iRobot M6 Braava Jet Nozzle Replacement Fix

If you need a new nozzle, you can support me by purchasing my nozzle on amazon or ebay at the links below.
www.amazon.com/Spray-Nozzle-i...
www.ebay.com/itm/195733645342...

[@kollegs101]

Hi, had 13 of these come froma liquidation load and was able to repair 12 of them by watching this video. You just helped me make at least a $1000. God bless you Sir

[@brobots240]

You're welcome. What's wrong with the 13th one? Let's go for 13/13. Lol

[@kollegs101]

@@brobots240 13th one has a abad battery, thats all. Glad I found your channel

[@thorstenwalter8715]

Thank you for the video with the good explanations and tips. This helped me a lot today.

[@nisevi]

great video! thank you!!

[@drakemia4079]

Thank you so much very helpful

[@alexandervaldes7200]

thank you!

[@danfan470]

Sei mitico❤❤❤

[@carlaroman8139]

Where do you buy the nozzle, if needed? Thank you so much, your video is extremely clear and well done. 👏👏👏

[@brobots240]

In the description of the video has the links to amazon

[@macbouncer8525]

nice one, very good video. I'm sure I'll be doing this repair soon. Really not impressed with the M6, wont even go over textured floor tiles let alone through a doorway. Share a map? no, no, no... we dont need to share a map. pah! regret buying them - the M6 and the hoover (i9?).

[@thanghoangduc504]

Thank you

[@viper31415]

Do you have a spray nozzle for sale? I am in need of the nozzle. I got mine from a liquidation place and looks like the previous owner used mop and glo or some kind of wax. I was able to clear out most of the nozzle and got it to spray again but its not a wide stream it sprays more to the left.

[@brobots240]

Spray Nozzle for iRobot M6 & 240 Braava Jet - Replacement Part - Robot Mopping Vacuum a.co/d/0Van1BS

[@chuckschneweis9508]

Took my nozzel apart and soaked it, but cant tell if it is good now, I dont think so, but the part if 50 bucks on ebay. Is there another way to check the nozzel? Also I checked the operation of the pump using a screwdriver battery powered and think I reemed out the top. Where can you I get a screw to fit the middle of the pump? THanks

[@brobots240]

I probably have some of those screws laying around in my m6 hardware drawers. You can email me at [e-mail]

[@brobots240]

Here is the link to the replacement nozzle that I sell on Amazon and ebay. If you want to support me, please purchase my nozzle here: www.amazon.com/Spray-Nozzle-iRobot-240-Braava/dp/B0C15LS81N/ref=sr_1_3_sspa?keywords=irobot+m6+nozzle&qid=1688490223&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 or on ebay here: www.ebay.com/itm/195733645342?hash=item2d92a2681e:g:ZykAAOSwzT1kSq2F&amdata=enc%3AAQAIAAAA4MUKu%2F6rXr8IsAKks%2FjfNyc2UxfB5VbXXQkVmhw%2FRg8qkNuT9sZmKWPgcBuoyKT9ACe6042zliL6ZeDIuMw8vgINEwXlRa4AYpaGRrAg1FSO%2FFPX2j6TbrYoRpwbRVXTGBxBEdoYOF%2FFjX2KVV6%2Bhcpt687tRxSdWyWmZjN%2F69XdKajWV2wOx8Dfvd4bnyiVxjmoQMaSsBRjdH%2F9GZVF%2Fx6yiI4hYzF0v7i8cISBI7yyMJ330ZUdH8zTz5nWV51Y86ZC4552Svot4%2BbY9QZvfePwFS%2B0DXQspbGZ0t1Rd0hS%7Ctkp%3ABFBMvKCToaRi

[@user-dh5qc9pz2u]

My m6 wasn’t spraying and I think it’s the nozzle. But when I took it apart I noticed that I don’t have a filter (where you poured the water). Is this a defect? Do I need one? I’ve only ever used iRobot cleaners so the clogged nozzles a mystery. Your videos are great and if I can’t get my nozzle clean I will definitely order yours.

