Introduction Dynamic Simulation [Part 4] CATIA 3DExperience R21x

[@expertpkr4077]

Thanks for the video and continuation of dynamic simulation

[@MaximeChagnot]

Thank you for your comment TEK P7 :)

[@sugarsweet9756]

hi plm techology. I have some questions. I know that the function of fitting, which disassembles and reassembles parts, is only available in delmia in 3d experience. Is there any similar function in 3d experience? If there is a way to do this, can you show it in a simple video?

[@mtvince2065]

Bonjour Maxime, J'aimerais utiliser 3dx pour vérifier un calcul cinématique relativement simple. J'ai besoin pour ça d'intégrer un couple constant, et de contrôler l'effort en sortie de mécanisme. Je n'arrive pas à ajouter un couple moteur constant entre deux pièces en liaison pivot.

[@Marcel-ji5nq]

thanks very much for the videos, they have been very helpful at cover some of the gaps that DSS training does not cover at the moment. For example, I have a couple question that perhaps you could address: 1. Can we define torsional springs using the dynamics simulation tools? 2. Can I add friction to the mechanism joints, for example, can I add friction to a revolute joint?

[@MaximeChagnot]

Hello Marcel, Thank you for your kind comments :) To answer you: 1. It is only axial spring for the moment as I can see it. 2. You CANNOT add friction to an engineering connection, a revolute joint for instance. As they are used for kinematic normally. But I believe that you can create a revolute between A and B and then create a contact with friction between A and B. It could work, but I have not tried it myself, so I do not know how the result will be. Maxime at PLM Technology

[@Marcel-ji5nq]

@@MaximeChagnot thanks very much for the feedback, I was hoping that two capabilities of adding friction on the joint and torsional springs will be available by now. I look forward when that takes place, in the meantime I will continue to use other software those type of simulation done.

[@MaximeChagnot]

Yes I agree Marcel, I wished it could be available as well! Thank you for your comment :)

[@paulhochon71]

Très bien avec en plus un débogage en live ! Cool !

[@MaximeChagnot]

Merci Paul Hochon, le débogage n'était pas prévu ;) mais tant mieux que ça ce soit passé comme ça. On comprend davantage le paramètre de pénétration.

[@designerpatel1657]

How can I done flour mill simulation?

[@MaximeChagnot]

Hi Jigar, you can not do such a simuliation with CATIA 3DExperience but you can do it with SIMULIA 3DExperience. Here is the KZbin Channel for Simulia: kzbin.info

[@designerpatel1657]

Can I done that or not?

[@MaximeChagnot]

Hi Jigar, please have a look at Simulia Channel: kzbin.info

[@designerpatel1657]

Please make a video for flour mill simulation

[@MaximeChagnot]

Hi Jigar, we apologize but we will not make a flour mill simulation, because we do not have customer having a need for this.

[@designerpatel1657]

@@MaximeChagnot it's okay

[@designerpatel1657]

@@MaximeChagnot can we simulate any cutting operation or breaking operation?

[@designerpatel1657]

@@MaximeChagnot like cutting by knife type object?

[@designerpatel1657]

Hey Brother I want to make simulation of flour mill

[@MaximeChagnot]

Hi Jigar, please have a look at Simulia Channel: kzbin.info