IS IT ENOUGH HP? 408 STROKER ON3 TURBO FROM DYNO TO STREET! BIG HP?

[@mikemcdonald2975]

Hell yeah

[@BREW2LFOXBODY]

Damn she's gonna be NASTY!! 😱

[@Neomustangs]

Yes sir lol! Went too far to turn around. As we spoke about on our stream and phone. Gonna be a dedicated street strip car. And vlog the crap out of blk and dads car

[@89gt5.0]

Look out Brew2l ...time to swap the 347 in

[@BREW2LFOXBODY]

@@89gt5.0 way outta my league 😕

[@BREW2LFOXBODY]

Oh yeah! Here we go

[@Neomustangs]

Yes sir ! I’m kinda not happy but this is only break in and my motor is backing up. As we will speak about soon. Gotta introduce them new stuff (we’ll forgotten parts)

[@camoneill168]

That’s sick

[@Neomustangs]

Ty

[@brazenmight6764]

Love the videos man, crazy amount of info on your channel.

[@Neomustangs]

I appreciate that

[@brawler3475.0]

Just had my 86 on the Dyno sbe 351w 7875 vs racing turbo made 630 tq 627 hp

[@mister313rd2]

Nice!

[@Neomustangs]

Thx

[@natemattingly9838]

That car is badass man!!

[@Neomustangs]

Thx man

[@turboman351w3]

NEO THAT WAS THE BEST ADVICE ABOUT BRINGING YOUR CAR PREPARED TO THE DYNO, SO SO TRUE, ALWAYS BRING YOUR CAR READY READY FOR TUNNING.

[@Neomustangs]

Thx its gonna be another video later. My experiences and what i have seen on the dyno .

[@dennis17116]

Swap the intake out for Holley EFI high ram side mount. Way better intake and make more HP and TQ.

[@Neomustangs]

I’m good ty

[@GearHead704]

I hope to build a 408 some day. Will.be cool to follow this project

[@Neomustangs]

Man your on fire over there with that coupe resto now a vert !

[@GearHead704]

@@Neomustangs Yeah the vert is my baby. Had that one 16 years. Hope to get it running this weekend.

[@turboman351w3]

NEO YOU WHATS REALY GOOD IS A HUB DYNO IS LIKE THE NEW THING NOW.

[@Neomustangs]

Ya... i see that now.

[@jrusted5.031]

Dope! Them Terminator cobra better be ready

[@Neomustangs]

Right

[@molokaimonster]

Great video as always..I'm building a 351w for my sn95 with automatic transmission. It already has the knocking 5.0 in it so hopefully I can use all the msd stuff and the transmission will bolt right up I plan on spraying it a little..it kills me how low the view numbers are on your videos when they are clearly more informative and relatable than most mustang guys out there..all the way from Florida you are the man ..keep em coming bro

[@Neomustangs]

Ty !

[@775automotive9]

Badass 👍🏼

[@Neomustangs]

Th

[@ryandevore3384]

Hey man is this stock block or a dart?

[@Neomustangs]

Production 351 based block.

[@boosted408w]

What cam you running?

[@Neomustangs]

Custom

[@19jody72]

That look on your face days it all! Good stuff bro!!!

[@Neomustangs]

Haha ya I was excited

[@jpp9846]

Loving the popcorn D 👍💪

[@Neomustangs]

Haha

[@roygustafson7729]

Keep em coming Dan 🙏💪😎👍🍀🐎🐺

[@Neomustangs]

Will do !

[@jakejohnson3523]

Your face at 12mins 50sec (Priceless)

[@Neomustangs]

Hahha yes.

[@ponypwr]

Sparkplugs. Do your research, have the correct plugs and gapped correctly for your application before going to the dyno. Saves time, saves you money! Makes more power and safer.

[@Neomustangs]

NGK BK6REy gapped at 23. I know my plugs

[@jasonbollman]

Nice! I'm looking to do a similar build to this next year.

[@Neomustangs]

Nice gl !

[@Ghosts_and_Cars]

399

[@CJWashington1]

I could use your help. Man I've been watching your videos for almost 5yrs now wen I had a 302. Now it's a fresh bare block 347 and I had the rings gapped ".002" for the turbo set up

[@shoptimewithshay]

how you liking the super duty? bad ass build. love the white car.

[@Neomustangs]

Love it!

[@joey4872]

PUSH ROD POWER wat waaaaat 🤪

[@Neomustangs]

Yes sir joe !

[@timothygell9569]

What trans are you running? sounds amazing

[@Neomustangs]

T56

[@frank3stangs]

Nice video! What size tire, rim and back spacing are you running? Why Hoosiers over micky Thompsons?

[@Neomustangs]

10.5 wheel. 28" hoosiers for street/dyno only.

[@frank3stangs]

@@Neomustangs Nice! Whats the back spacing?

[@jerryburks2755]

why can't u get 600 HP all motor I have a 398 w and it puts out 500 HP only 660 with a turbo something we

[@arturo5819]

She's making power! Hey Dan did you ask the mad scientist about making me a start up tune?

[@Neomustangs]

Sure

[@arturo5819]

@@Neomustangs let me know! Do I send you my setup or do I send it to him?

[@HaltomAutoworks]

Badass man! You got me pumped to finish my YSI blown 410W, you got me wanting to keep a stick shift in it as well🤔

[@Neomustangs]

Yes sir !!

