Is it worth it or a waste of money?

Get 10% off Rhino Trade Insurance using code BUNDY10 at www.rhinotradeinsurance.com/quote
Ansell gloves i wear www.youtube.co...
Use code BUNDY25 at unilite.co.uk/... for 25% off
Use code BUNDY10 at www.expertelec... for 10% discount
Join this channel to get access to perks:
/ @nbundyelectrical
This video is for entertainment purposes only and is in no way intended as a guide or 'how to'.

[@NBundyElectrical]

unilite.co.uk/product/il-925r/?dynamo=bundy&ref=1345 £50 il925r

[@oyleyhands1332]

Fit the ladders the other way around... you have a flat, not angled surface or, if they are like my ladders, on the back of the aluminum rungs there is a vertical section, may have to space off the bracket with a couple of washers the thicness of the fibreglass.

[@LenscapeMedia]

Came here to say this

[@ColinRichardson]

10:10 hint when doing things like this, screw the holder to the wall, put the latch in the holder, put glue on the latches, push the ladders onto the latches They are now 'perfectly' placed.

[@splutss1]

Did you try turning the ladder round? So the front is facing towards the back. The front edge looks flat so better for those mounting clips.

[@ELVSystems]

For mounting the ladders using those mounts, fit the cleat to the ladder first. Connect the receiving part to the cleat, offer Chris to the door and screw. Normally Chris' are fitted to doors with a top hook or ledge, bungee across the bottom and two stops if your being posh.

[@alexkemp6165]

I did a similar thing for mounting stuff to my steps, but I used some steel all round band screwed to the top step...:) Works great, hangs drills, tape measures etc Ive got their battery mounts, As Tony the Tiger says, they're great!!

[@EdwardBretherton]

Nick turn the ladders around , fix the plates to the top of the steps, it should then slide on to the plates on the door

[@merlin5476]

The back of my Transit custom looks like I've rolled it. Sometimes i tidy & re position everything & check on stock, but after a week or 2 its back to square 1. I did make a false floor & slide my steps in underneath which is a god send, it saves so much space.

[@markrainford1219]

How it should be. If you can't find anything, nor can a thief.

[@SuperSamuals]

For the drums mount them in a case with a hole in the front to pull the cable out and a bar across the middle, then you can chop and change cables and what not and the cable stays relatively clean

[@TurboTimsWorld]

Nick as a MOT tester we are now having to have EV safety equipment in the workshop like a "pull the frying mechanic pole" and fire extinguisher with a 90' up funnel for shoving under vehicles and I saw those yellow gloves and I thought if we get an electric electricians van in they would be ideal for testing wearing them...well with winter coming at least a defrost on the window of an Artisvan would not burn so much ! xx

[@NicoleBritnell]

I loved the whole feel of this one Nick, the "trial and error channel" and especially the honest reaction at 10:40, which I actually laughed out loud at, re-wound and laughed at again. Keep doing you 👍

[@stevebrindley]

congratulations on 100K been here from the very start and happy to see you doing so well, work in stafford but still never seen you around, hopefully will have the chance soon enough to say Hi and have a look inside the Van ! serious van envy going on with yours ! just ordered the bosch stealth kits , for batteries and tools , look decent bits of kit and will help keep things neat and tidy in the workshop.

[@LenscapeMedia]

Move your van vaults to either side of the van then you can mount your drawer runners to the sides of the van vaults and have your new drawer in the middle

[@jonathanrose456]

Tip… Self-tappers:- Use some thread locker on them & they don’t come loose.

[@thewoodlandschoolltd3999]

Good storage = more time for you. More time for you = more time to make money. So good long term value.

[@jackrising6791]

Just a heads up with the gloves, your suppose to wear the leather ones over the top of the rubber ones! Keep smashing the content mate.

[@0liver0verson9]

Yeah, don't handle a live cable with only the outer leather gloves on. Could be a shocking experience!

[@jackrising6791]

😂😂

[@ofrimashiah2]

Wowww i absolutely love the tape measure clip. Best thing I've seen in a while 😊 so easy to use

[@dansparkyintraining]

God bless you Nick if you turned the ladder around the other way and fitted them on the black bit at the top right to the edge with a fixing it to the leg behind it 👊👊👊

[@imperia1999]

Handy little additions to the van to keep everything in its place, thanks for sharing

[@AndrewLumsden]

Some self-adhesive thick draft-excluder foam on the bottom of the ladder legs will stop it rattling!

[@badmiro]

Always love your videos. Keep up the great work👍

[@ethanstothard6015]

10:43 that face when u do something ur mum told u not to do and goes wrong like she said it would

[@ed-channel3986]

if the mounting parts on ladder were glued or screwed where the aluminium bar is, would work much better, now that it's sticking out on your ladder sides, will defo bother you on site

[@bsesin]

cheers nick , just ordered , ... free tape measure also.. nice deal.. thanks again....

[@Big_Old_Bondy]

Congrats on 100k mate. Top content! Edit: Just bought an IL-925R with your code. Thanks 🙌

[@robinhadley]

Why didnt you flip Chris round and put the mounts on the flat part of the step ?

[@Riley_Jarvis_the_sparky]

Got to love the big rubbers🤣

[@JensenPGATourDriven]

great Teacher Nick , we can learn from you , like the stealth mounts a great Idea , and I have just Ordered IL925R UNILITE Thanks ⚡️👊

[@richrowley8355]

Love organised. My shed is full of holders for everything

[@southcoastfarming]

Congrats on 100k 🎉

[@gards1988]

If you can give some feedback for those rubber gloves you'll want to have them possibly make the inside red so you can see if there is any damage to them.

