Installing tracks on the 75c challenger

[@solorado]

Another frustrating situation where I desperately want to help but am forced to sit and watch. Kidding, this is one of the few things I can watch that helps keep me grounded in real. Thanks for taking the time to share with us Warren.

[@rickboehm7970]

Sir, your are truly an impressive individual. I normally do read comments but I did so on this video. I believe 100% of the comments were all righten with the same reaction....that is you are a remarkable talented individual. It is amazing what you as a individual are capable of accomplishing. If this country had 1/2 your work ethic and drive would not have any problems. I had the utmost respect and admiration for you. I am unable to express how you impress me on all you videos.....thank-you for you unselfish teaching and guidance Respectfully, Rick

[@sudd2685]

That’s the cleanest that machine has been since new, thank you Warren.

[@mpstenz3520]

You accomplish so many tough tasks as a 1 man show. Man, machine and leverage. Fun and learn..... I don’t get dirty though.

[@gordonkraich3129]

Warren it is just amazing to watch you tackle any heavy job by yourself and always figure out how to make it work. Fun to watch.

[@johnfuqua1143]

Had to be a pain in the butt to carry us along with you during this difficult repair , thank you I was on the edge of my seat wanting to help drive that pin home

[@kennethpensyl7791]

It astonishes me the things you do by yourself. Awesome videos.

[@gordondewald8267]

Mechanic, forklift operator, all round mechanical magician.

[@jamessmith7691]

As long as your tools don't fail seems like you always get it done. Good video.

[@thomasstewart9368]

A guy sure earns his money working on the big & heavy stuff by yourself. You're the man 👍

[@atinder22]

Warren you're a one man army keep up the hard work brother!

[@generobben7290]

Super job Warren. You amaze me with your ability to accomplish huge tasks like this.

[@conantdog]

One man and a whole lot of steel, amazing what you can do two hands and a good head. 👍You the man Warren 👌

[@Only-one-life-68]

Within 10 minutes I was sitting there with a cuppa tea,wanting to get my work clobber on and help him out .. Some Fitters wouldn’t want to do it with a team outside in the RAIN. If I lived near this guy I’d help him. Though I’m a few miles away 😕 🇬🇧

[@ianleonard2829]

Warren great content as in all you're videos thanks for taking the time to make and post your videos there great much appreciated

[@edgonzalez1871]

Thank you for the videos Mr Warren..

[@westerntruckandtractorrepa1353]

Your welcome

[@jonathanhageman150]

Awesome job. That is some good skill with a fork lift. And that dang Durango always in the way. Lol. The lugs on those tracks are way bigger than I thought they would be. Just awesome job 😀

[@ernestdougherty3162]

Great job Warren we appreciate what you do and appreciate watching you and thank you for sharing it with us God bless you and your family God bless the United States of America and thank you for your service to our great country

[@jimmymcleod5953]

It wears me out to watch you because I always want to be there to help!

[@murraymaclean7731]

Great work and another great vid .. after I saw you take them off .. I googled to see how others put them on... and was pleased to see this you just posted the vid !! I run a fleet of diggers and work alone too on the maintenance side, and am pleased to watch how you get around the challenges and get things done by yourself, its a real challenge! and requires a lot of lateral thinking . Well done fella and keep posting your work, although I know even the video editing is a task in its self, but what you put up is informative , helpful and spot on true to life !!! Thanks,.. regards Muz

[@dieseldudeky894]

Saying hello! From Kentucky and great job, thanks for taking the time to make the videos

[@Bodhranarama]

Really admire your patience when you're jockeying some of those big assemblies together on your own.

[@angelchamp303]

Working in the snow. You are an animal. Your videos are awesome 👏

[@michaelmcdonald6727]

Hell of a job there Warren. A lesser man couldn’t have got that done!! Thanks much for sharing man!

[@davewhittington1368]

A good job done on your own !!! 👏👏👏👏👏. Thanks for sharing. Stay safe and healthy 🇬🇧

[@olspanner]

For a one man show you are an impressive worker Warren. Stay safe mate. Some wooden blocks bolted to the end of those fork lift tines would possibly assist. But wtheck would I know?! You know what you're doing! I am thankful for the time you put into these videos to keep old folks like me sane [ hopefully - lol ]

[@philglover2973]

Well done Warren thanks for your time Top job 👍🇺🇸😷

[@paulmcdonnell9409]

Love watch you working Warren keep up the great vids

[@wesreeder6721]

Heck Warren. Setting a track on the challenger don't look like an easy job. But heck. your getting it done as always.Good job .

[@trevormansfield6740]

Excellent video Warren. I had no idea how that was done. What a bastard job.

[@rodneymiddleton9624]

Lots of hard work for 1 man but you have figured out how to Get-R-Dun!!!!!! Thanks for the video.

