Installing and Adjusting The Victory Trigger For Ruger® MKIV™ & 22/45™

[@prodigy6000]

Nice trigger guys...one small issue ..you need to tap the over travel hole at 30 degrees so it can contact the frame at tangent.

[@markmasztal2253]

This is great. A well planned out video.

[@TANDEMKROSS]

Glad you think so! We appreciate it!

[@FlyboythaACE]

I really like how you explain thru the 'ooops' scenarios. If this trigger job shoots as nice as the TK I recently put into my 1022, I'm gonna be one happy guy.

[@TANDEMKROSS]

Well then, we think you will LOVE it!

[@ryanuga47]

Watched this video, put the trigger in. Already had the accurizing kit installed. Video is spot on. Very easy to do. Thanks. Talk about a hair trigger. Wow.

[@Shadow__133]

Did you had the Volquartsen or TK accurizing kit? Wondering if they are compatible.

[@ryanuga47]

Volquartsen. Works like a charm

[@jimmybeason971]

Thanks for the video!! Very helpful

[@TANDEMKROSS]

You're welcome!

[@brrrlak]

Danke from Germany!

[@TANDEMKROSS]

Our pleasure!

[@brrrlak]

@@TANDEMKROSS Finally found a dealer here in Germany that sells your stuff. Makes things so much easier, no customs no nothing.

[@OCregulator]

Santa 🎅🏻 brought me a Victory Trigger for Christmas. Yay! Outstanding video! Super easy install with Allen wrenches & Loctite. Looking forward to some range time to test it. Thank you Tyler @ Tandemkross.

[@TANDEMKROSS]

We hope you enjoy it!

[@SetsunaKai5]

I really wish you guys would offer this trigger in gold to match the stock triggers in some Mk4 22/45s!!!

[@SetsunaKai5]

Hey, I just received my Gold Victory Trigger and wanted to say thanks!

[@TheDutchShepherd]

​@@SetsunaKai5custom order ?

[@michaelbattin6717]

Tyler what a great job explaining how to install the trigger. One of the better videos in the you tube world!!!!!! thank you

[@TANDEMKROSS]

Glad it helped!

[@jamesnichols8893]

this is a nice video. I will be ordering the Victory trigger today

[@TANDEMKROSS]

Hope you enjoy it!

[@hughstewart3244]

Great instructional video. Thanks for updating it. The trigger is a great job.

[@weeteelabahbyronbay1843]

Really well presented video. Thanks, and all the best with your future.

[@TANDEMKROSS]

Thank you very much!

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼

[@alksjda]

Awesome instructional video

[@TANDEMKROSS]

Glad you liked it

[@MJMJ27]

I like the idea of the trigger, but I found in practice it causes more problems for the gun. I installed it according to the video instructions, but now the bolt on my MKIV sticks really bad while hand cycling. While charging the gun you see the bolt grab the trigger and hold it, and it takes a huge amount of force to overcome it to charge the gun. Not to mention the little set screws constantly walk out on you and then good luck finding them at the range.

[@99taws6]

loctite is your friend

[@roadblock2486]

Fantastic instructional video.

[@kurtislowe6749]

I've seen some bad designs, but the triggers adjustment set screw might take the cake

[@supersixx9916]

I'm not even owning the Mark IV yet and i'm already searching for tuning options -.- .. definitely gonna get me the Victory trigger, flat triggers r awesome + Hivegrips and the competition kit . 😭why you gotta make me poor xD

[@trentmorrison6074]

Cant wait to be wealthy enough to get that trigger, im almost done custumizing my mk4. After all the grinding and spending,im so close to making it perfected. Update: also, what part of the lower receiver deos the pre travel screw even touches? When it is screwed inwards of the trigger.

[@LangSauce93]

Is there any way to actually lighten the trigger pull?

[@RIPHS23]

The “blast pack” will reduce it to 2-2.5lb… I just installed that with my victory trigger, beautiful combo.

[@ghostgains6350]

Great video! Cant wait for my Victory trigger to arrive :) Do you know if its possible to switch the mag release button to right side for left handed hold on the 22/45?

[@TANDEMKROSS]

The mag release will not switch unfortunately.

[@jamesgroce3125]

I did the oops. Need another Ruger 22/45 Lite bolt open stop spring. Got any for sale?

[@TANDEMKROSS]

Contact customer service James, we will get you sorted! It happens haha!

[@1joken]

I was having trouble with this installation until I found this video. It's tiring watching how-to videos where a part is installed either off-camera or the viewer only sees the guys hands.

[@carolinaplinker]

How easy is it to adjust to make it run reliable

[@TANDEMKROSS]

Incredibly easy! We typically suggest backing it up to where it won't reset, and then giving the set screw another turn so it resets while you adjust it. Allows for the short and crisp pull that people go for with our triggers.

[@alparrish5660]

After you installed the new trigger, what is the pull weight? How low can you get it safely?

[@carolinaplinker]

I see these kits that have all this other stuff in it and this trigger but I just ordered the trigger do I need that other stuff or is it just something that makes it better

[@TANDEMKROSS]

The trigger will be adjustable and perceived as lighter with just the trigger due to the set screws and being able to pull from a lower point on the trigger, BUT the hammer and sear are what drop the triggers true pull weight down significantly and give you a light and smooth pull. Lot's of people start with the trigger, and then upgrade the internals once they realize that once you go flat, you never go back! Thank you for ordering the trigger. Let us know if you have any other questions!

[@JasperTielen]

Does it change trigger pull weight? And how much will it end up with?

[@TANDEMKROSS]

The trigger shoe itself only reduces perceived pull weight (how it feels) because it is flat faced and has improved leverage. The ultimate trigger kit is what you'd go for, which is the trigger shoe, hammer, and sear greatly reduces pull weight!

[@PiKLMedia]

I would love to Tandemise my 22/45 lite but I am in Australia sadly. Just this trigger would probably cost $350 and take 18months to order it because when it comes to firearms and accessories the Australian market sux. Can I order direct from you guys or do I need to be a dealer?

[@TANDEMKROSS]

We do export to Australia! We can get it to you!

[@PiKLMedia]

@@TANDEMKROSS That sounds great. Do I just order through the Tandemkross website link above?

[@TANDEMKROSS]

@@PiKLMedia Yes! And then choose "EasyExport" as your checkout option.

[@MoviesSam]

What is the pull weight of the victory trigger ?

[@TANDEMKROSS]

It varies depending on firearm. But this specific pistol is just a hair over 2 pounds with our trigger, hammer and sear. We've gotten them down to below 2, but it all depends on the tolerances of the firearm and the engagement.

[@terrynewman8070]

Were do I older the new bumper

[@JamesReedy]

Dry fire on a rimfire sans snap cap?

[@grim_potatoes4242]

Will this same process work for the MKIV target even though in the video you are using the 22/45?

[@TANDEMKROSS]

If you watch the video, he mentions the things that are different. But you can follow along to this for both the standard and 22/45.

[@enigmatic51me95]

I truly despise this trigger...the diamond pattern on the front face is ridicules to contend with...now I have to go back to stock...

[@TANDEMKROSS]

Sorry you weren't a fan of the texturing!

[@BeechSportBill]

I had an order in for a Mark IV 22/45 Lite and found out that the fascists in the Washington legislature have made these illegal due to the threaded barrel.