How to Replace Rear Driver Side Window Regulator 2005 Silverado Chevy | 99-06 GMC Sierra

Thank you for watching!
If you enjoyed the video please Like and Subscribe for more!
Here is a link to the window regulator that i used: amzn.to/3xFgQZb
Music Credits:
Disfigure - Blank [NCS Release]
Short Trip by Roa / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/roa-music-short-trip
Music promoted by Audio Library • Short Trip - Roa (No C...

[@austinl18]

Been dreading this project for wayyyyy tooooo longgggggg. Now after watching your video, I am kicking myself in the ass for not getting it done sooner! Thank you!

[@MaxF01]

No problem man, hope the video is helpfull and i hope it goes well!!

[@josemoreno3334]

I just put in two new rear window regulator's for my brothers 06 Sierra. Watching your video made it easy for me to put them in. Never done that before, You made it easy to understand how to do it right. It saved him a lot of money and I learned something new. Thank you so much and my kid brother say's thank you too.

[@MaxF01]

Hey man thats super awesome to hear! Im so happy that the video was helpful and you were able to get it done👍🏼 im happy to have been of help!

[@speedybeak]

How long did it take to do both sides total?

[@neverforget1811]

Thank you so much for doing this video . I fixed my 2005 Chevy suburban driver rear regulator . Got the parts from O'Reilly . My mechanic try to charge me $322 . You help me so much with this video and save me so much money . Thank you again God bless you and your family

[@billestes4335]

Great video. Did mine in about 45 minutes. Always good to see a good "How to" video if you don't know!

[@foundwanting1]

Thank you so much for the video. You made it look as easy as it was. I had more trouble installing the door cover,than I did removing and installing the regulator. But once I was done it worked out perfectly. I followed your step by step tutorial and it worked out for me. Thanks again and I truly appreciate it.

[@zettevotto7637]

Thank you! Thank you! Thank you! I didn't know how difficult this would be but a friend (female) told me she had done it on a different vehicle and it wasn't too hard, so I just Googled how to fix a window on a 2004 Silverado that was off it's tracks. Hmmm, I learned a new word "regulator" was the correct term! I watched a couple of other KZbin videos but none were as close to being as informative or well spoken and filmed to help someone like me that had NO IDEA what she was doing! My husband helped me in small ways like reaching two bolts that I couldn't (my window had completely fallen and wouldn't move up) but 95% of this job was done by me! I'm so happy and he's so proud of me. I told him that it was your video that helped me! Thank you again!

[@MaxF01]

No problem!! Im so happy to hear you were able to get it fixed and im happy to hear the video was helpful!! Thank you for the comment 😁

[@johnrheiner3234]

Super clear video. Got the parts from Amazon, $65 with shipping, 2 days. Followed your instructions to the T. Took me about 30 minutes. for the drivers side rear window on my 2002 1500HD Silverado. Works perfect. Thank you.

[@frankmartin3182]

Dude you're really good at this I was a mechanic for years and once in awhile I just need a refresher course on where the hidden bolts are you have a really good means of explaining thanks keep it up

[@MaxF01]

Thanks dude I appreciate it!!

[@MROJPC]

Excellent tutorial! Just did this on a 2005 Silverado 3500 Crew Cab. Amazon had the part I needed for a cheaper price than dealership and it was a pretty quick job thanks to this video.

[@MaxF01]

Thank you! Im glad to hear you got it swapped out!!

[@billadair1868]

This was definitely not on my very long list of things to do today but by mistake I lowered the window...in the rain...!!! Your video made short work of this replacement. Thanks a bunch!!

[@MaxF01]

Im glad it was helpful, no problem!!

[@jimchasten9514]

Well done young man. Helped greatly . Easy to follow with my limited ability.

[@MaxF01]

Thank you very much Jim! Im glad you were able to get it done!

[@robertcox5799]

Just accidentally rolled my rear windows down this morning, and now my same window won't go all the way back up. Thanks for this video! Looks like I have a little weekend project now. 😂

[@71FordGator]

Great Video. My 2006 Sierra has need this for years. Lots of Gorilla tape holding it closed for the last 2 winters. I've seen other videos but not as close and informational as your video. You did a very good job of explaning exactly how to do the job. Thank You.

[@anthonyvaccaro7900]

I'm not a mechanic but this video makes it look easy. Then doing it, it was just as easy. He gives socket sizes! What a concept! Thanks bro, God bless

[@MaxF01]

Im glad it was as easy as it looked! No problem man, God bless

[@jeffsullivan1958]

Great Video, helped me replace my window regulator quite a bit. Thank you

[@WaldosWorld]

Thanks. I'm about to do mine and this video helped 👍

[@MaxF01]

No problem man! Ive seen your channel before, you do some awesome stuff!! 👍🏼

[@stanleyjohnson1392]

Young man that was simple instructions on doing. It's was not so drawn out. Thank you so much.

