Is Rossi Magnum Country?

Rossi vs. Ruger and a critical fail with magnum loads.
Rossi's very entertaining trailer - Magnum Country • Magnum Country: The Re...
Music - Moonshine Town - JR Tundra - KZbin Audio Library
On Choice of a Defensive Firearm: Choose the firearm that meets YOUR defensive needs and is legal for your state or local jurisdiction. Just because I like revolvers for concealed carry doesn’t mean you have to too. Become your own best trainer.
You can contact Greg at [e-mail]
According to the Bible - we are to live at peace with all men as much as it is possible.
Personal defense of one’s self and of others is a last resort when there is no other option.
Self Defense Continuum - Avoid, Escape, De-escalate if possible, and if all else fails - RESIST
DISCLAIMER: All state and local laws were followed in making this video. Jeff Cooper’s rules of firearms safety were followed. Ear protection was worn. Firearms were cleared of ammunition when holding and exhibiting them.
These videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RESPONSIBILITY AND ACCOUNTABILITY. These videos are intended for lawful firearm owners who comply with federal, state, and municipal laws of the jurisdiction in which they live. Any opinions stated by the creator are the creator's alone and are not that of any representative body or of KZbin. KZbin and the creator are not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. The creator does not endorse any specific products and this video is not an attempt to sell you a good or service. The creator is not a firearm store and DOES NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. The creator DOES NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

[@LionquestFitness]

Wesley Mills had this same problem and posted a video on the fix. I didn't break open the gun this time, but sent it back to Rossi. Some of the problem has to do the internal machining and milling. Here is Wesley's video kzbin.info/www/bejne/romnmKeJh81gl8U

[@buffalosoutdoors]

Interesting. I haven't had any problems with my 6" yet but time will tell. Thank you.

[@LionquestFitness]

It is not like I haven't had issues with other new firearms and had to send them back. QC issues seem to be across the board these days. I'll see how Rossi handles this.

[@robwilson3749]

Well I knew it was going to happen sooner or later. Yours is the first video I've seen with one of these new 3" runs fail. I reallllyyyy want one too. Thanks for the video.

[@LionquestFitness]

We'll see if they make good on it. 😅 I just ordered a Rossi Lever Action to go with it

[@robwilson3749]

@@LionquestFitness Oh, I had meant to ask you but clearly forgot....those initial shots you made with the Ruger in the beginning that grouped so well? Were you shooting double action or single action?

[@LionquestFitness]

Always double action. I haven't shot single action in years. But, that Ruger GP100 has a very smooth trigger. Smoother than my SP101.@@robwilson3749

[@robwilson3749]

@@LionquestFitness Very nice.

[@wesleymills6542]

Greg, you can find my video on the Rossi RP63. I had the EXACT SAME issue after about 30 rounds. On the inside of the side plate there is a channel that the hammer disconnect rides in as you pull the trigger. That channel is so tight and not polished that the disconnect bar actually sticks, thus binding the trigger. I used a jewelers file and polished that out. Then I didn’t put much torque on the back side plate screw that’s under the grip. Since doing so, I’ve put 200 rounds through the firearm, zero issues. My Ruger GP100 has well over 2000 rounds with zero issues as well.

[@LionquestFitness]

Thanks for the tip!

[@wesleymills6542]

@@LionquestFitness No problem! I’m so glad you saw my comment. I was worried you’d send it back to Rossi when it’s such a simple fix. I’ll be posting a video on this issue now and how to fix it.

[@DanTheWolfman]

Dang hope they take care of you, make sure you tell them how confusing all the contradictory warranty info was, and to please register you as the OG owner for lifetime coverage?

[@richardevans7457]

My guess is the lighter Rossi has some increased recoil and caused one of the rounds to crimp jump locking the cylinder.

[@marcthomas2482]

That is a disappointment. I'm sure you'll find the problem and get it fixed up. I would feel more confident in the Ruger too.

[@LionquestFitness]

Well, Ruger has a proven track record, not that they haven't had their share of quality control issues over the years.

