Is It Hard To Build Your Own Surron From Scratch??

[@OcAirsoft]

Thanks for linking this to me on FB.

[@tjwrongwaymead8374]

Very very nice . Can't wait to find the time. I think I'll do a kart when I go to the KO set up

[@telly903]

Crazy build. 🔥

[@Brixton_Z]

That’s dedication bro!! Another Bomb build 🔥 Love the video.

[@logan-taylor]

This is so sick! Also painting your fox 40 lowers was probably a good call, apparently powdercoating magnesium is super problematic. Nice build!

[@DanhRichardson]

I thought about Powder, but I woulda had to remove all the internals prior, and that didn’t sound appealing to me. Maybe my laziness was a good thing after all.

[@Overmotor]

Doing a build exactly like this (with a variation on parts ofc) and this video really helped with making sure I had everything! Gonna have a video of it on my channel in the next few weeks and it’s going to be black/red/carbon🙌🔥

[@DanhRichardson]

Very cool bro. I’ll sub to your channel to check it out 🤙🏽

[@Overmotor]

@@DanhRichardson legend! I’m sure you’ll like it :)

[@mcbrite]

2:03 As a German, I fully endorse this product, service and/or person!

[@DanhRichardson]

They’re awesome

[@mcbrite]

@@DanhRichardson I don't own a Knipex yet, but I will the second I need it for something! I have a Wera Joker 6004 XXL, it's also a beast! Not my video: kzbin.infojKgPYcoxsDE?feature=share

[@trousertrout3447]

dude that diy headset tool is genius

[@Dr_SP_sur-ron]

Sick build! Thanks for the shoot out 😘

[@DanhRichardson]

Here you go folks, if you need the swingarm or jackshaft spacer, this is the man.

[@Hobbies4Hire]

Great job on the video! Thanks for making it.

[@NemesisGrowz]

That is Fken dope respect 💯

[@arlie-averyasiuchannel3109]

Awesome build 👊🏼thats alot of work and research

[@willsmooth45]

You deserve soooo many more subscribers

[@DanhRichardson]

I really appreciate your words 😊

[@1UP_CYCLES]

Great build 👏 ,and very cool video

[@Bklynboyinpa]

Hi I’m also wanting to build one I have never had one can you do a full parts list or video would be awesome

[@km55111]

whered you get that seat? it looks great

[@iration2010]

Looks nice

[@idrivebmxbikesforfun]

Bro this is so cool and amazing that you built your own surron FROM SCRATCH! This really encourages to build my own surron because I have been saving up for years and thought about building it but I never knew how, is there anyway we can communicate and you can help me build my dream?

[@Fadeclippers]

Underrated

[@landonharris3585]

Can you make a video or maybe a series of what parts do what and what you do and don’t need I have been trying to figure out what all the stuff does I just don’t know what’s true and false and can’t find enough of the same answers

[@DanhRichardson]

What parts are you questioning?

[@landonharris3585]

@@DanhRichardson well one of them is the controller couldn’t find any confirmed answers on it

[@DanhRichardson]

@@landonharris3585 def need the controller. It’s the brains. Don’t have a question on any details of controller?

[@landonharris3585]

@@DanhRichardson no I just needed to know that because I had found a nice new one for 300

[@Ry6mx]

Nice video. I’m building pretty much a Surron but with a real dirtbike

[@DanhRichardson]

Awesome! Hope I gave you a little inspiration.

[@1sir-onworld]

🐝🏁 Great video 👍 very nice SUR-RON 👌🫵

[@ethanseiler1342]

I need one of those swing arm spacers but I can’t find the guy that you listed to connect.

[@DanhRichardson]

You should join the surron groups on fB. I tried to find you but couldn’t. Once you join, I can connect you to him.

[@ethanseiler1342]

@@DanhRichardson how do I join

[@DanhRichardson]

@@ethanseiler1342 Search for sur-Ron and Talaria Modders - Uncensored Then search for his name and message him. I will forward him your name

[@ethanseiler1342]

@@DanhRichardson I am already in the group

[@DanhRichardson]

@@ethanseiler1342 look up Simon poirier and message him

[@Overmotor]

Hey man, just coming back to the video and realised I dont have Pivot spacers. You say to contact "simon Poirier" for those parts but don't know where to contact him. Any info on how I can get in touch with him? Thanks!

[@DanhRichardson]

I found him through the Surron fb groups. facebook.com/groups/1285084232267247/

[@ekkRides]

Do you have any like old Surron parts because im building a Surron from the litteral ground up im wielding a frame ect but im not really at the spot right now to afford parts to buy the electronics and I was wondering if u could send me some parts? ❤❤❤

[@jmfmotorsports9722]

very nice

[@keyz_2205]

Great Build. Is there a list of all parts someone would need for a build like this?

[@DanhRichardson]

I have a 12 pg list but I can’t post it here. If you go to segronuniverse, they have a majority of stock parts.

[@iemo666]

yo that intro killed me, i am dead now

[@Chase.moto13]

For the headset shim use a socket and a mallet

[@WyattCarroll28]

the build is sick, how much did it cost for everything

[@bigkick86]

May I ask..where can I get replacement magnets for the motor?? Anyone, please and thank you!

[@connormonahan8194]

How can I get the pivot spacers, can’t find them anywhere and I don’t know how to contact Simon Poirier like you said

[@DanhRichardson]

You’d have to find him through the fB Surron groups. He doesn’t have a store.

