Installing extra hydraulic function on tractor for a grapple

[@adamsherm29]

Grandfather must love having you around. Making life easy for him at such an old age! Love the videos

[@cj28739]

So nice to see a good Grandson make his Granddad's life a little easier. Nice to see a little of your life, keep it coming. You are a good man.

[@russellfreeburn6284]

Great to see more videos coming out. I really loved see your grandfather in Timelapse. Awesome. You don’t see that often. I love seeing shorter videos coming out quicker and the ones that are 1-2 hours every month or so. I can’t believe your not bigger than you are. Keep being awesome mate

[@cjm6271]

It was fun to see your grandfather! Tell him "Hello" from Naples Florida, USA. I hope he can be featured in more videos in future.

[@M.BJOERNSTROEM]

I did, and he answered with a big smile!.

[@rayhein8205]

Beautiful installation! Like your attention to detail and most importantly, helping your grandfather!

[@AW-Services]

Be careful using heatshrink solder connectors as they are prone to dry joints and corrosion due to the cheap flux and solder compound. Another great Video and you are Hardy working in those temperatures

[@M.BJOERNSTROEM]

I only have good experience with that kind of connectors so far, but guess i will found out. Thanks!

[@antondanielsson137]

Har man inte rätt pressverktyg så är denna skarv att föredra :) sen om man skarvar mycket kabel så har milwaukee en bra varmluftspistol som är batteridriven som är bra för just sådant, även smidig när lås osv har frusit ;)

[@jorgmuller3100]

As always, a pleasure to watch and also something to learn. Thank you very much.

[@BarnStangz]

Came out sweet man! And wow, I give you props for working out in the cold like that, getting things installed. At least you didn't have to fight with wind it looks like. Where I'm from, it's windy almost all the time, today, we have had 60 MPH gusts. It looks like this grapple is going to make things much easier for your Grandfather, and that's a good thing! Hope to see more of the farm when the weather warms up. Take care!

[@M.BJOERNSTROEM]

Thanks, yeah luckily it's not that windy here. You too!

[@thecorbies]

Awww. What a lovely video. Getting that job done for your Grandpa? (Farfar) seems like it made his day. Well done. Regards Mark in the UK

[@bolski-uitlaatstore9130]

Nice, to be able to help your grandfather with this.

[@carv3l97]

Two in a week, what a treat!! The way you did it was very good, simple and easy, but have you considered using the rear hydraulic couplers and add to the joystick a rocker switch? like in the excavator extra lines ? Thank you and greetings from Portugal

[@timkirkpatrick9155]

Nice job! I agree with the old man. I have 5 gas saws and one electric. It is quieter and works well so neighbors don't get upset and I keep my hearing.

[@DIYTechRepairs]

I would have put the switch on the lever itself so you can flip it without moving your hand/arm :) Thats how we have installed those types of extra outlets many times. Basically you get the 3rd function by holding down a momentary switch Good work

[@M.BJOERNSTROEM]

The old man is in no hurry. If it was mine i would of done that. Thanks!

[@Larry-325]

Always enjoy your projects! Great job setting your Grandpa up with the tractor. I bet he likes staying busy. We can see where you get your work ethic from. 👍👍👍👍

[@DuncanAitken]

That closing shot was poetry!

[@chrispy3866]

Valmet makes tractors? Dang! Big fan..

[@user-tb9mg4md7d]

They used to, but not anymore. It was Valmet first, then it became Valtra-Valmet and now its just Valtra. Also the Sisu logo in the front means it has Sisu diesel

[@kpinc8898]

If u put small Button switch on joystick, u can use that very smothely by pressing and moving joystick to grab and leave Button to tilt arm. It would be perfect

[@M.BJOERNSTROEM]

Personally, I would have done that too if it was mine. But the old man was happy with the button, he is in no hurry anywhere

[@kpinc8898]

@@M.BJOERNSTROEM later u can do it, he will be happy because IT will be easier to use even for him

[@patryan3494]

Be careful not to let it in energized position for a long period, it will burn out the solenoid, the push button on the control lever is safer

[@leonvdm]

@@patryan3494 I agree, though burning out takes a lot of time when its that cold :D

[@oldjunkandrandomstuff]

I really dig your work ethics man, good vid as always 👌

[@M.BJOERNSTROEM]

Thank you!

[@harrytaylor6854]

Your granddad will like that well done thank you for the video

[@klaslindstein2252]

You are so competent my handsome Swedish brother. And the winter look so crisp, wish Stockholm weather was as crisp and dry with snow.

[@7810jam]

Another great video👍 There must be great hydraulic flow on that tractor, it seems to operate quite quickly even at idle.

[@annechristiansen941]

Tusen takk for god underholdning 👍🤗👍

[@Theo_005]

Nice Valtra

[@jix177]

Good job - and a happy customer!

[@Peter40942]

great job . super video like all iour videos

[@alasdairhamilton1574]

Expertly done👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@jamesadams893]

Damn you're pretty handy to have around the farm

[@CrowsBrother]

The perfect grandson ! 🙂

[@rekord871]

tusen takk for film:) skal gjøre det samme på min trima 1490 så dette hjalp mye og lære av deg:)

[@M.BJOERNSTROEM]

Takk, flott å høre!