[@richardkluesek4301]

Standing down on my acquisition of an RP63 or even a 462, and like the rest of Greg's following, anticipating the diagnosis and remedy. In concurrence with other commenters, these small guns are really .38s chambered for .357 to have a desirable selling point feature, even .38+P and +P+ pushes the envelope limits. Any brand firearm can have one with an issue, Lucky Gunner had a GP100 Match Champion video about 1 that failed him a few years back but Ruger is still an unquestioned top dog.

[@terryschiller2625]

Greg hope they take care of the problem for you without issues. Please keep us informed of what the problem was.

[@kato1224]

The problem at Rossi is that whoever let this model go out like this needs to be fired.

[@jwgbmp40]

I have a 7 shot ruger gp 100 that would like up like that. I had to stone all the flat surfaces in the hammer/trigger group to fix it.

[@LionquestFitness]

I'm thinking its a similar issue.

[@marie-noellebaechler1433]

Thank you for this video. I'm sad to learn that Rossi revolvers still have teething problems. I hope that yours will be repaired quickly. And you have many excellent revolvers while you are waiting.

[@LionquestFitness]

Thank you Marie.

[@maxmoody3074]

Good thing it happened at the range and not in a self defense situation. I had the exact same thing happen with a Taurus model 669. I vowed to never carry it again. Even if you get it fixed, How could you ever trust to carry it for self defense?

[@LionquestFitness]

A lot depends on what actually is wrong with the gun. Also, that's why it's a good idea to test a gun at different distances and ammo before carrying it.

[@thebluesrockers]

@@LionquestFitness "Greg, I totally agree with your comment. My Taurus 856 had two out of thee FTF the first 3 rounds I shot. I used the 110gr (Not +P) Hornady Critical Defense. I upgraded my springs and have not had a single problem with FTF. I've shot a couple hundred rounds out of it since then. I also thought it was a little off target when I first got it, But after changing the grip to a Pachmayr Renegade smooth rosewood, (Much better grip IMO) I've been hitting the target much better. It's quite a bit thicker and my pinky has a solid home with the new grip. Been quite happy with it. But I sure wouldn't have been comfortable trying to carry it with that Hornady. But then again it could have just been a couple of bad rounds. I have no idea because it was my first time shooting it. Thanks for all your insightful video's. Peace.. Joe

[@LionquestFitness]

Thanks for your insights! @@thebluesrockers

[@maxmoody3074]

@@LionquestFitness Yes but if they replace the busted parts with the same type of parts, then???? Plus that is a fairly new revolver, made from "new" parts. My opinion only, but I could never trust it again.

[@michaelmccabe4725]

Hi Greg. I have been enjoying your videos for quite a while now. Have to say, I really like the intro music.

[@LionquestFitness]

I've probably over used it a lot, but it kind of fits getting egg on your face. Titled Moonshine Town, its by JR Tundra.

[@cleondubois1270]

Just found this Greg.....Revolvers are simple to operate compared to slide operated/magazine fed pistols. That is, until one observes their innards. Will be interesting to see what was the Rossi's "hitch in the git-a-long " .

[@LionquestFitness]

That is what I am wondering. I sent it off today on their dime. It appears to be a well made gun externally. But, we'll see. I'd been more upset if I had paid the money for a performance center Smith and it locked up, which I occasionally see reported with S&W and Ruger.

[@BOHEMIANHUNTINGCLUB]

Love the Rossi's! Good deal

[@terrybarnes0712]

Great Video Greg I will always be a Revolver Fan Want to Wish you and Your Family a blessed Merry Christmas From Kentucky

[@LionquestFitness]

The same to you Terry!

[@YellowHammer26]

👍👍Thanks Greg, hope you find the problem and get it fixed and hope you have a great day.

[@LionquestFitness]

You do the same Lance!

[@mcburcke]

Dang, hope it gets fixed quickly for ya. I have a 3" Rossi .357mag from a few years ago that has been just fine.

[@LionquestFitness]

I don't see why not. I'm starting the process tomorrow.

[@johndoee3850]

Me 2.

[@frankbutta9344]

Yikes! Not a good thing to happen. 😳😳😳 I’ve thought about getting a Taurus/Rossi revolver, but never do.

