iPhone 13 Pro Max Screen Screen Repair Glass Only!

[@RawanAbuSalman]

Hi, thanks for the vid! What's the reason we should remove the ambient sensor? Why can we not proceed without first removing the front modules? Thanks!

[@Dariddda]

With the 12 and 13 series I find it easier to keep the frame, and try to carefully tuck a really thin plastic sheet between the glass and the display, and separate it with a wire using the guidence of the plastic sheet. Granted, it works better (obviously) on a not so damaged glass, but it's doable. That way you save 2 additional steps like separating the frame, and reapplying a new 1. And you can laminate it on a double foam plate. Perfect results every time.

[@screensrefurbished]

What lamination settings do use for in-frame laminating ?

[@Dariddda]

@@screensrefurbished 45c°temp, 25psi, 30sec vacuum, 45sec lamination.

[@screensrefurbished]

@@Dariddda Thanks for that, do you use different settings for different screens? I had good results with those settings on 13 pro max but not the 14 pro max. Would you mind dropping me your WhatsApp number?

[@alejandrorochinvaldez3406]

When laminating, do you use some type of glue in the frame, or just the oca?

[@Dariddda]

@@alejandrorochinvaldez3406 no glue, just OCA.

[@yashsharma-cv8sg]

Iphone 11 touch glass break but display and touch good working How much money change touch glass

[@idftsman8498]

why use captron tape for glass?

[@alexanderraus8741]

hi which oca do you take? unfortunately I have blisters more often

[@diamondcrown6986]

How much it cost to replace?

[@matthewJamesKendell]

Why did you not keep the frame on when cutting the OLED? Is it because of the large number of cracks?

[@MrPhoneDoctor]

If you want a clean job every time frame must come off always. No shortcuts

[@icam3]

Insane. You’ve earned a sub ma boi

[@rohalhanbali8305]

What to do when there’s one bubble left in the middle that won’t go away after de bubbling?

[@Safesaxjosh]

Is the digitizer part of the front glass?

[@MrPhoneDoctor]

Its not

[@vahidramezani4379]

What type of frame glue solvent is it? What is frame glue?

[@MrPhoneDoctor]

Iso 99 cold press glue

[@CharlJacobs-ct9ed]

Hi, great video! How long do you leave the cold press glue to cure in the mold for?

[@MrPhoneDoctor]

About 1 hour. See below for more assistance TECHNICIAN SUPPORT: Please submit your questions on our discord channel linked below. discord.com/invite/QnzbN5sQYQ

[@Roysgigs]

I've got a lcd but has 2 lines down it. I got it on eBay as that but wondering if that could be repaired when taking off my one on my phone I accidentally broke the ribbon so I went for one faulty on eBay without that but still has 2 lines on

[@waynetaylor2784]

I'm guessing like every other mold u need a separate clamp mold for every iPhone model?

[@VegaSpydr]

yes

[@theimike4360]

Do you do training ? As I’m looking to expand my store :)

[@MrPhoneDoctor]

Hello yes we do training. You can email [e-mail] for all training inquiries.

[@Bestjcell]

Hey Crack What up, You know I just other way because I gotta a lot of screen for repair , but I has been learning from you , Just I dont take off the frame , I keep the frame and I just remove the glass and with this way it's work .

[@karanbirsingh4006]

Sometimes I ends up cutting the polarizer with the wire. Please suggest me how can I prevent that.

[@johnkelon1188]

what a liquid for the remove the glue mister?

[@MrPhoneDoctor]

Iso 99

[@johnkelon1188]

@@MrPhoneDoctor isopropyl 99% thankyu mr. phone master glass

[@process3475]

How to successfully repair the touch screen?. 1.Disconnect the hot plate machine and cryogenic cooler. How is the success rate high without defects during separation?

[@vahidramezani4379]

Hello, I am Vahid from Iran I am doing glass replacement work here, but I need a series of tools. Is there a place? Please guide me, what is the best tool to open the LCD? And what is a good solvent and glue? I mean, what solvent and glue are used?

[@MrPhoneDoctor]

Visit training.mrphonedoctor.com

[@gsmahamad9228]

You using liquid name ?

[@xx60sayf]

Hey, does someone know wich lamination settings to use for samsung a 50?

[@harvi3759]

Pressure 2.5, vacuum 180s lam 20s, 70C

[@truth5778]

@@harvi3759vakuum 50sec Pres. 1.5 lam. 15sec Temp. 75

[@harvi3759]

@@truth5778 nice! Do you really get good results with pressure that low though?

[@truth5778]

@@harvi3759 yes Bro

[@harvi3759]

@@truth5778 what about s7 edge?

[@Morpheus_of_the_07]

how much does it cost for you to replace my glass?

[@luckyman9903]

How much should a shop be charging for something like this?

[@MrPhoneDoctor]

13 pro/ 13 pro max. Anywhere between 260-350.

[@alihaidari8234]

Thank you

[@colombianito561]

ayeeee!!!!

[@jotapbtu]

👍👍

[@rkgsd]

And keep in mind Apple doesn't like anyone repairing their phones but Apple, so if it detects parts that aren't genuine Apple, the phone won't work properly.

[@BeyondWoWJunkies]

Aftermarket screens will function perfectly but a notification will appear. This doesn't change the OLED so the notification doesn't appear at all. You can also swap the IC chip from the original screen to the aftermarket screen to get rid of that notification if it bothers your clients.

[@alexanderraus8741]

hi which oca do you take? unfortunately I have blisters more often

[@MrPhoneDoctor]

Mitsubishi

[@alexanderraus8741]

Thx 👍🏻