[@rikardfriberg9529]

Älskar ståltråden han hade skruvat fast på sågen för att måtta längden på klamparna. Körde med precis samma koncept när jag bodde hemma och kapade ved åt farsan. Måste kapa stockarna från rätt håll bara. 😆

[@M.BJOERNSTROEM]

Haha ja han råkade kröka den lite där på slutet

[@heighRick]

Thanks for the video, helps a lot!

[@jessevangans2195]

great job

[@matthiku]

Great video and explanations as always! You never let us down. Just a little hint on how to pronounce the word "just" - like "dschasst" 😁😸

[@edelmirorodriguezbarreiro1247]

Good job

[@MegaKnutten]

en till men tack mannen, rena julafton

[@M.BJOERNSTROEM]

Tack, kul att höra!

[@ulwur]

Klurigast i filmen var ju farfars sticka på motorsågen för att få rätt längd på veden!

[@M.BJOERNSTROEM]

Ja han var helt klart nöjd över den. En fastlimmad sockerbit (kopplingslist) som han kunde justera den med.

[@Ghostface0911]

Awesome. Keep them coming.

[@christianhoch2247]

Great Job! 👍👍👍

[@mwk2030]

Du är jäklans duktig! Bra jobbat och en mkt bra kanal

[@misel9411]

Nice work! And a nice Finnish tractor ;)

[@erkki2092]

Valtra on parempi 🇫🇮

[@Joe-mf4jx]

I thought your dad put a block heater on the chainsaw for a second lol

[@classekaka]

Snyggt avslut på videon!

[@M.BJOERNSTROEM]

Tack!

[@wes3428]

Run the cable up the side of the joystick and a switch on the side like a splitter on a shifter

[@matthiku]

And thanks for the great commentary and the improved subtitles! Btw., why don't you treat the temporary red blind plugs like screws and turn them instead of pulling the out? Don't they have a thread? That way you avoid breaking them and loosing some debris into the hydraulic pipes.

[@plisken8799]

Nu blir gubben glad.Vilken elsåg har han

[@rolandios]

Amazing job again !

[@letmelooktv]

Cool video thanks for sharing :)

[@leonvdm]

neat! 👌

[@johnnybuss5637]

Kul, har en princip lika dan traktor fast några snäpp äldre, Valmet 604. Du får gärna göra ett extra fotsteg på vänster sida så din far (och jag 😉) får det lättare att komma in och ur traktorn. Har inte kunnat klura ut hur man ska/kan göra. Vi gamla gubbar blir allt stelare, dock på fel ställe..

[@daithi007]

Like Andrew C. but Nordic

[@stickhillfarm]

excellent, again. help us below the circle understand what its like up there. put air temps, boots you wear, gloves, little info like that in description?

[@quietbrianquiet]

Thanks for the video, you sure do live in a nice place on this world we have. Does Grand Father speak English also? I see you put labels on in English? Thank You.

[@M.BJOERNSTROEM]

Thanks for watching, its a peaceful place. No, he doesn't speak a word in English

[@petergdk]

Tilt and grip are pretty much same words as in English in both Norwegian, Swedish and Danish, so they work fine in Scandinavia :)

[@edelmirorodriguezbarreiro1247]

Goodyear job

[@Boraxo]

I put my switch on the joy stick handle.

[@666timon]

HæHæ har akkurat samme klypa . en god å sterk klype til både tømmer og kvister

[@Jonas.mf399]

Du er sikelig smart ser jeg😊

[@utsports]

Very nice job that you performed,I know why you invested in a Hydraulic Hose/Line Crimper,due to the all of the Hydraulic machinery that you, and your Grandpa own,or possess ,also i assume that you saved a considerable amount of currency ,by doing that yourself, instead of having a shop perform the work,

[@villageearthwright]

How come you use poppet style quick connect and not flat face? I noticed that the volvo and engcon use poppet, I switched mine to flat face though.

[@M.BJOERNSTROEM]

These ISO A connectors cost around 15$ / set, and will work good for the usage of this machine.

[@SPUDHOME]

Neighbors aren to close where he is.

[@johanlarsson456]

Bra filmer . När på året är detta

[@M.BJOERNSTROEM]

Tack, det är filmat i slutet på februari vill jag minnas.

[@joeykerr1384]

What do you listen to while you work?

[@M.BJOERNSTROEM]

The headphones is mostly on silence when filming , but other than that it's usually on radio or spotify

[@jimsvideos7201]

Did you ever work on aircraft?

[@M.BJOERNSTROEM]

i'm no aircraft mechanic

[@frankfletcher8752]

A man's hands tell you all you need to know !

[@larsmark]

First! I just had to!

[@johnvanhal2450]

You must be under 12 years old? 🙄

[@larsmark]

​@@johnvanhal2450 Nope, 41 actually. But I am easily entertained.ö, sometimes by myself.

[@waterislife.9204]

🙏🦾👍