Ironman 4x4 PRO Forge UPPER CONTROL ARM UCA Upgrade Install & Review Nissan Navara NP300 D23

[@-PORK-CHOP-]

You were very eager to show off your probably "gifted" IRONMAN suspension, it would have been good to do a follow-up video for the recall on this UCA, to let people know there is a risk of failure causing an accident, Here is the official wording on Ironman website for others to take note of, We've identified that the ball joint of the Pro Forge Upper Control Arm does not meet the Ironman 4×4 standard, whereby premature wearing is occurring. Consequently, the Upper Control Arm may fail prematurely, creating a risk of accident or injury to the vehicle occupants and other road users.

[@Australian4x4Adventures]

Nice work Mr Racin. Glad to see you finally got that front end sorted. We’ve had lots of conversation about it over our time. Nice vid too 👍👍👍

[@racinsadventures597]

Ahhhh geezzz thanks Mr YT. Really appreciate you watching and your feedback. Always means sooo much. 🙏🏻💚 well as they say good things happens to people that wait. I was a patient boy.... and sooo greatful to finally get my front UCA’s in enables me to further fine tune and get it to work better then ever. 👌🏻👌🏻

[@lmalesci]

I have a question for you and I would like to know if you can tell me if it is true that the ironman nitro gas shock absorbers go well with the standard original trim and can they be adapted with the +5? I have a Suzuki jimny 4x4 with m13a petrol engine 1.3 lt petrol with factory standard shock absorbers and suspension set-up yesterday afternoon I picked up the new ironman nitro gas shock absorbers and the 4x4 spare parts dealer in Florence told me that these ironman nitro gas shock absorbers are fine for 4x4 off-road vehicles with a standard factory set-up or in a second I could put the springs higher and it becomes a high set-up +5 is it true? Greetings from Florence Italy!

[@Sunderlanding_AUS]

this did not age well 😅😂 did they take care of you with the recalls and BJ replacements?

[@scotchyscotchyscotch569]

What I like to know is, where is Ironman 4x4 foamcell pro kits and pro forge upper control arms built?. Are they made in China or Australia or somewhere else?. My mechanic was dissin on ironman cause he said they’re Chinese made, which might be a misconception on his part?. Cause I thought they were American slash Aussie manufactured. I’m in the decision of getting a full suspension kit for my Dmax from Outback Armour (adjustable bypass shocks) and buy the ironman pro forge control arms. Or go full ironman 4x4 foamcell pro kit with the pro forge upper arms.

[@cameronknudson8746]

What size tires are you running on this truck?

[@Johnnywraphood]

Great work mate love the edit you did on this

[@racinsadventures597]

Thanks mate ! 🙏🏻🙏🏻💚💚 really means heaps coming from you ! 👊🏻

[@mind0nr3wind]

What traction board mount is that? I’m looking to offset mine the same way on a prinsu rack!

[@Beers__On__Tour]

Awesome video mate very informative loved it

[@racinsadventures597]

Thanks brother ! Thanks sooo much for watching. Always sooo grateful. 🙏🏻🙏🏻💚💚

[@paulsordello]

Great video mate, thanks for sharing. 👊🏼

[@racinsadventures597]

Thanks mate.... thank you for watching. Always means sooo much... thank you 🙏🏻💚

[@MudducksTouringAustralia]

I will investigate these for my Ranger. Cheers Steve

[@racinsadventures597]

Hey Steve, thanks sooo much for watching 🙏🏻 always so grateful. Yup they are available for the Rangers.... check them out 💚

[@kirkhamster0024]

How long do the greaseless IM ball joints last? Any warranty on the bushings and the UBJ? Also, how easy is it to replace the UBJ?

[@marcusbarnes5929]

How do these compare the superior engineering billet upper control arms?

[@JudasBytes]

Does the Ironaman4x4 UCA work on 2017 Ranger? Are the balljoints replaceable or serviceable? How come there's no cover on the balljoints? I do not believe dust won't be able to go inside the balljoints!

[@westernfilters1]

Nice video mate !

[@racinsadventures597]

Thanks mate really appreciate your feedback ! Always so grateful.

[@bradneville2021]

Awesome video and review... might have to do it now

[@racinsadventures597]

Thanks sooo much for watching brother ! You saw first hand how good they worked on the tracks... Definitely UCA’s that you have to seriously consider for your setup... 👌🏻👊🏻💚

[@kghuamin4077]

I’ve bought iron man forged uca but with stock coils in front , solved the problem hitting the top strut mount , but the articulation or play of the suspension not that good , would you reckon if a change my front coils?

[@stevedupree6868]

Cool video!

[@racinsadventures597]

Thanks legend! Thanks for watching 🙏🏻💚

[@Juanca22221]

Can this upper control arm be use in a tundra trd pro with stock height?

[@thecap3189]

What size lift did you have before the new uca's and what size did you upgrade to? 🤟

[@Azntrutek2012]

Maybe it just me but There aren’t much differentiate of the gap between strut bucket and OEM UPC arm vs to ironman. Does it worth to pay for the upgrade ?

[@dangerdanadv1445]

That little bit of gap is the difference between "CLANK" and silence

[@royvinator1945]

Where are Ironman products actually made? Thank you.

[@lukeambrose3787]

How much lift in the front now after the upgraded springs? I currently have foam cell pros an would love to get more height from them

[@joshuamartinez1929]

what wheel set is that??

[@alphascout1]

I have a 2019 Nissan Frontier and like your yuca, where can we purchase one in the USA?

[@craesh1001]

These look identical to the Nismo upper control arm. Probably the same thing.

[@damosugden7264]

Will have to see if they do one for my Pajero

[@racinsadventures597]

absolutley mate. Check out there website www.ironman4x4.com and fingers crossed they have them for the Padj. Thanks again for watching bud ! Always sooo grateful.

[@oneofthesedays4700]

Can't wait to see your follow up video once you have used them a bit on the tracks :)

[@racinsadventures597]

As you know I was chasing the Magic last weekend. And wow !! Everything has changed.... the front really works much better now and has realised some more potential & articulation.... looking forward to keep fine tuning 👌🏻👌🏻👌🏻

[@Morgs148]

great vid. i have ironman in my d40.

[@ziggycuzz4684]

Great vid mate. I’ve been waiting for these for a while now. Looking to put some on my rig. How much do they retail for???

[@racinsadventures597]

Thanks for watching as always.... 🙏🏻💚 YASSSS like me I was patiently waiting for the right UCA solution..... the best upgrade I have done to my front end so far....

[@ziggycuzz4684]

Racins Adventures how much do they cost ??? 👍🏼

[@dangerdanadv1445]

I just want that Jimny in the background, but I'm American :'(