[@MaxF01]

Thank you so much and im so happy you liked it!

[@paulhare662]

Looks like finding my 10mm socket is going to be the hardest part. Thank you.

[@MaxF01]

I can relate! No problem 👍🏼

[@johnlivingston2253]

Great video! Exactly what I needed to see. Very simple, clear and concise! Awesome job!

[@MaxF01]

Thank you!!

[@danresciniti]

Thanks again Max! I used this video to do the passenger rear about a year ago...watched it again to fix the driver side rear door today.

[@MaxF01]

No problem man im glad to hear that!!

[@ericatwood856]

This was extremely helpful. Made it so easy to understand and it took me no time at all to fix mine. Thanks Dude!!

[@MaxF01]

No problem dude im glad it was helpful!!

[@derrickraney4560]

Thank you! Done, 30 minute job with this video.

[@davidupvall8858]

Thanks you helped me repair my rear power window.

[@MaxF01]

No problem I'm glad to hear it was helpful!

[@travharrell1713]

Awesome. I have done this in the past a couple of times. This was a great refresher course. I'll be checking your other videos.

[@user-lt8ns9ql1k]

Thank you! Your video was easy to follow. Did both back windows.

[@andymccloskey8039]

thanks a bunch! got the part for around 50 bucks and half hour of my time and works perfect now

[@MaxF01]

No problem im glad to hear!

[@kevinkearns4164]

Awesome video. Start to finish took me 45 minutes. Thank You.

[@MaxF01]

Thanks man glad you were able to get it done!

[@JohnHLovin]

Well done! Narration, video and lighting was perfect. I’ve been riding around for months with my left rear window taped up with black Gorilla tape and watching your video has inspired me to order the damn part and do this repair myself.

[@needhamwilliams3133]

Appreciate the video it was accurate to the point I love the way you were just talking about the window and the railing and not having a TV show😂 😂😂

[@GerardoFLara]

This is awesome. You couldn’t and shouldn’t have to explain it any better. This is pretty straightforward. I need to replace that exact part, and this is the only video I have seen and the only one I need to see. 👍🏼👍🏼 thanks for the info man.

[@MaxF01]

Thank you! No problem im glad it was helpful!

[@billadair1868]

Excellent video. My window failed just today and I was glad I could get it back closed before the rain starts. The instruction in this video is great! Thanks especially for the extra tips. Also, I was amazed at how fast you could work... Sorry my smart aleck gene was dominant today...

[@MaxF01]

Thank you!! 😁

[@davejohnson3860]

Did exactly the way you did it! Flawless!!! Thank you for saving me roughly $350.00!

[@dennismorris6849]

Thank you sir ! You made easy on my 2004.5

[@MaxF01]

No problem sir! Im glad it was helpful!!

[@juggelio176]

Your video was more helpful than the others I watched. Thanks and keep up the excellent videos

[@MaxF01]

Thank you!

[@vwzx7]

Great vid! Made my repair easy!

[@user-ev3zo4cg3i]

Thanks Max! Took me about an hour. I would have been guessing without your vid. Thanks again. Great Job!!!

[@deanrobert9953]

Thanks for the post. Got the repair done without issue. Went well. Cheers

[@MechArm1]

I appreciate you! I'll be tackling this job tomorrow and now I have full confidence.

[@MaxF01]

No problem! You got this!! 💪🏼👊🏼

[@divemonstermont]

Awesome video man. Made my repair go smooth and easy. Thanks for giving sizes and everything!

[@nitrojunki4249]

Very nice job buddy, I debated on weather it was going to be worth it for me to dig into this. But after watching you, no problem. Thanks

[@MaxF01]

Thank you Gary! Glad you were able to get it done!

[@dgreen6987]

Good vidja .. Thank you for putting it out here guy.

[@jacksheffield620]

Helped me, thanks a lot!

[@timshoemaker.9752]

Omg thank you 🙏 my window fell down and I’m leaving on a trip tomorrow- hopefully I can do this or at least reconnect it

[@MaxF01]

No problem! You got this! 💪🏼

[@kilocabrera1]

This helped me out big time. Clear n direct. Easy. Thank you

[@MaxF01]

No problem im glad it helped!

[@mexiboy1000]

This video has saved me twice! Thank you!

