Installing cold side boost pipe

First of all guys, make the job easier and just take off the inlet manifold 😂 if I'd of done that to start with I would of saved myself a lot of time 👍🏻
I spoke to airtec about the problem I had with the silicone and they are in the process of sorting it for me so I'll let you know in the next vid what happens
Auto specialist pro hose -
www.autospecia...
Engine bay dress up kit -
www.ebay.co.uk...
Bonnet lock handle -
Mike Greenwood or panther mods on FB
Intro -
Music: B.there.4.u
Musician: Jef
Middle song -
Music: Pill R/B
Musician: Not The King. 👑
Outro -
Music: See You
Musician: @iksonofficial

[@shelg6082]

Recently bought a focus st. Your video is will help me a lot!

[@mastersmods]

Great news. Good luck with it

[@scottdavey9905]

Cheers for this. Waiting to do mine when intercooler arrives so 2 birds with 1 stone.

[@mastersmods]

Does make a difference tbf 👌🏼

[@jackdavid1871]

Enjoying the longer videos ash. And editing is getting better everytime!

[@mastersmods]

Thanks mate appreciate you noticing 😂👍🏻

[@styusuf5671]

Nice and detailed man, well done👍🏻 That cover over your heatsheild looks😎

[@mastersmods]

Cheers mate, I had some spare metal from making the heatshields so I made that to stop water getting on the filter 👍🏻

[@2e0msw]

nice one ash, ive just done mine i used the graham goode pipe ,awsome vid mate as usual, the mods are coming along nicely ash, its all coming together...get some more vids up mate pleaseeeeee

[@mastersmods]

Not heard of them mate, all okay with it? I've got a few more vids planned mate, one being the cross over pipe haha

[@cjmackay9804]

I did mine from underneath the car it literally took 20 mins but a good video nonetheless I look forward to what’s coming next 👍🏻

[@mastersmods]

Oh really? No way! The first time I did it I tried going underneath but just seemed to much in the way IIRC. Tbh, this was just how I did it and I found it okay. Whatever works tho really mate 😀

[@DriveWayRay]

Very informative looking at doing this myself 👍👍

[@DriveWayRay]

I’m going to after watching your video 😁

[@davecozzie1]

Hi my boost hose just arrived this morning so yours was the first video that came up.. well after seeing you fiddle with it it did put me off a little but cracked on with it. Job done in an hour! Didn’t need to take inlet manifold off I just undid both clips headlight jacked it up on drivers side. I undid dipstick that bolts onto oil filter housing and pull my rs ecu holder out n to right n was able to slide it out n same again for boost hose in reverse.. just going to give her a run see what if any difference 😜😜

[@mastersmods]

Have you got an aftermarket intercooler or stock? Mines aftermarket so it's mounted differently and bigger

[@davecozzie1]

@@mastersmods yes mate it’s an AirTec stage 2 With scoops around sides n bottom to catch air. I had to spend an hour cleaning kitchen floor as I was in n out or the missus would have a meltdown haha 😂

[@mastersmods]

@@davecozzie1 fair play mate. How's it running then?

[@davecozzie1]

@@mastersmods an honest feedback would be that it boosts earlier and quicker for me.. i had the standard pipe on with a small hose n bung before.. do seem more alert.. I fitted the 1 piece heater matrix hoses last week and were a bugger to get them to seal properly.. i had to nip them up everyday till ut stopped leaking. I have the turbo to cross over hose to fit yet but ive been putting it off becos the clip is right behind the hose out of sight and just know it will give me hassle lop

[@mastersmods]

@@davecozzie1 best thing is to take the scuttle panel off, gives you so much more room to see what you're doing ect 👌🏼

[@Focusstmk2.5]

Great vid defo going to subscribe i hated doing this mod also the turbo to crossover is a ball ache lol good luck with that mate 👍

[@mastersmods]

Both jobs are easy but because you have to take other stuff off as well, that makes it annoying. Cheers tho dude, appreciate it 👍🏼

[@Focusstmk2.5]

@@mastersmods I hated that turbo to cross over NEVER again lol. What intercooler you running mate. How you finding the exhuast

[@mastersmods]