[@tomcarr4630]

A 3 inch GP100! What a fantastic find😀 Wonderful shooting, Greg.

[@LionquestFitness]

It's a great gun for aimed shooting, and very much a point and shoot gun at close quarters. I picked it up second hand a year ago, and am just getting around to figuring out the best carry ammo for it.

[@marciocumpiancumpian2075]

Boa noite meu amigo americano. Que triste isso, a Rossi,quando tinha sua fábrica,antes de ser comprada pela Taurus, era um espetáculo, minha primeira arma é um revólver Rossi,que comprei em 1993, tenho comigo até hoje, muito uso, quase nenhum desgaste, em calibre .38, uma pena não terem a mesma qualidade dos antigos. Espero que seja algo simples de resolver . Deus abençoe o Sr e sua família 🙏.🇧🇷🤝🇺🇲🙏🏼🙏🏼🙏🏼🙏🏼

[@LionquestFitness]

Obrigado meu amigo!

[@lessage760]

Thanks Greg great vidio been thinking about the Rossi guess I will wait hahahah hope all is well with you and the family have a great Christmas

[@LionquestFitness]

Hey Merry Christmas Les!

[@Steve-1955]

Ok I’m going to wait to buy until you find out what happened. Thank you for doing the research.

[@mallninjarising]

sad to see it, had much promise thank you for sharing your experiences

[@fbweaver63]

i about bought an older rossi .38 a few years back. it was beautiful. that sight doesn't look entirely straight. i'm sorry about the rossi. i hope taurus will fix it right. i see they haven't fixed issues with a couple of 605s.

[@LionquestFitness]

I don't know if the sight is warped or the channel was miscut, but that is one of the things I'll send it back for. It is fascinating to me that the longer I do this as a hobby, the more things you can run into as far as product defects.

[@joesheetstheragman7737]

Wow, great PSA. Thank you Sir.

[@LionquestFitness]

Well, no matter how much I like a gun initially, if there is a problem, I need to put it out there. If Rossi makes good on the fix, we'll see if it sticks around. I was still in the testing stage, so I'm taking a let's see attitude.

[@joesheetstheragman7737]

@@LionquestFitness stand-up stuff.

[@LionquestFitness]

Thanks Joe!@@joesheetstheragman7737

[@mikereese15]

And a beautiful ruger at that. My charter arms locked up like that once. Luckily the fixed it under warranty.

[@LionquestFitness]

It is probably going to be a simple fix. That GP100 is a beauty, isn't it?

[@erolkavlakverizon6112]

Greg, thank you for showing that revolvers can malfunction. I have several Taurus snub nose revolvers in .38 spl. And one in .357 mag. never a problem. I have (had, the wife says it is hers now) a Rossi SS snub nose in .38 spl. All were made before the lockdowns..and my Security-six 4inch is still perfect.

[@LionquestFitness]

That is why I range test with different ammos and different distances before carrying. As the old saying goes - make haste slowly.

[@walterminer4990]

Greg, I'm sorry about 3 comments but I observed something and I think you mentioned it awhile back. I.E. Regarding revolvers made pre China flu and post China flu. I REFUSE to buy a new revolver. I will get robbed on a pre China fly made revolver. The only revolver I haven't heard any gripes about is Kimber or Korth, and Korth is the priced about the cost a 7 Glock 19's! So I ain't buying them! Best to ya',,,,!

[@ThecrazyScotsman]

Putting their claims to the test nicely done hopefully that isn't screwed up too badly

[@LionquestFitness]

Definitely a disappointment, but we'll see.

[@joep4235]

I have shot almost 20k rounds between my 3" and 4" GP100's , (probably 80% of which were full magnum loads) and they are as tight now as when they were new !!!! They may not have the "celebrity" of S&W, but Ruger defines the term "workhorse"... thanks Greg !!