[@stevenhowell8294]

What's engine setup. Heads and camshaft, gear. Tire size. I'm building a hatch with 408 tko

[@Neomustangs]

Afr 205. TFS box R. Custom cam.

[@titangaming1635]

I’m putting a 408 block in my 89, it has the same intake. What hood are you using that will clear that?

[@Neomustangs]

Cobra R svo

[@turboman351w3]

ITA AN ANINAMAL

[@Neomustangs]

ITS ALIVE!!!!

[@hystyk19]

Sweet channel! I saw your post about differences between 351w-302. The main caps are stronger due to the thicker webbings. The Mexican 302 or crate engine, replacement block aka new block 2 bolt main 700hp on pump gas. Same for the 351W. If you want to eat 1000hp cars, find a teksid 4v aluminum block rated to 1500hp. 96-99 cobra also found in some Lincolns. 5.4 4v is another monster too. Cheaper to build over a coyote

[@Neomustangs]

Good info ty

[@2vgod460]

Your hatch looks sick, I like the fox mustang but, I never really liked them the way the world thinks they are so so crazy blah blah, 100 percent they cool and all, only stang I ever really like and now own that as of today dyno day in Canada makes just shy of 1000hp pump gas a lot left in her 67/66 turbos, The car is teksid block, weisco boostline rods standard length pistons are a customs diamond with a 9.5 compression ratio, crank is a forged mmr 4.75 crankshaft! It was a new 4.75 stroker from mmr 1000se that I had in my garage for about 2 years! Lol and now ripped the mmr/Manley pistons and Manley rods out and make it to handle 2000+hp 😂, full interior convertible new edge

[@Neomustangs]

Thanks again !

[@bigj7807]

Is this a stock block or aftermarket ?

[@Neomustangs]

Production

[@bigj7807]

@@Neomustangs hell yea I have a 408 with a 80mm production . How far are you going too push it ? 1000hp? What fuel

[@roygustafson7729]

It never dawned on me none of your cars have a spoiler! How did I just now notice this 😎

[@Neomustangs]

It’s only for racing. They have spoilers

[@handmethatchingadera]

I have a question on the turbo. I’m working on a 408 for a truck and plan on using comps 282 HR cam for some lower grunt and dart iron eagle heads on a 408. Do you think a 76/75 turbo would work to make 700whp well on a lower winding 408 or should I step up a little in size? I will be running a c6 auto and the truck is a crew cab 4x4. I’m wanting to make big power but bring it in quickly for torque. Awesome cars and awesome channel Dan! That smile when you got on it says it all!

[@Neomustangs]

Im finding out that a 76/75 is chokin up around 600/650/700 ish wheel causing lots of back pressure at turbo and downpipe.

[@handmethatchingadera]

Thanks for the information I think I’ll step up a bit then. Can’t wait to see more videos.

[@2vgod460]

Wow that shot you took when walking around the back of the car looked like a thunderbird

[@Neomustangs]

Ty

[@JasonJones-fb2zf]

What size turbo you got in mind to feed that 408? I have a similar setup(408 with on3 78mm) and new to turbos so I'm gonna be following you closely lol keep up the great work.

[@Neomustangs]

76/75 precision cea

[@mccranahan747]

You say on3 turbo but at dyno its a precision 76/75? Whats the deal

[@Neomustangs]

It’s an On3 kit with a different turbo

[@mccranahan747]

@@Neomustangs 10-4. Was just curious. Im thinking about an on3 setup 76mm journal bearing.

[@jakejaynes8617]

Have you had any issues with high manifold air temps on any of your turbo cars? I’m struggling to keep my temps below 140, going to try making a heat shield or rewrapping crossover. Just running out of ideas with this.

[@Neomustangs]

Yes. That’s backpressure. Aka backing up.

[@mccranahan747]

Do you run bias plys on the rear? I run micky Thompson bias ply et street r 26×10.5x15 at 20lbs with 4 in skinny radials up front and hook anywhere but a wet surface.im just shy of 500hp on stock block 302 HCI full exhauste no cats fuel system and vortech V3-si trim set for 10 lbs but only see 7 because the free flowing nature of my setup.

[@Neomustangs]

Nice

[@boostjunkieMike]

That's a good problem to have, "turbo's too small"😂🤣 is this your favorite setup? Seems like you really enjoy this one. Keep em coming, thanks for sharing.

[@Neomustangs]

Thx man.

[@joshuaarthur213]

Has anyone used the 67mm bb turbo from on3 is it worth upgraded when I order my turbo kit it will be for 95 cobra I will be doing a engine on a later date I just want to get it boosted first

[@Neomustangs]

I was going to vlog that on my dads car when I did go turbo

[@joshuaarthur213]

@@Neomustangs looking forward to see that I hope it is soon lol I am planing on getting my turbo set up for Xmas gift for my self

[@ryantaube6546]

Did you just say you can't drive this on the street

[@Neomustangs]

The white car ? Ya I can

[@bradpittman5075]

That turbo spools at like 1500 rpm lol. Keep chipping away at it bro! Hell of a car.

[@Neomustangs]

That's the plan! ANd yes.. you have secretly figured out our next topic for this car lol

[@frankenstanggarage7911]

Gonna be rowdy for sure!

[@Neomustangs]

Yes sir !