INSTALLING CENTRIFUGE TOURNIQUET BRACKET

[@jackmccarty1309]

Hey man, just a helpful hint, the TQ holder you have is made for a sof-t wide TQ not a CAT. The issue is the one you have in the video is not deep enough for the CAT, which causes it to sit too high and interfere with the bail going forward. I run the same setup as my duty holster and it functions flawlessly with the correct TQ holder.

[@tr7287]

I don’t think you’re correct. This TQ holder is made for the CAT. In fact, I had another TQ and it won’t fit this holder so I went and bought a CAT TQ and now it fits. You just have to fold it the right way. It’s gonna be tight but it fits. What is a “soft-t wise” TQ? You have a link?

[@jackmccarty1309]

www.tacmedsolutions.com/SOF-Tourniquet-Gen-4 Eleven 10 makes TQ holders for both models.

[@michaelpeery4221]

Yeah he’s right, that model is for the wrong tourniquet, I run both models

[@zunrue1]

@@tr7287 the box literally says "for sof-t wide tourniquet" The model he got is not for the CAT

[@tacticalministries3508]

@@tr7287 the box clearly says for SOF T wide, the CAT version is shaped different. I wear that TQ holster on my belt

[@Drone86]

“It’s not gonna get in the way” as the hood hits the TQ. See if it’s possible to set the holder lower, there were a lot of mounting holes on the back of the TQ holder

[@jonathanclaypool563]

Awesome video man did the holder come with the mount?

[@grantpurcell9922]

The ones they issue now have washers on the backside and state that the small screws attach the TQ hlder to the strut. So they provide two extra screws with washers now? Also the new ones only have two holes that mount to the TQ holder so they must want you to use their screws that they now provide with their washers. I'll try to post a pic later.

[@johnaguilera642]

How did you get the bottom screw in. I can’t seem to fit my finger in the TQ holster to screw in the other half

[@grantpurcell9922]

@@johnaguilera642 The bottom screw on the TQ holder? Work on that screw first and then the top ones. I didn't have a problem but I also have skinny hands.

[@OffDuty]

Looks legit. I'm interested to see how it performs and hopefully you find a way so it doesn't affect the hood. Great simple video 👌

[@Mlopez_602]

Looks like if you only use 2 screws and mount it lower the hood won't be affected.

[@thatgeardude]

I fixed it and it doesn't mess with the hood at all. I lowered the 1110 pouch down one notch.

[@OffDuty]

@@thatgeardude Sweeeet.

[@tr7287]

Is it necessary to take off the two plastic barrel and light caps at the bottom of the holster? Do you have to take both off or one? Thanks.

[@Chris-1742]

Where can I get this? Centrifuge doesn’t show the product on their website currently.

[@uwishucould158]

Seems bulky. How do you like it?

[@maurobonino9654]

Which support should be used to mount the hard case on a Safariland 6360 holster without torch for Beretta Px4 Storm?

[@Christian-cr5oz]

The PD I work for issues the 7000 series. I use a ALS Safariland 7360 for my Sig P226. Do they manufacture these for my type of holster?

[@thatgeardude]

Neg, only for the 6000 series rn

[@joshuabrown9439]

Volume is low but you have found yourself a new subscriber! I'm check more of your vids tomorrow

[@thatgeardude]

Yup lol working on it 🥵

[@nraines89]

I know Solomon's are probably your favorite tactical boot. Most LEO's have to wear a polishable toe on duty. What boot do you recommend with a polishable toe? Maybe an idea for a video.🤙

[@thatgeardude]

ive heard of some using the salomon jungle boots. have you tried those?

[@nraines89]

@@thatgeardude didn't know they existed.

[@chadlogan2215]

I’m late to the argument but I wear the Merrell tactical boots in a 5-6 inch(low tops). They are extremely comfortable but I would recommend the taller version just bc it messes with the pant leg getting in and out of the truck. They are a version of the MOAB hiking boots I believe. Polishable toe and all black

[@7djsavage21]

Looks good. But yeah like you said you just have to fold the tq better to get it to sit lower in the holder.

