Interior Complete on the Pro Touring LS3 69 Camaro!

[@nathanthompson9368]

Bro you did such a killer job on this. Thanks for continuing to put out dope content for us to watch.

[@jesusleal1496]

Freaking awesome bro! Seeing the light at the end of the tunnel…

[@SuperOperator4]

Now my back hurts just from watching that. Nice work!

[@redlineeddie]

The attention to detail 🤌

[@jsmith1210]

Sir I really enjoy your channel as it's very informative and fun to watch

[@ohpigzz6029]

I love it man!!!! I’m a ford guy myself that has a project truck I’m doing but I don’t care that it’s a Chevy he is doing everything absolutely perfect never skips on anything keep up the hard work can’t wait to see how the dash goes together

[@AJYZF1R2010]

I absolutely love this build fantastic work

[@captain54526]

Man, you have the skills and talent. To say I am impressed is an understatement !

[@_s-lp7ng]

how do you not have 100k+ subscribers? awesome content bro. been watching since you got it.

[@charlesmcdonald3224]

Really love this LS3 ‘69 Camaro! It’s a suitable beast.

[@ArthurDayneFirstOfHisName]

Custom Console By Chris 💪🏾 Great vid bro !

[@SD70ACE-]

You're very talented... Nicely done, Sir

[@MackMaloney23]

Looks unreal!! Awesome work, cant wait to see the finished product!

[@joncpeters]

Excellent work! I was skeptical of the console in the beginning. I am using these videos as a road map for my build

[@musclecarsdaily3020]

im building mine to a pro touring also but i cant afford the ls3 so im doing 383 stroker

[@sethmargadonna502]

Looks amazing! Interior is sick!

[@michaelclark1036]

Great work Chris.

[@kmb96]

I didn’t notice I wasn’t subbed until this video but I really enjoy watching all your builds man, from the budget V to the C6 but especially this ‘69! Made sure I’m subbed now

[@01Snorky]

Niceeeeee job with the console!

[@swift__]

Tons of progress, Camaro is looking killer 🤜🏻🤛🏻🤘🏻

[@speedstreet2573]

Love the Seats they look perfect nice job

[@westonlennen]

Thing looks sweet man. Good job!👍

[@cliffjamerson3107]

Great job Chris I’m working on my camaro

[@cooterbrown7681]

Man I can't wait to start on mine

[@Oneil4205]

it's the same console as the goonzquad guys 🤘🏻💪🏻 That’s awesome

[@johnnygandy3931]

Absolutely enjoying your channel. Great show chap!

[@Qharisma]

Ths man had Young Dolph on the tunes ... I knew I liked you .....

[@waynemalcolm7381]

Great job brother!

[@ChrisSullivan69]

I appreciate it!

[@jonnyc71]

looks great. need to get a dimmer switch grommet for your carpet.

[@4Memf2dafizzo]

Looking good brother!

[@boosted_red8294]

Great channel, great content , hoping he continues to grow. Nice job!

[@aj_412]

Awesome man looks so sweet! Honestly took me a while to get into this build as I found your channel through da ctsv build but I’m on board now!

[@ChrisSullivan69]

Thanks man 🤙

[@brianpongones7574]

That's one Killer Camaro.

[@andrewemond3904]

Awesome job you do first grade work keep em coming

[@jorgejefferson8251]

Nice job on the center console, but I would've pulled that boot down a few inches and let more of that beautiful billet shift stalk showing. I think it would really pop with all the black in the interior.

[@Wesley-sf8jj]

Great work as usual

[@robandrade3424]

Awesome video never a bad one bros a beast

[@brian2359]

Next time you fiberglass, use that Reynolds’s nonstick aluminum foil! Works fantastic

[@ChrisSullivan69]

Good idea man!

[@pimpjuice811]

I really do envy you bruh. If I could do half the shit you've done with your cars I'd be further ahead with my project car ....🤞maybe one day! Keep up the great work and videos!

[@ssoffshore5111]

Chris, looks great! While the belts are a big improvement over the lap belts, I would highly suggest getting a harness bar as that shoulder harness angle is far from ideal from a safety perspective. Great job otherwise!

[@TheTruckDoesntRun]

Absolutely Chris, please take SS OFFSHORE's advice here. With those shoulder harnesses being anchored to the floor, in a significant impact event, both the driver and co-pilot will very likely suffer from severe spinal compression if not a broken back. Weld-in and install a harness bar that has those shoulder belt attachment points being equal to or slightly above the drivers shoulders.

[@falcon_blasphemy]

But would this be a safer solution than just running a lap belt? I don't have a B pillar in my car, so a harness bar would be difficult to install.

[@drifter2090]

Amazing job man!!