[@dustinrossg]

What was the total cost?

[@K.Jones_wcc]

sick bro!!!!

[@jamesbaker448]

Would go watch a few videos about how to grease a bearing! They need a bit more grease or they’ll make all the noises

[@DanhRichardson]

Mahalo for the tip 👍🏽

[@Fictitious_Character]

Cool video. I'd have opted for some coats of clear on some of that paint. How has it held up on the frame and wheels?

[@DanhRichardson]

I did clear it with 2k. Paint has held up well. Of coarse it’s not resistant to chips like powder is.

[@_s4qib_773]

sick vid bro

[@jameshatton4211]

Great👍 Probably make the volume of your voice over a tad bit louder in post production so we can hear you clearly? Other than that, very good break down and demonstration. Enjoy your "new" Surron motard

[@DanhRichardson]

I really appreciate your feedback. I’ll adjust it better next one. 🤙🏽

[@jameshatton4211]

@@DanhRichardson show us some demonstration of you riding this new machine 😎

[@DanhRichardson]

@@jameshatton4211 I need to bring you in as an advisor before posting my vids 👌🏽

[@AKA_FORTY]

so this is exactly where im at, but minus 2 bikes and spare parts to start with, main question is did you get the frame from surronshop? and whats the rough estimate on total price at the end minus the parts laying around. at the moment, i think i can get a frame, controller and motor if bought separate for around 2500, then i have the rest to work out. loved the video though and am gonna check out the other builds now

[@DanhRichardson]

Frame was $1300 from Builtebikes.com I didn’t spend much. I already had the controller, fox 40, battery, motor, swingarm, hardware, and I bought a Ohlins rear for $500 which went on my other build and put the EXT on this bike. Also got a great deal on Dominions $400. Hardest part was finding specific spacers. Lmk if you have any other questions. I’m here to help.

[@gr1tzy]

in total how much would you think it would cost if you bought all pieces separate?@@DanhRichardson

[@DanhRichardson]

@@gr1tzy around $3200. That includes $400 dominion brakes and a bunch of prickly parts. I already had a stock motor, bac8000, subframe, chi battery, fork, shock, & swingarm.

[@allongold]

Hi what is the size of the tires and rim? Thx

[@DanhRichardson]

Rim is 16” x 2.5 Tire 16” x 3.0

[@ProMountainBiker]

Freeze the headset race and put the cup in the oven and they will slide together easily

[@DanhRichardson]

Ahh, great tip!

[@unrestrainedfamily9356]

You can just use a vice and a socket

[@DanhRichardson]

So put the socket in the cup and squeeze together. That makes sense. 👌🏽

[@mikemazzoli1990]

how much did this build end up costing you in the end? not counting your extra parts

[@DanhRichardson]

Around $3200

[@JonnyDuzzit]

KILLER BUILD! You on oahu?

[@DanhRichardson]

No I stay Maui

[@bryanspilner7370]

HOW DID YOU BUILD THE FRAME

[@DanhRichardson]

built a mold w/ clay, then poured in the unobtanium. Vòila!

[@mcbrite]

Why only grease the top bearing of the steering head bearings, not the bottom one?

[@DanhRichardson]

I actually caught that mistake a little after recording so I did grease the bottom. Nice catch. I was wondering if someone would see that

[@mcbrite]

@@DanhRichardson Thanks! I don't know enough about head bearings, so I figured that might be some special technique!

[@alexandracollins647]

How much did it cost all together

[@DanhRichardson]

3200, but I already had a controller, battery, fork, and motor

[@FlyingNimbuscloud]

hey what seat is that it looks very compfy

[@DanhRichardson]

It is super comfy. It’s one I got off eBay couple years ago. It’s wider than stock. I then got a custom cover where they put another layer of foam under. I don’t see it on eBay anymore.

[@FlyingNimbuscloud]

@@DanhRichardson oh wow..

[@FlyingNimbuscloud]

@DanhRichardson I would love to build a surron from scratch but I don't have a garage like yours at all and I've never done anything like it so I'd be afraid it would take me a solid year to figure out what all the parts are and build it. Plus I'd want to film it so I feel like I should just buy a stock surron and upgrade it and than one day build a used stock surron from all the parts

[@DanhRichardson]

That’s exactly what I ended up doing with all my extra parts. I figured I could just build a whole new bike. You’ll eventually have that same “problem” after building up your first Ron.

[@bentleyquance8514]

This is sick, I’m thinking about doing one of these completely from the ground up and I’m wondering what the pricing is for all of the parts, and also if you had any issues with the parts, thanks 🙏

[@DanhRichardson]

I already most of the major parts on hand from prior builds. I believe I spent $3200 once I decided to do the build. The hard to find parts are the ones I stated in the video and showed where I bought them. No real issues

[@bentleyquance8514]

Ok thank you 🙏

[@bb8only915]

Where did you buy your battery lid bolts ?

[@DanhRichardson]

Look up Chicago post screw M5. I don’t remember the length, but you can measure from your lid.

[@surron_sefi]

👌👌👌👌👌👌👌

[@AuditorsUnited]

you need a lath bruh you could have whipped up a tool in minutes

[@SteveOMotos]

That seat is gross LOL Nice bike though!

[@made4tankfight510]

i strongly advise you NOT to use mtb suspension, very maintenance sensitive and less durable and affordable than coil forks for motorbikes