[@MaxF01]

Im glad to hear, no problem!

[@ob1257]

Just got done with my replacement, thanks for the video. Saved me lots of 💰!! Subscribed

[@MaxF01]

No problem im happy to hear you got it done!💪🏼 thank you for the sub! 🙏🏼

[@scottrognlie9531]

Great tutorial! Made it easy.

[@icantfindausernamify]

Thank you for making this video. It was super easy to follow along and I was able to get it done no problem

[@MaxF01]

No problem im glad to hear!

[@skyclown1]

Good job on the video. Big help.

[@BK-go8fk]

Great video and to the point. Thank you

[@MaxF01]

No problem!

[@kevinkohler9770]

Just what I needed thanks

[@MaxF01]

No problem glad it was helpful!

[@johnshields2340]

Thank you very much for the information!

[@MaxF01]

No problem!

[@vxxozxxv]

Very helpful. Much appreciated!

[@jakebowers9237]

Thanks for the awesome video man! It was very helpful!!

[@homeroserrano3865]

Nice Video! Thank you. It worked great

[@MaxF01]

Thank you im glad to hear!!

[@davidmowbray5923]

This video saved my day! Thanks!

[@MaxF01]

Im glad to hear!! No problem!

[@shawns4017]

Thanks Max! That made the job easy.

[@MaxF01]

No problem Shawn! Im happy it was helpful!

[@joseraygoza7808]

Thank you so much! You are a great help.👍

[@timothyspencer4347]

Thanks, I just replaced mine and thanks to you it was a piece of cake !👍

[@MaxF01]

No problem! Im happy to hear!👍🏼

[@jerseyboy3519]

I would like to thank you for this video! It was excellent & the Amazon reference worked out well! Thanks again for your video.

[@MaxF01]

No problem, thank you very much!!

[@REALZ11]

Well done. Easy to follow, thanks

[@MaxF01]

Thank you!

[@stevegann3251]

Thank you for making this video . Be careful to tape the window up well if u don’t have the new part available .

[@MaxF01]

No problem and thats a good idea!

[@fistteam]

Subbed your channel my man! I had ordered a new window regulator for my ‘06 Silverado over 2 yrs ago…It has sat in its box in my garage ever since, cause I thought: “Dang that’s gonna be an arduous task & I don’t have time right now…” Welp, watched your video & completed said “arduous task” in about an hour!! I’ve still not replaced door panel & hardware yet, cause once removed panel, need to replace those rotten door speakers while at it. That’ll be a job for another day however!! 😂

[@MaxF01]

Thanks for the sub my man!! Im happy to hear you got it swapped out!! Haha and there’s always something else that needs replacing 😂

[@tamac38]

Great Video, THANKS !!

[@MaxF01]

Your very welcome!! 😎

[@braydonmignard4165]

Thank you! Very helpful video got it done no problem! Just follow the steps!

[@MaxF01]

No problem! Im glad it was helpful!

[@brianoberhausen5153]

Thanks. Excellent step by step.

[@MaxF01]

Thanks Brian

[@adamr.bellinger385]

Thanks man, video helped alot!

[@MaxF01]

No problem man im glad to hear!

[@shawnmorin3848]

Nice job on the video!

[@user-yv9ti2gi3y]

thank you for this brother

[@MaxF01]

No problem!

[@jasonmorales1846]

Thanks for the video.I have to do mine and it looks pretty simple.

[@MaxF01]

No problem, you shouldnt have any trouble 👍🏼

[@jimmyfinke6759]

thank you soo much for your video, i've never done this before but after seeing your video. i got this!!! thank you

[@MaxF01]

No problem and you definitely got this!!! 💪🏼

[@joeyv4301]

Great video. Thanks for the info

[@MaxF01]

Thank you! Im glad it was helpful!

[@ezequielvalenzuela6675]

Thank you so much Your video was very helpful

[@MaxF01]

No problem im happy to hear!

[@z28merlin61]

Very helpful video. Thank you

[@MaxF01]

Im glad it was helpful, no problem!

[@fredsrickhirayama8260]

Thx bro, made job easy..👍👍

[@MaxF01]

No problem bro, glad you were able to gettr done 👍🏼

[@rickmercer6437]

Thanks sooooo much very good video. Appreciate you man!

[@MaxF01]

No problem, and thank you!!

[@Eochoa197350]

Great video 👍🏻

[@MaxF01]

Thank you!! 🙏🏼

[@CarterRumsey]

nice job explaining it 👌👌

[@MaxF01]

Thank you very much! 🙏🏼

[@GerraldFarms]

Thanks for sharing.