@@Focusstmk2.5 it's a mountune cooler, basically the same as a stage 2 airtec with the fins around it to direct the air flow at the cooler. Did you take your scuttle panel off to do it? I love my exhaust mate 👍🏼

[@Focusstmk2.5]

@@mastersmods na mate I left all that on when I took the silicone pipe from the turbo off it was easy to take the drivers wheel off mate i found better access. Have you changed your recirculation valve yet 😭 there HORRIBLE man so bad lol

[@mastersmods]

@@Focusstmk2.5 yeah mate I did a video on that too. Defo recommend taking scuttle off next time, easier than jacking the car up to take wheel off, in my opinion any way

[@neil_st6073]

Oh it was you I saw on FB groups with a metal pipe in your hose. Thought it was pretty sound TBF but you got some stick eh. I took baffle out for a bit then put the pro hose silicone one on yesterday just to be safe. I changed my cold boost hose when I changed intercooler so it was easier. is your Intercooler standard?

[@mastersmods]

Yeah mate that was me 😂 I'm still waiting for my hose to arrive but the sender has been in hospital apparently 🤷🏼‍♂️ my intercooler is a mountune but it basically the same as an airtec stage 2

[@neil_st6073]

@@mastersmods Ah ok yeah I've got the Airtec stage 2 also. My hose took 2 weeks from Autospecialists. Corona and people taking baffle out caused a shortage lol

[@MrNikkib22]

Hi do you think it would be alot easier if was fitting a new intercooler at the same time

[@mastersmods]

Oh yeah 100% mate

[@qaza007qaza]

Hi did removing that baffle make any difference in turbo flutter?I'm thing of getting the new turbo pipe and crossover pipe as a whole thing with a induction kit do it all at once once my boost issues are sorted.going to a tuning specialist next week hope they can resolve the problem.great work though keep em coming

[@mastersmods]

Yes mate you hear loads more turbo noises 👌🏼

[@qaza007qaza]

@@mastersmods sweet that's what I'm after can't wait until mines running right then I can start the mods

[@mastersmods]

@@qaza007qaza what other issues you having dude

[@qaza007qaza]

Still got that bloody boost issue hope this tuning company find the fault only builds boost to a 1/4 on the gauge unless I put pedal into the carpet then goes clean off the gauge but then I get cutting from the engine so ford say no codes come up they think actuator or a crap remap??? Im in no way a mechanical so have no idea

[@mastersmods]

@@qaza007qaza arh man what a nightmare. Actuators aren't cheap either :( I would imagine a tuning company should be able to sort running issues such as boost problems so fingers crossed for ya mate

[@sixdaysontherun]

i have this pipe on mine but its lately started to collapse as i rev the car see it shrinking in size have you had any of these issues yet at all ?

[@mastersmods]

I can't say I've noticed that happen but having said that I haven't looked at the pipe while revving tbh. Is it a genuine pro hose? I know you can get the hard pipe version, maybe that would be best option?

[@sixdaysontherun]

@@mastersmods ive gone back to the oem at the moment and its better might just stick with it :) cheers tho mate

[@mastersmods]

@@sixdaysontherun you can get a hard pipe version but I believe it's about £150

[@NoName-gu9tf]

I need too get my engine similar too yours mine a mess

[@mastersmods]

In what way mate?

[@NoName-gu9tf]

Be easier if I could show u its got a horrible mental dust bin filter and ecu unprotected

[@mastersmods]

@@NoName-gu9tf nothing a bit of engine degreaser can't fix tho ahy bud

[@maddoxgaming8310]

Them Pro hoses are fucking shit, I fitted a set of coolant hoses to a friends ST and I had to cut some of the pipes to make them fit.

[@mastersmods]

Really? No way! I always thought pro hoses were a decent brand of hose

[@maddoxgaming8310]

@@mastersmods That is just from my experience anyway, the 2 long overflow pipes that come out of the coolant bottle I had to cut and sort of re route them. Shapes are all wrong.

[@mastersmods]

@@maddoxgaming8310 that's no good is it! My last car I had to trim a few pipes to make them fit SMH

[@maddoxgaming8310]

@@mastersmods This is why i keep my ST250 standard haha, just got a Mtune induction kit and cat back exhaust.