[@UncleDanBand64]

The first new handgun I bought was a Rossi 22lr. I bought it from Walmart back when they weren't WOKE! I still have it. Well Uncle Don has it but, I still own it. See I bought another one just like it. My youngest Son actually borrowed the second one and I ain't seen it since. At any rate I bought that first Rossi the day I turned 21. I just turned 59 Monday. The first revolver still works but, has a slight timing issue only on one hole though. Slow controlled fire no problem. Especially in Single Action. You really get to rapid firing in double action she will lead up the forcing cone and lock on you. Seems to be just on that one spot. Would I trust a Rossi in a hot 357 mag....no sir? If that little 22 was a 357 mag, it would not be safe. To be fair though, tens of thousands of rounds through her before she developed the issue. I trust my Rugers and Smiths with magnum loads. I have a Taurus that I trust with 22mags. I am interested in the Taurus 38 that is the size of the j frame that is 6 shot though.

[@walterminer4990]

Hi Greg! We are both longtime revolver guys. Is there chance you may have short stroked the trigger? It can happen. Hopefully it is something simple? Great presentation! Best to ya',,,,as always!

[@LionquestFitness]

I doubt it, the way the Rossi trigger breaks.

[@dangerman007]

One possibility for the lock up might be a loose cylinder crane screw... I had that happen to me on my 1968 S & W Model 10-5. I dropped it off at the gunsmiths and 4 months later (We NEED more of them) that's what the problem was. Try that first. Hopefully it's something easy peasy like that.

[@mrbottomfeeder]

Always the Best. 🔥🔥👍👍😎

[@Fudmottin]

That was a nice group with the GP100. I got a Charter Arms Bulldog a little while back. I haven't put any rounds through it yet and it already needs warranty work 😞

[@LionquestFitness]

Ouch!

[@theoriginalOSOK]

Well crap. I know how that feels - new gun and malfunction... Hopefully Rossi fixes that and gets it right back to you. The sights being off too... hmmm. Other reviews of these have been positive. Thanks for sharing, warts and all.

[@LionquestFitness]

I'd been more upset with a more expensive gun. The ball is in Rossi's court now.

[@sisleymichael]

I am rooting for Rossi. I never want to see a gun maker fail. Why? Manufacturers are constantly attacked politically via lawfare. We all suffer when they fail. My experiences with Ruger have been excellent in handguns over the years (no, I do not own any Ruger centerfire rifles, but do have a 10/22 I bought for my wife. She loves it. I am going to buy one for me to make a project gun.) Blackhawks, Super Blackhawks, Security Six's, SP101, GP100, all of them are just fine. Magnum loads? Not a problem, minus the smaller SP101, which functions fine with mags, but I do not with that smaller gun! A bit much recoil for ME in a small gun. I shoot +P in it and absolutely no issues, for me, or the firearm. Looking forward to the discovery of the issue, be it faulty part or whatever. I am not a revolver smith. I do know if timing on a wheel gun is off, you WILL have a bad day. Looking forward to an update!

[@LionquestFitness]

Thanks Michael!

[@EricDaMAJ]

Sorry to hear the Rossi isn’t measuring up. I hope you can find a fix. Some things are better to buy once, cry once.

[@LionquestFitness]

I'd be crying worse if it had been a high dollar QC issue.

[@Gumby56]

All 3 of my Brazilian revolvers are great.

[@LionquestFitness]

In general, I've had good luck with Taurus products, although I've noticed a decline in QC since Covid, but that has been all manufacturers.

[@locksbog4270]

Great show Greg, stick with the gp100 friend! 👍✌️😃🇺🇸💪

[@LionquestFitness]

It's not going anywhere. It is one of those guns you can pick up after not having shot it for awhile, and point and shoot or do aimed fire at a distance. It has become a favorite and is in the top four handguns I own.

[@logtownacres]

I had high hopes for the Rossi. I never expected it to be Ruger tough but I hoped for more than that.

[@LionquestFitness]

We'll see. They sent me a FedEx label to send back.

[@edwardpetty5401]

I heard that Rossi has come a long way in quality, especially in their lever guns. Sorry you are having problems with your revolver.

[@LionquestFitness]

Well, we'll see how Rossi does on this. I'd been more disappointed if I had bought a more expensive gun. LOL - I just put a Rossi Lever Action 92 on layaway.

[@fbweaver63]

rossi doesn't make the revolvers any more. taurus does. rossi sold that pert of their operation to taurus so they could focus on their lever guns.

