Introduction to Disc Cutters

Purchase here www.fdjtool.co...
Disc cutters are easy-to-use tools that allow you to punch out various sizes of round discs from soft metals such as copper, brass, silver, gold and more. Disc cutters can save you time and are fun to use. We at FDJtool.com want to show you that you just need a nice, heavy brass mallet and a sturdy, flat spot to put your cutter to make the discs you need for your project.

[@ScoutCrafter]

Outstanding presentation Scott!!!

[@FDJtool]

Great question. The main disc cutter in the video is the PEPE Tools 1/2" to 1" disc cutter. It is stock number #25.195 on our web site. As far as cutting through bottle caps, you should have no problem.

[@maxbeltranvalle1695]

Cool, amazing video!

[@FDJtool]

You can use a disc cutter to punch holes in coins since most coins are made of soft metals or alloys. You do have to be aware that the thickness of the coin does not exceed the maximum thickness the disc cutter can handle. For instance a penny is about 1.5mm thick which in close if not over that maximum of some cutters.

[@musiccomida]

Thank you for posting. What brand name of disk cutter do you have for the one with adjustment pin in the middle. I'd like to know where I can find that. I looked on Amazon but couldn't find that particular one. Do you know if this tool will cut a flattened beer bottle cap?

[@magpiecreative]

Thanks for posting... I have a PEPE tool - might you know how I go about getting the punches sharpened? Thanks again. m

[@FDJtool]

To sharpen the cutting dies correctly, you would have to find a machinist with special grinders to bring back the cutting edge. It might be cheaper to purchase replacement cutting dies which we have available from PEPE.

[@FDJtool]

It appears to be some extra footage maybe?

[@sthwestb]

IS it true these disk cutters can cut through coins without ruining the cutter??

[@XiIIusionzX]

wtf at the end