[@MaxF01]

No problem!

[@bingorn]

Very well done vider

[@MaxF01]

Thanks a lot Brian!!

[@pablomagana6002]

Gracias me ayudo mucho

[@ImRogue1]

Thanks Max!!!

[@MaxF01]

No problem!!!

[@jameswelch3621]

Great video, I am not mechanical; but your video guided me through the process in about an hour. Thanks again!

[@MaxF01]

Thanks a lot man im glad it was helpful!

[@brucebfd]

Nice video.. wish me luck..

[@MaxF01]

Good luck!! 👍🏼

[@jasonochs8369]

great video. My window got stuch down yesterday and am going to tear the door panel off to see whats up. I do have to ask...whats that creaking/binding noise at 7:15? thanks for posting. Im headed out in the hear right now to start this!!! edit: I would like to add, to those getting ready to do this job, the top bolt holes are slotted and big enough to allow you to leave the bolt in when reinstalling. This may help some of you with realigning the tracks when putting things back in. Just so you arent fighting the thing trying to find the holes or starting the bolt. hang the track from the bolts in place on the top, then do the bottom bolts, if that makes sense

[@roarlien2356]

Thanks for this. Demystifies the whole process. Do you recommend lubing the tracks?

[@ourworld961]

I appreciate the video. Is there a certain place that you order older model parts for an 05 suburban?

[@charliebowers7131]

Hi, good video Yours was the one I went with, simple, to the point, I liked it Got a question tho; what was the piece that fell off and hit the ground as you took the door panel off? Did something come loose or break in the process? Not to nit pick you, because mine did the same thing, something was loose and hit the ground as I pulled the door panel off It looks like a plastic hook, kinda of like the others that are part of the door panel I was wondering if it's important Thanks again

[@PSExcavationsLLC]

Great video - would anybody know if the rear speakers are the same as the front speakers? Same part # ? Thanks 👍

[@user-gz5yd1di7s]

You mentioned a cable broke, was it a small braided cable with a anchor so to speak that looks like it should be connected somewhere?

[@rickl6697]

If the cable didn't snap is it lot easier to just replace the motor if gear is stripped. Do you have to remove the whole thing to replace the motor.? Thanks for posting

[@bmailey984]

Thanks. Can you post the link to the part to buy?

[@reiready8847]

Great work! This is pretty much the same for an 05 Escalade correct? My window fell down into the door today.

[@MaxF01]

Thank you! I think so but cant say for sure. Good luck to you 👍🏼

[@bingorn]

I followed the instructions in the video but not exactly- I should have - it seems it is critical to not force and clamp the window before the rest of the stuff is tight. Did it again exactly as shown and it worked great. Thank y but follow the directions as shown

[@gts_duragkeezyyt8983]

how do you change jus the cable

[@MrTobhag]

Awesome fucking video

[@MaxF01]

Thank you!

[@marcrussell8485]

what if the window is stuck in the down position ?

[@WillyEarl098]

So I got everything removed to the Taping window up, but the window won't go all the way up manually...it hits a snag and I don't want to force or remove the regulators/motor until I can get it completely up to tape it...or doesn't it matter? Any Help is appreciated.

[@MaxF01]

Were you able to loosen the clamps holding the window in place?

[@WillyEarl098]

@@MaxF01 well I tried to ensure the tracks were lubed and the window door gaskets cleaned ...but the window dropped from my lubed fingers 100% down..I think I can move it up a a bit to access those window clamps...at this point is seems to be off track and not raise only about 6 inches ...not sure it 5am here so taking a break ...so loosening will separate window /clamp from regulators right? ...will that allow me to manually press & lift the glass, then tape to keep up... mostly up hopefully, to put new regs/motor? I thought I'd likely have to remove glass from clamps to be able to change the parts, the reseat the glass in the clamps...don't want to do that. I clearly needed another set of hands, but mid of night, so... . thanks for the help...

[@inutil6117]

Man, I cannot find a video on this for a 2007-2013 Crew Cab Silverado!

[@MaxF01]

Shoot sorry man wish i could help you out! Have you tried taking it apart to see if it’s similar at all?

[@ab5bx]

@@MaxF01 kzbin.info/www/bejne/eZPMY5iYmbB7aqs kzbin.info/www/bejne/hXPGfoWiZp5mgc0

[@ab5bx]

kzbin.info/www/bejne/eZPMY5iYmbB7aqs kzbin.info/www/bejne/hXPGfoWiZp5mgc0

[@txs.hector6528]

Anyone’s windows when they rolles half way and are driving start to shake (back windows)?