[@LionquestFitness]

It's a bit tangled in who owns what. In one place I read they were still using the Rossi machines, but had demolished the old Rossi factory.@@fbweaver63

[@bluemouse5039]

If Rossi/Taurus revolvers are struggling to hold up shooting 357 magnum rounds, I wonder if their 44 magnum revolvers also have similar problems because the frames on their 44 magnums look a lot lighter than Smith or Ruger

[@LionquestFitness]

I don't know. I'm still waiting on the replacement Rossi is supposed to send me. I know Buffalo Outdoors has a six inch Rossi .357 and the .44 Tracker. So far he hasn't had any issues.

[@CarolinaRimfire]

Uh oh. Sorry to hear about the issue. I wonder what's going on... It seems like there are far more revolver QC issues now post-Covid. Maybe I'm crazy, but I feel like it didn't used to be this spotty with so many manufacturers.

[@LionquestFitness]

I agree on the Post-Covid manufacturing issues. I had an earlier Rossi .357 snub that I sold, because there were some slight manufacturing defects. This one looked much better and had a better action, so we'll see what kind of hiccup happened and what Rossi does on it.

[@CarolinaRimfire]

@@LionquestFitness Good luck with it! I hope they fix it for you. The new Rossis have many desirable features. If one of those features happens to be decent customer service, that'll be great news for us all.

[@walterminer4990]

One more point Greg I see questioning the brand in the comments already. Well, Hickok45 had a new Colt Python lock up on him! So time will tell! Best to ya',,,,!

[@LionquestFitness]

That's one reason I'm not skizzing out about it too much. I'll send it back and see if that takes care of the issue. But, the comparison was the video I had planned, so I went ahead and finished it and put it up. If I have a problem with a gun, it needs to be seen.

[@carlosmorris4510]

​@@LionquestFitness This is sad that this has happened... It could just be a QC issue - especially since it's a brand new model. And my thought is that perhaps it just needs to be polished up inside?... I have a few Tauruses myself, and fortunately they've been very reliable for me - especially my model 627 4" barrel Tracker (which I would recommend to anyone; very accurate - and with well over 1000 rounds through it now!). The cheaper Tauruses, in my experience, start out with a gritty trigger pull, that eventually smoothens out. The more expensive Raging Hunter line etc. seem to start with smooth triggers right out of the box (almost up to the level of a S&W 686, imo)... But yeah, I've never experienced anything like this (fortunately); hopefully it's just something minor and you'll get it back soon (or a new replacement)!

[@LionquestFitness]

Thanks for sharing. If I had a little more experience, I'd troubleshoot it myself, but we'll see what Rossi says.@@carlosmorris4510

[@carloparisi9945]

Hi Greg, sorry to see your gun locked up, is it possible that a piece of the cap blasted into the action? Nice shooting with the gp100, on the other hand!

[@LionquestFitness]

We'll find out. I'm interested to see what caused it.

[@tylermorrison7051]

If the stories are true, I hope your new Rossi won't be requiring a trip to Taurus' customer service department.

[@Jim-oo7dk]

Revolvers can be finicky. Shooting the Taurus Public Defender yesterday which has always functioned perfectly when it locks up. Thought it was dead in the water. Get it unstuck and it worked perfectly another 60 rounds. It was hanging up on one ,45 Colt reload case. Got a Charter Arms Undercover Lite that is useless in double action with anything but American Gunner Hollow Points, has a weak hammer drop in double. Got a Rock M206 that will have one lite primer strike per 100 shot. I think Kimber revolvers have a good reputation, for $1,200 dollars.

[@LionquestFitness]

They certainly can be at times. I've had revolvers hang up in the past, that needed oiling in the right spots or loctiting screws or cylinder plungers. The biggest problem I've run into though, has been misaligned barrels; especially with Big Blue, but, LOL, that's another story.

[@garageguy879]

No matter if the Rossi works well or not,,Ruger just flat out kicks a**.Can't say no more than that my friend.

[@LionquestFitness]

Now that is true!