[@breikowski]

I’m just rolling my eyes. “Andrew changes tracks in a day” on a mini excavator!

[@dereckjtbear2175]

That is one weak attempt at humour.

[@davidcraven277]

Warren you just got to love working on the ground I feel for you

[@stevefirst9521]

Amazing how you do this and do it alone Warren. I probably dont need to tell you, but be careful. LegArms over at the KZbin Welker Farms had a drawbar fall off a jack and almost severed his arm. He broke it in a couple of places and only a chain saved it from amputation. He was working alone and was in a really bad spot. Thanks for another great video.

[@750VFR]

Well done Warren, all that hard work, then to the video editing suite for more hours. Appreciate the hard work. 🇬🇧😂

[@dont9098]

Excellent Job Warren, Thanks Mate

[@raycollington4310]

I'm speechless sir, no treading water at this day in the office!

[@Firemandave911]

Wish I had half the energy to get stuff done that Warren has!!

[@B.E.Long.63]

Warren I'll give it to ya, hats off man the things you do all by yourself.. Take care and be safe.. Also I don't know what you charge but it aint enough...

[@Danbark601]

I like the chest mount camera view. Good work Warren.

[@sudd2685]

Thank you for your videos

[@mfc4591]

Yes, I am biased because I fitted steel tracks and never rubber and I worked on forklifts for a long time, but those tracks are a pain to fit, however, I am certain most satisfying in the end. Forklifts are very handy to have around.

[@plumbcrazy375]

I'm very impressed by you doing those tracks by yourself

[@davidgrass3719]

What can you say, there's nothing he can't fix .. Nice job Warren, See Ya

[@rorianis]

Warren is the Master of Fabricobble.

[@MW-rk7nl]

i like how this video starts...the zen master at work, great content as always! thanks for letting us watch over the master's shoulder

[@michaelclutton8446]

Great job, amazing doing that without help

[@anrew1000]

Just starting the video! Was getting worried about you! Hope you and family are well.

[@kerrylee8464]

Warren you are an animal doing all that w/o help. Great job!!

[@Jasonhb07]

Often times help will create more work..

[@tomjohntig]

Great job Warren thanks for the lesson 🇬🇧🇬🇧👍

[@BubbaAyers1969]

Wow Warren you the man, great video thx, felt like I was there with you but you couldn’t hear me 😃

[@hankwhite2038]

“HELP “ WOULD JUST BE GETTING IN HIS WAY !! 😎🤙🏻🤙🏻

[@PapaJ5667]

Wish i lived closer ...id love to work with you .......never too old to learn more

[@nickmeier9356]

Excellent Warren! Warmest regards from sunny DOWN UNDER

[@heavymachinery2843]

Warren the man for the heavy jobs 👍👍

[@bryansimon4072]

Tough one but you got it. Nicely done and thanks for the video

[@SomeGuyInSandy]

Wow, what a fight! Nice work as usual!

[@johnmccaughan4195]

Damn sure earned your money on that job. Nothing but a pain in the ass.

[@fordnut4914]

This guy is a hard worker and I notice alot of people commend him on it . but their are guys like this all over our country they just choose to not televise what they do . Some don't want the notoriety some just ain't got time to set up cameras go threw all the editing bullshit. Some just basically stay low profile.

[@tommyholcroft5838]

Awesome job. I’m impressed with how much you get accomplished working by yourself. I noticed your load line on your crane has a clamp attaching it to the tail. I know it works but research attaching cable to wedge hook. It’s pretty simple and safer. Anyways great video. Can’t wait for the next one.

[@marknewell7355]

Where is that young lad that was helping you gone warren I see you working like that I wish I had a teleport button to come and help you out not saying you need it just way I am lol another awesome job done

[@daviddamico4288]

Amazing how you can do that alone

[@kennethconnors5316]

amazing what 1 man can do!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@johnwaby4321]

Nice job . A bit tricky 👍👍

[@dondiego2262]

All that new rubber looks good . I know what a PITA that job is .

[@blacksmoke5009]

Thanks for sharing bud nice job !👍

[@pootthatbak2578]

I wonder if some sections of 8inch or 10 inch heavy steel pipe about 16 inches long would help you ROLL that next long heavy axle under something. Lift the axle on top of of two pipe sections and roll it back under the tractor

[@garysoykin2783]

Thank you werrn I was wondering how you did that that’s cool

[@bryansimon4072]

Nice how you think a job through, it works

[@jamesm9766]

It should dig in and pull now by god good job buddy

[@TheSagerider]

I have been waiting for this! Thanks!

