Ironman 4x4 Foam Cell Pro Suspension Kit Suited For RAM 1500 DS | Install Guide

[@Daniel_Madrid]

Hell yeah. I called a year or so ago and asked if something like this was in the works. Also, I have an Ecodiesel if y'all need a test vehicle!!

[@Juanito23384]

Nicely done. Learn something new every time I watch your videos. Keep it bro.

[@Advntrwrx]

It technically would work with airride, but you would be deleting the air ride, and you would need an additional rear spring isolator

[@tysonfoshee7624]

I snapped a cheap harbor freight 21mm box end off just the right length for those pesky upper shock bolts... broke my wrench, but created the perfect tool for that job.

[@Ironman4x4America]

Ha! Yes, those often make for a good "modified" tool!

[@victorpapaavp]

When I did my suspension, for the driver's side rear bolt I just loosened the fuel tank straps and dropped it out of the way enough that I could get a hand in there with a ratchet. I had a transmission jack handy for it as well, made it super easy. It might take some doing/stacking 4x4s if you're doing it in the driveway, and you'll probably need a floor jack, but let's be honest, if you're attempting this in your driveway, you've got a way to jack your vehicle up relatively easily.

[@mikemorgan4670]

Another good one. Always interesting.

[@albertbrucker136]

What bumper is the one on the cover picture?

[@Ironman4x4America]

That is our upcoming Raid front bumper for the RAM. Stay tuned...

[@albertbrucker136]

@@Ironman4x4America it looks good!

[@nickm2313]

Did you install the comfort springs or performance springs on this truck? What were the hub to fender measurements?

[@Ironman4x4America]

With the added weight of both bumpers, winch, and armor the Performance Load or Medium coils were the right choice. I don't have the before and after lift hub to fender measurements for this particular build handy.

[@nickm2313]

@@Ironman4x4America looks good. I plan on coming by your HQ in the near future to get these installed.

[@Advntrwrx]

Back to this video for me, I found out my rear shocks shipped to me are Comfort valved, but you have 3 different offered(just not offered when purchasing the kit) Comfort, long Travel, and longtravel/comfort. Which rear shocks were installed on this ram?

[@Advntrwrx]

I also have almost triple the threads showing on the bottom of the shock, came like that from factory and i havent adjusted, front end is still raked lower than my rear 2 inch spring

[@Redbanji]

Does this also work for 3.6l 2wd??

[@Ironman4x4America]

Our R&D and fit testing is done on the 4WD models. We do not know if the frame is the same across both 2WD & 4WD.

[@eascencio847]

No rear sway bar links?

[@Ironman4x4America]

Not needed in the rear with this 2" lift.