[@shockwavedevice]

I had the same problem at the range with a rossi model 461. When the cylinder is open, that lockup is normal because of the notch on the hammer mechanism inside the gun. This notch is part of the hammer mechanism itself and cannot be removed and is normal to the guns function. When my 461 did the same thing as yours i diagnosed some possible reasons and i found that the main problem was that notch i was talking about is getting jammed by the cylinder release latch spring. My options were to remove that spring and let the cylinder release wiggle freely without the spring or take the spring out and polish it and slightly bend the spring into the frame so it doesnt get caught on that notch. If you take the spring out, im not too sure if it will affect the function of the lock hole on the back of the hammer mechanism itself but otherwise the gun will work fine without it for it being just a spring for the latch. I decided to keep mine in,polish, bend it and put a little super glue on the end of the spring that contacts the frame because taking it out will cause the latch to make noise as its free wiggling and thats annoying some times lol ever since i did that ive had zero malfunctions with the cylinder locking up. Just a notice that this jam might also keep you from opening up the cylinder to eject all those rounds so you have to turn the gun sideways and smack that cylinder out while holding the release latch in. ive done some work polishing and opening up the 461 model that im familiar with it,pretty much made my 461 as good if not better than a smith. Im not sure if the parts list is the same for the rp63 but from the looks of it its just the same its just aesthetically different with the sights and finish and trigger being flatter so the parts should be similar but i havent took one of the newer models apart to compare so take that with a grain of salt.

[@shockwavedevice]

this design with that release spring in the newer models might be different but in the 461 models you could just take the spring out uncaptured so im not to sure if the newer model is the same. i dont know if rossi knows the spring tolerances and tightness fit when it comes to this problem but i guess thats why the guns are budget friendly.

[@shockwavedevice]

I also forgot to mention the recoil of the gun is what moves the spring to jam into that notch locking up the gun so shooting 357 will increase the chance of this particular malfunction with this gun.

[@LionquestFitness]

This was what I was hoping to see, and that was some clues as to what was going on.@@shockwavedevice

[@Mowkade]

Do you have any new updates on your Rossi revolver i'm very interested in this. I had another question too, what is the finish like on this revolver is it just like the stainless steel finish on the Taurus lineup or is this a little bit more smooth I can't stand the Taurus stainless steel finish, it feels like sandpaper / Chalkboard

[@LionquestFitness]

It has been over two months and I've tried contacting Rossi this past week with limited success.

[@jackrabbit1379]

Do you prefer the 3 inch or 2 inch for conceal carry?

[@LionquestFitness]

Pocket carry - two inch. Belt carry - I prefer three inch.

[@50086gt]

Even though the Rossi is rated for .357, it’s not medium frame revolver and is not meant to shoot .357 a lot or shoot the hottest loads. It’s basically a j frame. I would never shoot underwood or buffalo bore .357 in one of those or in many other smaller revolvers. Those rounds are better for rifles and are loaded really hot usually

[@LionquestFitness]

True in some aspects, but in going over the manual, there is very little information on the limits of .357 rounds in the gun. It should be able to take a small amount of .357 pressured rounds for it to be labeled .357.

[@50086gt]

@@LionquestFitness if you compare the thickness of the metal around the barrel and the forcing cone of a medium frame .357 revolver(like a s&w 686 or Taurus model 66) compared to a Taurus 605 or that Rossi you will see that the Rossi and the 605 are more similar to .38 special +p revolvers. Yea they are chambered in .357 but they aren’t built tough enough for a steady diet of .357 or for hot .357 loads. It’s kind of false advertising. The only .357 snub in that class that is built to withstand that abuse is the sp101. Underwood and buffalo bore are known to load their ammunition at the maximum(not always but most often) for the pressures a gun can handle.