[@OhYeahAboutThat]

Looks great! Try some SEM Trim Black on that console if you're unhappy with the current finish.

[@amp7876]

Might want to check into the time for the GPS to get a position before your speedo will work. This could cause a delay in activating your Reverse lockout solenoid. I think it can take up to 4 minutes if not a "hot start" which in turn would keep your lockout from working. I am looking for solutions as well for mine. I think I will be using the Bowler 3 in one harness and run the square wave signal of the VSS to the pins on the B4 connector(pins 14 &18 i think) Holley sells this plug by itself if you bought the system without trans control like I did. The only bad thing is it will use up one of my limit of 4 i/o on the terminator max kit. Of course I am just studying this so i could be completely wrong. Just wanted to give you a heads up in case you run into issues.

[@ChrisSullivan69]

Good to know. I'll keep it in mind.

[@tdz8]

Looking SICK bro!! 🤙

[@MrFlabbybeast]

Looks great! Awesome job 🎃

[@matthewburkholder1076]

Love the camaro, wish is was a 67 or 68, but still badass👍

[@christophercastro3302]

Sweet

[@damiangarcia5273]

Beautiful

[@venomws6]

Beautiful work man 😎

[@russthomasjr]

I wonder if the LSA supercharger would be a good addition to this project? Supposedly they bolt straight on to the LS3

[@MrFitbikeco10]

Nice editing skills. Really makes it exciting to watch. What platform you use to edit?

[@ChrisSullivan69]

Thanks! I use Davinci Resolve.

[@patriceboucher5582]

👍… for the Corbeau seats , do you buy a new seats brackets?? Or a new

[@fredeb67]

Those seats would be nice in a C5 or C6 Corvette.

[@devinswanson1752]

Very nice job..Can you please tell me where you got your front seats and who makes them? I would like to change my front seats and rear bench seats in my Jeep Trackhawk to 4 bucket seats just like these. Thank you very much.

[@ChrisSullivan69]

Those are corbeau RDX seats

[@queezytarantino1456]

Super clean build, what is the center console from?

[@keithcarlascio8970]

Hi Chris.. question on your seats. I have the same ones in my LS swapped 80 TA but the drivers side seat back does not come forward enough. The passenger is fine. Wondering if u had any issues. Corbeau is sending a new reclining mechanism so hoping that fixes it. Beautiful 69. You do great work!!

[@ChrisSullivan69]

Hmm, I haven't had any issues

[@blackcloud77]

I like the simplicity and utility of that center console, you don't happen to know what it is/where it's from, do you?

[@ChrisSullivan69]

I believe its from a place called "modern classics". They make a few variations of it

[@johnnygandy3931]

Have you thought about painting the shift knob?

[@FREDSTATE]

Very nice! Did you ever think about using the center console from the donor Camaro in this?

[@weldonhawks2093]

I really like that fiberglass console. Do you know what brand it is or where I can find one?

[@milesm978]

I don’t understand how you can anchor the harnesses off the rear seats. Does it not change the fastening geometry

[@OSCARCAPETILLO07]

Hey Chris had a question where did you get that center console love it . Or what car did it come from would really appreciate it thanks

[@ChrisSullivan69]

Came in the car. I beleive it is from a company called Modern Classics

[@OSCARCAPETILLO07]

@@ChrisSullivan69 thanks I’ll look into it

[@dmndkngs21]

Do you answer questions regarding the build. I have a few

[@_SlickRickSS]

Dang…. Legit ness😎🤙🏼

[@mikes7405]

looks great! Just ordered one of those center consoles. What did you do about the can bus connector for the Holley? I might just leave it hanging out, try to make a mount for it on the side, want access

[@charlierobertson9165]

Where did you order the console from?

[@dmndkngs21]

That's what I'm wondering

[@petercarey6883]

Are the Corbeau seats adjustable?

[@mrgrind74]

Great job... how much were seats?

[@ChrisSullivan69]

$800ish if i recally correctly

[@AntonyBigham]

What seats did you use please?

[@zaccabral4572]

Hey chris i also have 69 camaro im building found your chanel by accident but glad i did great content. I have a question for you where did you buy the custom consol from?

[@jimbrown6913]

Great job , looks killer just wondering if you could tell me who makes the console? Would love one in my a body. Appreciate any help

[@thatboypablo2246]

Fuck yeah 🤘🏼

[@EdA-bz3bu]

I get ssssssssso tiered watching you work will I sit on my couch 😂. I would have figured you out for a gated shifter instead of a boot. Ps when are you going to install a ductless mini split for AC for the garage so I don’t have to hear your young ass complain about being to hot in the summer time (as you are working your ass off) you can get heat out of them too. ✌️ By the way excellent work. I bet your parents are proud. 🎉