[@calmeilles]

A steady cam would be good… right now I'm feeling seasick. 😀

[@pikeyandclaire]

Put the mounts on the front of step where it's flat.

[@Adam-Electrical]

What lights did you use in your van mate

[@timothyroper1897]

Mate great to see all the giveaway stuf But i am really waighting for the unitlite tape messure giveerway from weeeeks ago come on nic... please..

[@nicksimmons7234]

Congrats on making it to 100k

[@chrissharpe2106]

Less than a minute in and already thinking yellow might be the worst colour for those gloves.

[@fireblaster9961]

Straight in with a sponsor plug

[@nathanalsop5137]

@NBundyElectrical You was at a tool convention a while back and I think on the velocity stand you presented a sleeving dispenser. Did this ever come out? Thanks

[@andymc3875]

Just watching top gear on BBC3 and Nick pops up in the audience.

[@sosurko]

Gloves gotta grab a fly zapper 🤣🤣

[@siobhainmurray5674]

Anyone any idea when the milwaukee earpods will be available in UK plz

[@electricsh33p1]

Congrats on the 100k Nick! (Unless KZbin rounded up!)

[@jamiedillard866]

I have to use those gloves when i work on hybrid/electic cars, nightmare trying to undo the 10mm bolts with em.

[@carlclaude-vanmohamed680]

Oy Nick! Did you take a dig at Cody’s solar life? 😂😂😂.

[@maticdesigns2042]

Give away pile adding up nicely can’t wait for the give away video fingers crossed

[@stephenwillis9518]

I don't think they are the correct length for live work ? I could be wrong and I'm sure someone will correct me 😂

[@scott4shell]

Abrupt ending mate caught me off guard

[@supersparks9466]

You love mucking around in the unit, so would I if I had one. A bit jealous

[@jamieosullivan2527]

Just get 2 strops and put your ladders on the inside of the roof

[@RichardArblaster]

Great video dude, nice looking mounts 😎

[@MistaTerps]

Just need a Homer Simpson mask & you’re set 😂

[@delmclaughlin4612]

Have you a link for the mounts youve fitted to your bag??

[@ColinRichardson]

2:38 and a partridge in a pear tree?

[@davidpenn2518]

Always come in handy for doing the washing up..😆

[@robak1978]

Got question : did you try M18™ FORCE LOGIC™ HYDRAULIC KNOCKOUT PUNCH ? I think is great Can we have review please

[@seano452]

Beard on point by the way Bundy.

[@thomaskane8137]

If you think class 0 are sweaty, should try class 2 rubber gloves, by heck some heat gets trapped in them😂😂

[@andycavalier1920]

Congratulations on 100k

[@billywarwick6030]

I hope you have good locks😂

[@FLAWLESKILLER]

Love the way he says Milwocky

[@Liam_Hirst]

the front of the steps is flat

[@bobby449]

Your gonna have so much fun pulling Chris off 😜

[@jonathanrose456]

Aren’t marigolds VDE rated? Lol

[@davenoble7350]

Why not use the other side of the steps, looks flat from here.

[@gadgetman36]

There are much better solutions for hanging a ladder on plywood that don’t require fixing anything to the ladder, like two large hooks.

[@starburst2203]

click on the link in the pinned comment and don't put the bundy25 coupon code in

[@MichaelS133]

If you click the link in the pinned comment its £50 and you get a "free" tape measure and free shipping.

[@gadgetman36]

@@starburst2203 It's working now, but it wasn't when the video was first uploaded, with or without a code.

[@gadgetman36]

@@MichaelS133 It's working now, but it wasn't when the video was first uploaded, with or without a code.

[@AnxOG663]

In the U.S we all touch live cables all day everyday

[@AnxOG663]

Kinda stupid but we do

[@JorgeAMG187]

your little 110V is nothing little guy

[@AnxOG663]

We got plenty of other voltages that we deal with. But you know best, just ask you.

[@johncoe530]

Playtime in the bat cave (unit) 😂😂😂

[@davedrew9328]

Always good interesting videos.

[@HughEdwards]

Nick, bite the bullet, buy a Mercedes high top van, team up with Facom and get your van kitted out professionally!

[@maticdesigns2042]

Ngl the merc high top will be too much with the length of it parking it out getting in and out of properties will be a ball ache not to mention as a spark there’s no need for that big of van

[@RemedyDoesGaming]

The unit looks a mess so the van can be tidy lol

[@leonbarnes6428]

Anyone else disturbed by the way Nick pronounces Milwaukee???

[@joshplayspoor2908]

All of that Milwaukee gear should be mine surely, I am after all you're best subscriber even though I play with pipes not Eddie volts, surely it's gonna be me! 😂

[@raymondburke1261]

Bag pipes? …👍🏻

[@joshplayspoor2908]

Yeah if you say so

[@garycoxall4809]

Just get Adam to do it 😂

[@raymondburke1261]

Adams mum….👌👍🏻

[@williamyates2794]

What a waste of time 🤷🤷🤷🤷🤷

[@gregc7699]

Nice Marigolds 😂

[@paraicheneghan8934]

So the bucks full of Brits & Prices is no more

[@aaronmunden3069]

Stopped watching artisan for the reason you said. Only so many boring solar panel installs you can watch. Keep it up bundy u ledge

[@tilidie5272]

are you stoned or something? lol

[@jamiemurphy3404]

Waste

[@SarahJane148]

when are we going to meat Adam's mum

[@mrp7555]

How do I apply for giveaway