog. When you push on a clog it gets tighter. When you suck on the clog it shrinks up. I've had some success unclogging manure pipes using this technique with a vacuum tank. Pressure would never work but sometimes vacuum would.

@jameschapman6908 Ай бұрын

Have a happy Thanksgiving!

@richardjohnson5883 Ай бұрын

A few quarts of automatic transmission fluid in the fuel works really good to clean injectors

@Chris-ts8oh Ай бұрын

A deep well socket may work.

@billamsberry7976 Ай бұрын

You could run it on the grinder mixer that will work it

@randybedker1584 Ай бұрын

If still looking for a water tank heater maybe check out BCP farming and trucking. He's out of Saskatchewan last winter or so he built a tank out of an old fuel oil tank. It has two water tanks and a fire box. Fills up in morning and last about 24 hours. Seems like a pretty simple deal.

@woodsgremlin9995 Ай бұрын

❤ the videos 😊

@HFarms1955 Ай бұрын

I would have added another foot to that straight pipe. Sounds AWESOME, But that little bit more pipe would give you a bit quieter ride.👍👍👍👍. The other comment about ATF as a fuel additive is spot on. Nice video though.

@jamesbristow5740 Ай бұрын

When you were putting the valve in the cab heat return I was just waiting for that flat head to hit the thumb... at the end when you're idling the rig down that blue color on the straight pipe is weirdly satisfying to see. Is this your only cab with heat or do the others have it too?

@trinitydairy Ай бұрын

The 1066 has heat too.

@stuartsplace100 Ай бұрын

Hello Trinity Dairy

@eriklietz9092 Ай бұрын

That's a neat funnel setup thats hooks on the fitting that is draining. I homemade something similar but it doesn't work as well as this one. Any idea where you got that one?

@trinitydairy Ай бұрын

It came with a riding lawn mower we bought, it was to drain the engine oil.

@DougFisher-j6d Ай бұрын

Happy Thanksgiving

@trinitydairy Ай бұрын

Happy Thanksgiving!

@jamesmorrison1884 Ай бұрын

Hi enjoyed your video. If no thermostat it will smoke more and no heat just my opinion. I put new valve seals on my tractor stopped burn oil. Not sure that engine has but its a idea. Have a good day .

@greatnorthernn-3154 Ай бұрын

It seems odd that the stack turned purple all the way to the top with that load. It would seem to indicate that the exhaust gas temperature is way to high. The timing advance in the injector pump must not work at all. If it was ran in this condition for any length of time it might have burnt an exhaust valve. With the straight pipe a burnt exhaust valve should be easy to hear when cranking on a cold engine. You can also crack the individual injector lines loose while running to isolate the bad cylinder. When running the hot water from engine heater to the thermostat housing you take a chance on the thermostat opening and the heated water circulating in the radiator instead of the engine block. Ask me how I know.....

@ryanbachman9227 Ай бұрын

The best injector cleaner is ATF in a diesel engine. Especially on older ones. Not sure I would recommend it in these newer ones

@edadpops1709 Ай бұрын

If that pex and tube deal won’t tighten harbor frt sells a crimper and clamp ring set for under 50 bucks.or double up on hose clamps on that ball valve. My .02.

@tankeryanker6305 Ай бұрын

Try some Conklin fuel additives best out there imo

@jamesbreault5762 Ай бұрын

Those mice love farmers . Tractors 😂😂😂😂😂❤

@zebjohnson6406 Ай бұрын

I think the 806 needs a couple hours in front of a 4 bottom plow!

@jdgarman4371 Ай бұрын

Your cab heat should come from a port off the engine water pump and return to block. Your coolant heater should be it's own system. Always run a thermostat. I put shut offs on all coolant ports in case you have a hose leak. That will be a nice rig when you get it all straightened out !

@richardhoover7569 Ай бұрын

Did you get your manure pump working?

@trinitydairy Ай бұрын

Not yet, but I think we're close.

@JeffRonsman Ай бұрын

I’m waiting for you to put him [806 ] on the plow and make some black smoke !! How’s the manure pump doing?

@trinitydairy Ай бұрын

Thought we had it cleaned out and pumping again, but it stopped again. Hopefully we'll get it on the plow in the spring.

@peterhaan9068 Ай бұрын

That miss sounds awfully 'breathy!' Betting a valve problem more than a bad injector pump or bad injector. Might be a good idea to get a compression test on the cylinders. Best Thanksgiving wishes for you all!

@timpingel9607 Ай бұрын

Were you able to get the last of your corn combined?

@trinitydairy Ай бұрын

Not yet

@jimwalker2894 Ай бұрын

It seems to just work a tractor helps more than anything

@mikebrown1188 Ай бұрын

Sounds better. Alan would you consider putting a turbo on it?

@trinitydairy Ай бұрын

Possibly

@Wilber-vm1dy Ай бұрын

Put it on the mixer

@ronmetz9172 Ай бұрын

It does sound like the miss is clearing up. With all the sludge that was in the fuel, I wouldn't doubt the injectors could have fouled. What happened to the 560? Haven't seen it in a long time. Happy Thanksgiving from the panhandle of Texas to you and your family.

@trinitydairy Ай бұрын

The 560 got sold.

@zzzzzz1220 Ай бұрын

Vor der Einspritzpumpe sitzt ein Filter . Im pumpen Eingang der war bei meinem mal zu der ging wenn er warm war nicht mehr zu starten. Nach der Reinigung lief er wieder aber ich hab danach die Pumpe überholen lassen jetzt läuft er wieder wie eine 1

@peterjackson9831 Ай бұрын

I noticed the engine seems to "chuffing" on the exhaust like an exhaust valve not seating properly. Check your valve clearances, you may have a tight valve. Also while engine is running loosen each high pressure iinjection line one at a time and listen for a change in the engine sound for each cylinder. The cylinder that provides the least change while doing that will be the weak cylinder. Might be worth a try. All the best!

@trentonromig9765 Ай бұрын

Awesome I don’t remember the 806 did you just buy this not long ago

@trinitydairy Ай бұрын

Yes

@trentonromig9765 Ай бұрын

@ oh sweet I will have to go back and watch the other videos congratulations

@anthonyhengst2908 Ай бұрын

Hard to figure it didn't have a block heater all along. Being in a Northern climate. Everything at home has block heaters. I wouldn't go without one now. A heated cab would certainly be nice come winter. Does your other International tractors have heated cabs?

@trinitydairy Ай бұрын

The 1066 does.

@aaronwilson4083 Ай бұрын

I'd be curious to see what you find on the thermostat, I picked up an 806D a few months back. The factory temp gauge is unhooked and has been replaced by an electronic one, the highest I've seen it is 150* except once I was really making it work on about an 80* day with the 15' batwing shredder, it briefly got up to 190 during a hard pull and would drop back down. Mine also didn't have a block heater but had a hose ran from the temperature sender port on the back of the head to the block drain. I mounted one off the side of the engine oil cooler, getting the cold water from the block drain and putting the hot water in the temp sender port. How well does yours start? Mine will start in the 40's but requires quite a bit of cranking and blows white smoke before it starts. Plug the block heater in for a couple hours and it fires right up.

@trinitydairy Ай бұрын

This one, seems to need a shot of either.