iPhone XR Restoration - Back Housing Replacement

iPhone XR Restoration. Change back glass iPhone XR with the air station. In this tutorial we are going to change the broken back cover of this Apple device.
Today we are going to present a new model to replace the glass part of an iPhone XR. We are going to use a JBC air station, at 350ºC and 50% air.
✅ Battery HERE 👉 👉 s.click.aliexpress.com/e/_eOVDoD
❤️Repair Tools 👉 s.click.aliexpress.com/e/_dSy...
Be careful with the NFC antenna, which is right in the middle of the device. I personally like the air station more than the heat gun. It turns out that the heat is much better concentrated with the station's bullfighter
Please watch this video, and if you think it has been helpful, please give us a like, subscribe to our channel and share the information.
If you have any question about how to repair the iPhone XR ,please leave your comment above and we ll be glad to answer it.

[@MovilonePhoneRepair]

✅ Become an EXPERT👉👉 movilone.eu

[@jkim5043]

thanks to you, i completed all my job with iphone xr rebuliding. detailed shot was totally helpful! thank you a lot.

[@manaharlotia7233]

Very very tedious job but slowly n steadily completed in a excellent manner. thanks.

[@maccredo3270]

I was looking for the step on how to reattach the budge metal to the volume buttons, but you completely skip that part!!! All of these tutorials miss that part.

[@AmitSingh-ku8rs]

Best tutorial video i have ever seen

[@jimg8887]

Thank you for the information. I have a frame that does not have the speaker dust covers in place. Do you know how to remove those? It wasn't shown on your video.

[@mmaaddict78]

A bit late, but you can use a little isopropyl alcohol and a thin pry tool.

[@FLUFFS]

@@mmaaddict78 Thank you! That helped :)

[@abztheOG]

do you need the gold thing at 13:38

[@Fukkit_]

do you know why the top middle of the screen is not recognizing any touches?

[@MrOliatko]

Very nice and detailed video!

[@dmitriangu6559]

What is the purpose of gold strip @13.26 ? Blue case didn’t have it?

[@n5gravy772]

the gold strip at 13:26 is for nfc i think

[@user-wu3pd7ch8g]

شكرا 🤩

[@willielowe6895]

Thanks

[@royrogers9257]

Thank you

[@MovilonePhoneRepair]

Thanks for your comment! Best regards

[@rowensimpson4123]

very detailed. great work!

[@AppleReviews]

NOUP - @ 14:08 ALL CONNECTORS ARE IN WRONG PLACE!!!!!!!!

[@n5gravy772]

@@AppleReviews did the phone work at the end? yes so stfu as it all fit into place and he put in in how it came out so you just don’t know what your on about

[@MovilonePhoneRepair]

Thank you for watching this tutorial! Best regards

[@abztheOG]

Did you not put in the u spring hook on the power button

[@saeedfelemban1090]

Thank you very much your video is very helpful I replaced my housing and I didn’t put the NFC in the right position.

[@zeeshansamisami4354]

How much does it cost?

[@mekhaellaster9217]

20:53 you corp the video because you were put the screw at the wrong hole. and i also did the same mistake because i was following you when i doing my xr. I wish you were added a note or subtitle there but you didnt, you only corp the video bro, why you made me do the same mistake? :(

[@feftee605]

Skipped Power and volume buttons

[@user-wu3pd7ch8g]

😌😌😌😌😌😌😌

[@AppleReviews]

*@**14:08** ALL THOSE 3 CONNECTORS ARE IN WRONG PLACE !!!!!!!!!!!!!!!!*

[@LeCobra.]

What are you talking about noob? He is right that's the right spot for those connectors.

[@crazypt4308]

@@LeCobra. Are you fucking stupid? Yes he did put them in the wrong place. That’s not where it’s suppose to go. Before you try to educate others, actually learn how and where each pieces goes.