[@ralphyboy3856]

Nice Blooper Video not alot of people go this route. You made it like a rookie LOL 😝😝 Over all you have great stuff to show us. This is something i will definitely be getting. Thanks for you sevices brother

[@thatgeardude]

Ralph Lugo lol get used to it. All my videos will be like this. They are quick and I can get info out faster this way specially with how busy I am with real world stuff. Think of them like you being there as my buddy and me showing you around. Can you bring some Chick-fil-A on your way in? lol

[@ralphyboy3856]

@@thatgeardude WHAT A FATTY LOL!!! broke my Heart cause the setup doesn't work on the Safariland 7 series 😭😭

[@or6669]

That’s badass for guys like me very slim my duty belt doesn’t have enough space. But the tourniquet might fall out of the pouch

[@Mannydeleon12]

You have to literally rip it out....the TQ doesn’t fall out easily. I’ve been in fights and like I said, it has to be ripped out otherwise it stays in 👌🏼

[@chriss2981]

Do you have the negative cant on that setup from blackbox?

[@DragoChronicSmoker42]

good video, i do wonder though..if any one has went reach for their pistol and accidentally pulled out the tourniquet lol

[@martinksepka2190]

Will this work with a safariland 6360 non light bearing level 3 holster?

[@alamedacustomholsters]

Martin Ksepka kzbin.info/www/bejne/pXiqm2puaa2YapY

[@Mlopez_602]

Good idea. I would suggest some thread locker on the screws though.

[@thatgeardude]

def good idea!

[@benedictnoonan1525]

I love the videos, keep up the good work. What watch are you wearing?

[@findley9844]

Benedict Noonan it’s the Garmin tactix Charlie

[@thatgeardude]

garmin charlie

[@buddyxfren8309]

Rookie deputy here. I'd love to see you make a video on what it takes to be swat and your take on it. swat is one of those things that gets praised but never gets talked about.

[@Deftonic101]

There's an updated version of this and looks more sturdy!

[@IKRYPTONxKNIGHTI]

Is there a link for this bracket ?

[@Pauliminator]

Please put a link into the video description. Greetings from a german LEO!

[@BrandensOutdoorChannel]

uniform reminds me of Broward County

[@garthbalcom6334]

Can anyone please help in answering this, I have a Safariland QLS system for Smith and Wesson 2.0 . Non light bearing and no red dot. So I would need to purchase the TQ Strut for my holster? Any help would be great .

[@garthbalcom6334]

...S/ W 2.0 4.25 barrel.

[@zunrue1]

If you want a tq on your holster you would need the strut

[@bigtank1982]

I’m waiting for them to come in stock or gen 2! Can’t get them right now

[@tr7287]

centrifugetraining.com/product/centrifuge-training-tq-bracket-by-rdr-gear/

[@averyvenegas5077]

Can you link the multitasker?

[@policetributechannel7166]

Great video man! #thinblueline #thatgeardudesquad

[@thatgeardude]

thanks!

[@RICEY702]

If only these were back in stock

[@saiyanneo469]

They're back in stock.

[@alexf4659]

It looks like this product is no longer manufactured.

[@aburkett44]

Alexander Fawaz centrifugetraining.com/product/centrifuge-training-tq-bracket-by-rdr-gear/

[@TheVatrap]

I have a 7390 😞

[@williamdolan2673]

Dang, should've jumped on this last October when Bill was releasing it. It doesn't look like they're making the TQ bracket anymore.

[@aburkett44]

William Dolan centrifugetraining.com/product/centrifuge-training-tq-bracket-by-rdr-gear/

[@Moistnsquishy]

Lol 30 inch waist is little?

[@SubieDash]

Never in stock :(

[@saiyanneo469]

Currently is.