[@pootthatbak2578]

Warren takes vacation, comes back 2 weeks later, the dogs fixed everything in the shop. Them dogs know how to do this job..they just need thumbs to hold the wrenches

[@steveholton4130]

Just call PETCO and order up several "Thumb" retrofits!

[@hemihead6645]

A set of dollies would come in handy right now.

[@michaelweatherhead9470]

Good job Warren.

[@gregbird6615]

How you been ? Good seeing another good video

[@imtimrich]

Great job, lot of hard work 😓

[@DieselRamcharger]

Hardest working dude ive ever seen.

[@jardiff5983]

I rode an m1a1 abrams tank back in my army days. A crane and or a forklift would have sure been nice for replacing the tracks. And hydraulic track tension too? You have all the comforts.

[@Tafs315]

I've got a question for you. I have (3) 7.3 IDI Ford diesel motors. I notice on one of your old videos that a John deer motor injector has a copper washer that place on the injector. My 7.3 has the same setup. Is this common on all manufacturers injectors. Thanks keep up the great work I learn a lot from your work

[@alanstanley9465]

How you do all that on your own , well done mate.

[@gcflower99]

Great video, Warren! Would a couple of those car moving dollies work to slide that axle under (the kind that go under the car tires to move it around)? Probably not enough load capacity...you might have to build 'em!

[@neiltheplayer]

I know you will be done when i watch this but vehicle dollies with blocking on them would work very well. they'll support a vehicle so this axle would be a piece of cake

[@Bryanja81]

When are you going to start posting your videos on Rumble? Get paid what your worth! Your knowledge is invaluable and we surely appreciate all you teach us. Take care.

[@terryglasbrenner2078]

I used my trans Jack a rolled her right into place raised her and popped in the pin easy peasie!

[@westerntruckandtractorrepa1353]

Doesn't matter what I do there's somebody always measuring peckers.

[@festus512]

@@westerntruckandtractorrepa1353 Ha Ha that's the way it goes

[@memecentral2460]

repair lmfao

[@merlepatterson]

Too bad you didn't have some car casters to help position that axle? I saw a guy make his own adjustable pipe cradle. He got heavy gauge pipe and another smaller heavy gauge pipe that fit inside the bigger one and welded eyelets on each end and a series of holes down the length with a bolt to hold the extension length. Then he could cradle things with the crane at various widths. Seemed to work well.

[@austingoleman9431]

Man you need a swamper or a boy that needs to learn a trade but you got it done

[@MC-re2ry]

There it is folks. When the going gets tough, the tough get going. Thanks Warren.

[@ko9446]

A few links away from the fork fitting under the fender. I watch this and think, someone else has the same luck I have.

[@Zak6959]

35:50, it’s “WHOA” season

[@walterwhitaker1395]

Great job Warren! Hey guys how many times did you say to yourself WARREN GET THE OLD LADIES CAR OUT OF THE WAY OF BUSINESS LOL!

[@timheasley612]

Any one want a Durango lol 😂,, that will be a big hell no there junk 🤮. Great video keep healthy my friend 🙏🏃🏃🏃

[@jimmahoney788]

Couple of pallet jacks, one on each side and roll it right on in?

[@leeharris3061]

Those tracks should 'chew' like rosie O'Donnell at a all you can eat buffet!!.. 😁

[@ROTTK9]

the last start up shows 2 things the machine does not like cold and a small exhaust leak. another job complete

[@razorramoang5947]

maybe make some small dollies from steel plate and put some swivel casters on them and keep them on the truck for the next time you have to move an axel into place . Or maybe Princess auto sells them .

[@mongomay1]

might half to go a size bigger for outer orange glove in winter time.

[@mikeznel6048]

You're the man Warren! Seems everybody knows better than you yet here you are actually doing it!!! Hey Warren you need to buy dollies. Hey warren, you need to make a cradle. Hey Warren, you need to buy this. Hey Warren, you need to buy that. Hey Warren, if you but the entire world itll be easier. Hey Warren. Hey Warren. Hey Warren. Hey Warren. HEY, WARREN!!! BUY THAT! It never gets old seeing everybody else's 2 cents. I know some of the people only have the best intentions when they say that kind of stuff but still... Most of them are just better than everybody else so their ideas are the only way to do it lol. Thats what I like about you, you just do it. Thats how you make money.

[@joestreiff9401]

is that the turbo making that "tinging" noise?

[@garysoykin2783]

How would of you put those tracks on if you didn’t have a forklift??

[@westerntruckandtractorrepa1353]

I have used my crane numerous times in the field. Back hoe works too.

[@DRNelson-ll3ov]

Do you remember how many hours were on that machine? Just wondering if changing those bearings in the axle and those tensioners is a usual thing to do when the tracks are changed or if that machine was unusually worn...?

[@KPearce57]

There is more way to skin a Challenger, Warren for the win.