How to replace the piston and head and set the timing on a 150cc go-kart engine. ~-~~-~~~-~~-~ Please watch: "How To Make Your Coleman CT100U Minibike Faster!" • How To Make Your Colem... ~-~~-~~~-~~-~
Пікірлер: 39
@dAmaGedgOoDs666 Жыл бұрын
Finally someone who knows what they are talking about…Thank you for the video…
@markossmith87867 жыл бұрын
This is a great video - thanks for posting. I followed it to rebuild a 150cc Chinese quad that had the same engine - using a new piston and barrel. Hopefully mine will now start/run but unfortunately there is another issue with the starter clutch which needs addressing. Thanks and regards from the UK.
@vladimpaler92742 жыл бұрын
Nice kzbin.info/www/bejne/rJ_Ng4GwbZaAfNU
@90dcp9 жыл бұрын
Thank-you for the time you put into this, it was very helpful!!!
@TheSkoto19 жыл бұрын
Thanks this was a big help. I will use it soon on mine soon as my parts arrive.
@jerrysoriano46428 жыл бұрын
great video very detail and helpful thanks keep it up..
@adamak47miller904 жыл бұрын
Your video helped me thank you
@Illteachuhow2 жыл бұрын
What millimeter kit did you buy for the rebuild?? Please let me know
@Ssbad248 жыл бұрын
Nice! Thanks!
@kevinstearns41986 жыл бұрын
perfectly done video.!!!!!!!!!!!!!!!!!!!
@Daniel-mp6ki3 ай бұрын
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
@snakepearson94332 жыл бұрын
What kinda of lubricant are using for the piston and putting it back together?
@RYoung096 жыл бұрын
Do u need to drain oil first
@Daniel-jw3of5 жыл бұрын
I have a gokart that has a gy6 150cc and I just rebuilt it today but the big hole on the cam is facing Down towards the piston and and it was running good but smoked alot so that's way I rebuilt it. I rebuilt it the same way with CAM HOLE FACING DOWN TOWARDS PISTON. It runs but should I turn the cam around so hole is facing up towards steering wheel?? PLEASE HELP
@mattdwyer94323 жыл бұрын
It can't be 180° 'out', as it sparks on intake and exhaust.
@Daniel-jw3of3 жыл бұрын
@@mattdwyer9432 ya I realized I was wrong...
@mattdwyer94323 жыл бұрын
@@Daniel-jw3of just tryin' to help! It's possible I've worked on mine more than I've ridden it!
@sambou8127 жыл бұрын
what is the differences between gy6 engines i have the carbide 7150 150cc i want to rebuild the top end its in an trail wagon tw200
@atonyrodify6 жыл бұрын
Hey there nice video would you or anyone you know where i could find a left side crankcase for hammerhead 200 w/internal reverse? Thanks and great video really helpful
@CannondaleF7006 жыл бұрын
You put the valve rocker on upsidedown! Ex facing upwards even tho you said put it downwards!
@oldwortex58183 жыл бұрын
Exhaust down and Intake up.
@traviswilbanks4278 Жыл бұрын
WHAT REBUILD KOT SHOULD I BUY FOR THIS ??????
@GoPowerSports Жыл бұрын
Lil Rascal Minibike Kit
@A_Stereotypical_Heretic Жыл бұрын
@@GoPowerSports what is that bolt on the side of the cylinder body for? It's by itself... seems to go nowhere nor hold anything...
@kevinstearns41986 жыл бұрын
the torque is 14lbs for the head the 6mm head bolts are 7lbs. you need a bigger engine in that go cart.
@JTL-DK4 жыл бұрын
Mostly i find them smoking due to cheap crap valve seals.
@kevinstearns41987 жыл бұрын
what did you set the valves at?
@user-neo716656 жыл бұрын
.004
@kevinstearns41986 жыл бұрын
i bought a new 150 motor it doesnt run the valves were bent i put a new head on when i timed it like you did and you turned the flywheel to make sure it was right i did that and the valves were to tight. wtf?????
@kevinstearns41985 жыл бұрын
like everthing else i figured it out.
@claudio673623 жыл бұрын
Best is to set intake at 0.003 and exhaust at 0.004 ..
@flierbill6 жыл бұрын
No link to the Ultimate rebuild kit?
@kevinstearns41985 жыл бұрын
theres plenty of videos on big bore kits on how to do them. it aint shit to do.
@calvinmorris41888 ай бұрын
Why does it cost 2.99 a month just to join this channel wth lol
@GoPowerSports8 ай бұрын
Cuz you love us
@shuanSmith Жыл бұрын
We're do the silver ring go
@dustycard98525 жыл бұрын
I have the carter talon has the gy6 150 motor but mine has the two bolt valve cover an yours is four bolt anyone have leed to where I can find a top end kit