Introducing Retro Active Arcade's School of Arcade Building

[@tonkaaaaa]

This is some great information, thanks for uploading this introduction to KZbin. I'm going to for sure sign up and purchase all of the how to videos in the near future.

[@martinward6422]

thanks bro 💪

[@marianoen3158]

don't buy the course , there is some information, a lot of useless stuff , doesn't give you the pdf and after all that even the plan is for 1/2 cabinet, nobody cares about those, your paying to do the real thing, its ok to do the training with the smaller one but give the real stuff after. And there is no measurements on the plan. Don't pay 40$ for that. there is tones of videos showing you how to do 1/2 cabinets and small cabinets.

[@RetroactivearcadeCa]

Technically the plans have measurements embedded within the .dxf file. If you can open this file there should be measuring tools within the program you are using that tells you the length of each line. (Autocad or Ai for eg.) These lessons are designed for you to create your own machine, or scale these files to your needs. We are showing you the techniques to build your own design as described it the first few videos. If you want to use these files you are welcome to but we encourage your design your own or modify these ones. As for the half size machines it is easer to show on video at half scale rather than full scale for scope of view, this is why we decided on this. If you want full scale machine plans then all you need to do is increase the file to 200% and it will be an exact size of a standard machine. The techniques are the same no matter what the scale of the cabinet is. The PDF files are just short descriptions of the tools needed for each lesson and some links to the tools and materials we use if you need to buy them. There should be PDF files downloadable on the left side of the modules that have files associated with them. If signed up to get plans for an arcade machine, that is not the point of the lessons and all of our advertising describes this.