[@brobots240]

You need that filter because the middle of it presses on the bottom of the tanks valve release the water, without it, it won't spray

[@user-dh5qc9pz2u]

Where can I get a filter? I’ve never had one and it worked for a long time but could explain my repeating not spraying issues!

[@swinefeaster]

Thanks for the vid. My nozzle is the issue. Soaking it in rubbing alcohol didn't help. Trying acetone now. Any other ideas? Maybe I'll just let the hose hang out with no nozzle like a dong

[@brobots240]

Spray Nozzle for iRobot M6 & 240 Braava Jet - Replacement Part - Robot Mopping Vacuum a.co/d/0Van1BS

[@jenniferblair9456]

Can the plastic piece around the sprayer be replaced? Does it cause it not to spray if it fell off ?

[@brobots240]

Yes it can be replaced, it is mainly cosmetic but protects a small proximity sensor behind it as well.

[@chuckschneweis9508]

Great video, I cant blow through mine, what should I soak it in? Where can I get the part at?

[@brobots240]

You can try alcohol or almost boiling water. You may have to try a few times with the hot water. It's usually hit and miss depending on how clogged it is. Irobot won't sell this part, so ebay is the only choice, and they are hard to find usually.

[@nomanuk]

@@brobots240 same issue with me, nozzle is clogged. I tried soaking it in hot water for like 15 mins but didn’t help. Do you think blowing into it with something powerful would help ease the clogging?

[@brobots240]

@@nomanuk You can try compressed air, but that has never worked in my experience.

[@marieharnage6013]

How do you replace the water pump

[@brobots240]

I have another video on that if you look at my channel.

[@Morettijw1]

I still get no water…..I fixed the tube that dispenses water and made sure it shoots out of the spray nozzle. what else could it be? Should i replace the nozzle anyway?

[@brobots240]

If it sprays out of the nozzle, the nozzle isn't the issue. Did you watch my video on the pump fix? If so, and it doesn't spray after doing everything in my other video, then the issue is a water delivery issue, most likely the tank or filter screen is clogged

[@Morettijw1]

@@brobots240 yea i watched your other vid on the pump. When i spin it with the screw driver water shoots out when i put it all back together nothing happens…this machine is so frustrating.

[@Morettijw1]

@@brobots240 could the tank be clogged?

[@brobots240]

@@Morettijw1 either the tank or the filter screen that the tank sits on. Something isn't letting water in. Trying filling the tank and pressing the button on the bottom over a sink and see if it dispenses water...if it does, it's most likely the filter screen

[@Morettijw1]

@@brobots240 its the filter screen seems like its too tight water cant pass through. Can i soak it in vinegar? Or buy a new one? Found em on ebay

[@bhavinchauhan1381]

Where can I buy a replacement nozzle?

[@brobots240]

You can get them here on Amazon. Made, sold, and shipped from U.S --- Spray Nozzle for iRobot M6 & 240 Braava Jet - Replacement Part - Robot Mopping Vacuum a.co/d/0Van1BS

[@jroc523]

Where can I find these replacement spray nozzle?

[@brobots240]

The only place to get them is second hand from ebay. Irobot won't sell them.

[@chuckschneweis9508]

@@brobots240 They are 50 bucks, pre warn you.

[@brobots240]

@@chuckschneweis9508 yeah they usually run 35-38 with free shipping. If available. You need to take into account most parts are pulled from working irobots that could easily be sold as a whole. So the sellers need to make the same amount in parts if they sold it as whole irobot. So the most popular and needed parts are usually the most expensive, but still alot less than purchasing another irobot.

[@chuckschneweis9508]

@@brobots240 Yeah I am thinking about putting this back together and sending it back to the company its 8 months old. I wish I would have never gotten this one, it takes a shile and not hugely pleases with the result. If they dont take it back f it.

[@ros3red]

Probably not ideal or recommended by the manufacturers, but I put hot water into mine to clear up the nozzle.

[@drakemia4079]

Thank you so much very helpful