[@LionquestFitness]

False advertising? Ya think? But, I have to differ on the barrel and forcing cone difference on that Rossi, as well as the metallurgy, which is forged and just as thick as the SP101. A steady diet? No, but it should be able to shoot a limited amount.@@50086gt

[@50086gt]

@@LionquestFitness the sp101 is a very thick and heavy revolver. That Rossi is basically a fancy Taurus 605. I don’t think many people would agree that the sp101 isn’t built to withstand more abuse than the Rossi. It seems like you may be trying to be condescending but I’m simply telling you what many others have discovered with the Taurus 605 platform and .357 loads. It’s chambered in .357 but it doesn’t handle them as well as a gun that’s meant to shoot a lot of them. Gun Sam revolver aficionado has a video about this. The rossi is a variant of the 605 platform and shoot hot .357 through it is not a good idea. That’s not your fault, it’s a weak design

[@LionquestFitness]

The SP101 is made from cast steel, not forged. There is a difference in the tensile strength. The RP 63 weighs almost the same as as a three inch SP101. I have run hotter magnum loads through a 605, but not a steady or heavy diet thereof. The point of the video was to question Rossi's use of the magnum designation and marketing if the gun does not hold up, but that is yet to be seen as to what caused the binding. @@50086gt

[@guaporeturns9472]

Hey bud , ever do any deer hunting? A video would be nice

[@LionquestFitness]

A lot of whitetail around here. Probably when I can retire from my current job in 2025.

[@guaporeturns9472]

@@LionquestFitness Nice

[@3Pillers]

👍 well a revolver, any firearm, is a mechanical device and mechanical devices can malfunction. In layman’s language “sh&t happens”. Be prepared for the unexpected! GB

[@LionquestFitness]

Absolutely.

[@JackSmith-fj6sn]

Will you look and see what caused the problem. Was thinking i liked the Rossi from other reviews.

[@LionquestFitness]

I'm sending it back tomorrow. They sent me a shipping label. Being Christmas time I don't expect to find out anything until after the first of the year. So far Rossi has been very helpful.

[@kato1224]

The reason that you are hitting to the left is because this Rossi model has a ridiculous 50 pound trigger pull and the rear sight is so narrow and short that you cannot get a proper sight picture so until Rossi makes the corrections on this model I cannot recommend it.

[@LionquestFitness]

😅We've had this discussion before. Good to to see you my friend.

[@kato1224]

@@LionquestFitness I have to say that you are a true southern gentlemen that is why I watch you.

[@LionquestFitness]

@@kato1224 Thanks Kato!

[@davidgalloway6414]

Ooooops!

[@LionquestFitness]

Yep.

[@takumisato7126]

Disappointing, carrying my Rossi RP63 as I type this, hopefully its a fluke or easy fix, might have to return to my Glock or 3rd gen smith semi autos for carry again

[@LionquestFitness]

As far as I know, I'm the only one who has reported this problem with the new Rossi's. The main thing is proving it with different ammos and range time before carrying. I got it FED EXed today, and Rossi is footing the cost, so we'll see how it washes out.

[@takumisato7126]

@@LionquestFitness keep us updated!

[@LionquestFitness]

Will do.@@takumisato7126

[@HamiltonOutdoors]

That's a little disheartening to see your Rossi already having problems. I haven't got to shoot mine yet Hope it's not a lemon lol

[@LionquestFitness]

Externally, it looks like a very well made gun. However, as the saying goes with Taurus products, you often get a cherry, but sometimes a lemon.

[@thepossum8569]

I don't trust Rossi or Taurus revolvers. It just seems a matter of time until they fail. Sometimes you luck out, other times you don't. Not worth the cost savings.

[@jeffanon1772]

Totally agree 👍👍

[@Isaac_5.56x45]

I have never owned a Rossi or Taurus, but I must ask, when have you seen them fail? Is it commonplace or just a fluke? Because I have $500 rifles that have been vastly more reliable than $1k rifles, price isn't everything in my experience.

[@LionquestFitness]

Well, in contrast, I have a 605 and 856 that have been dependable for years. The 605 is my second favorite gun and the most carried. My favorite? A model 64 that had to go back to S&W with a crooked barrel.

[@jeffpaul8260]

I have a rossie snubbie from many years ago. It fires every time. I also have several tauri with zero issues. I also have rugers and smith's. My lower cost function just the same as the expensive boys do. That being said I won't be buying a new rossi or for that matter a new ruger or smith as I am set with what I have. Would love a 2.5 or 3 inch gp 100 but can't find one that is reasonably priced.

[@mikeseier4449]

I agree, I’ve had 3 Taurus revolvers and every one of them failed… Never again.