iPad Pro A1701 A1709 Screen Replacement - Start to Finish

This video is step by step on how to replacement broken LCD screen or digitizer screen for iPad Pro 10.5"
This iPad Pro 10.5 model is:
A1701
A1709
Where can I buy the replacement screen ?
Amazon:
- amzn.to/399wwtN
- amzn.to/3lPFfXp
- amzn.to/3sxhaXG
- amzn.to/2P7nt63
- amzn.to/3rkOwIf
Ebay:
- ebay.to/3w5GTJl
- ebay.to/3tRauE7
- ebay.to/2P3wflv
- ebay.to/2P2xbGE
- ebay.to/3tLx1SO
Pry Tool:
amzn.to/2Vd5gmH​ / amzn.to/3dm7uYg​
Adhesive Red Tape:
amzn.to/38WmHz8
Heat Gun:
amzn.to/2yC5SuB​
Screwdriver Kit:
amzn.to/39doC0F​
-----------------------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4​
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz​
Follow us on Facebook:
/ ubergeekshaw...​
Follow us on Instagram:
/ ​
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely.

[@impulsesystems]

Thanks for the great video. I just replaced an iPad Pro screen using your instructions. I lost the screws that hold the plate over the 4 cable connections between the screen and base. I fixed the plate in place with tape. The screws are way too small for my eyes! I cleaned the edges of the base with ethanol and Q tips. The old adhesive did not come away all at once. There was some sticky mess left behind.

[@apaulabona]

Adorei o vídeo, bem explicativo.

[@ElectronicReplacement]

Hi a tape you using, it’s 2mm. Or 3mm. ?

[@reinsport4898]

Hi what are the name of all your equipment and the glue and the double sided tape.. thank you

[@therickyou]

My iPad a1701’s back housing is bended. Since A1701’s and A1709’s back housing are same size. can I move A1701’s motherboard into a1709’s back housing?

[@mrcmusic1]

Very good

[@ericcharlton311]

To really repair that iPad, the “Impeach 45” sticker needs to be peeled off of the back of case lol 😂

[@turnloosecollective]

You can just close the open space in the 5 to make it 46. Problem solved!

[@leonardo-mg1uc]

Does the replacement screen comes with original 120hz refresh rate Or 60hz coz a1701 has 120 hz screen

[@UbergeeksBiz]

Check the seller description

[@techologysolutions5095]

the link to the adhesive red tape doesnt work. do you have an updated link?

[@UbergeeksBiz]

Try this: amzn.to/38WmHz8

[@gjorg1024]

Why don’t you show or mention the most important part of the repair ? DISCONNECT THE BATTERY !!!

[@moazadi8973]

Hi! I replaced my iPad Pro 11” M1 screen with a gen2 glass screen-Apple Pencil now works very oddly. Lots of dead spots as I draw lines or anything. Finger works fine. Pencil has that issue. Gen 2 screen blocked the autobright sensor on the M1 Gen 3 version. Wasn’t a deal breaker for me. But the pencil not working properly is killing me atm. Any idea why that’s happening? Sometimes the pencil will kick in and work perfectly, but just for a few minutes before going nuts again! !!

[@UbergeeksBiz]

Defective new screen.

[@moazadi8973]

@@UbergeeksBiz really?? Is that common? The repair guy tells me to replace my digitizer, but that shouldn’t be the issue 😥

[@danob653]

Did you ever get a fix for your issue?

[@moazadi8973]

@@danob653 I was advised by the repair tech to wait til digitizers become cheaper...which they now have! Around 60-70 canadian dollars. I'm supposed to call him so he gets one in, then........we will see if the issue was the digitizer lol. I just don't see how the new glass (even though its previous gen) would mess up functionality with the apple pencil. Digitizer must have gotten slightly damaged after we broke the screen originally. Will update you when it is....'fixed' lol.

[@moazadi8973]

@@UbergeeksBiz is that a for sure, or a possible reason? Do you think it's possible that when we broke the screen that the digitizer might have also suffered from the impact?

[@sahajsharma1301]

Is it possible to just replace the glass?

[@UbergeeksBiz]

Yes

[@eevhanantenorcruz4272]

Hi. Did you get the 2mm tape?

[@UbergeeksBiz]

Yes I did

[@chuazhenlun]

the tape is it 2mm or 1mm?

[@UbergeeksBiz]

2mm

[@chuazhenlun]

@@UbergeeksBiz thank you

[@dividethehorizon]

Mafk needs a heat matt

[@UbergeeksBiz]

or heat gun or hair dryer

[@chancesareshewears]

I must be missing something..the new screen comes with a home button.. surely just take the display off and replace with a new one..hmmn?

[@serpent213]

The buttons are bound cryptographically to the main board; you won’t be able to use the touch ID feature, it will just work as regular button.

[@stephenmaina2074]

that is one shitty job its unbelievable

[@christophehentsch1]

Merci !

[@UbergeeksBiz]

Thank you 🙏

[@MagnumOpusSRT]

Thumbs down for sticker on back

[@UbergeeksBiz]

?