Is this the CHEAPEST 6X6 Army Truck in the WORLD?

In this video, I do a bit of work on this Military 6x6 International ACCO Truck to get it ready to sell. This ex army truck is now for sale for $900, and I will respond to interested parties in the order they email me on a first in, best dressed basis. It is riddled with issues like a rusted out cab and gears that are all but impossible to get (and some you can’t get at all). It has no brakes, not even a brake pedal, an old door hinge as a throttle and you have to be Hee-man to steer it. First and second gear are usable and the clutch seems ok. It won’t come with a battery or fuel tank, but if you bring your own, it does start off the button and the 6-354 Perkins diesel does run nicely. It can be driven onto a float for transport. The engine could be used in a conversion for another army truck or even in a tractor.
It is located approximately 3 hours north of Brisbane on the Queensland Coast. Thanks very much for watching. PS sorry about the bad sound, this video was made at a time we were getting storms and the cicadas were roaring in the trees which is why there is the terrible background noise.

[@nodaklojack]

If I ever get deathly ill and qualify for Make a Wish, it's gonna be to spend a couple hours with Bruce working on old diesels out in a paddock. Great chap and entertaining.

[@bruceinaus]

Thank you, your too kind

[@michaelsimpson9779]

It'd be very therapeutic.....

[@harrywalker968]

best gearbox oil, is trans fluid, & 500ml 85/140. trans fluid is exteeme pressure. transfers too,. used in fords & rally cars,, . not toyotas.. no guts..@@bruceinaus

[@911doogie]

what he said that Dad approach

[@graeme9679]

Thanks Bruce.The poor old Perkins must have wondered what happened when it felt all that new oil.

[@bruceinaus]

I think it would have enjoyed it that’s for sure

[@harrywalker968]

so your saying it doesnt have 2wd, neutral..it has to,,or the army wouldnt be able to turn them iether,,eh.. mate bought the 4x4 in 81, old logging truck. pt augusta.. to adelaide.. he ditched the 6 cyl. bolted right in no mods, a 318. being inter, dodge.. still had the centre winch, for front / back pull.. front shaft was ditched cos it wasnt needed or worn out..@@bruceinaus

[@harrywalker968]

bruce,, get yourself a diesel heater.. cost nothing..burns anything.. clean.. old engine oil..@@bruceinaus

[@harrywalker968]

motors fitted to ford f100 / 250,ect.. last ones were a phaser, turbo, just to get rid of them.. there still built so i found.. 4 cyl also.. i have an f250,2002, s.duty, 4.2tdi, mwm german diesel, truck built in brazil, engine under licence from germany, for tractors.. brilliant engine. owned 8 yrs, nothing. 14 lt 100. put a bigger turbo on it, as std had slight play.. now has 700nm. 240 hp.. no computer, no glow plugs.. aise.. lived in qld.. @@bruceinaus

[@joelpierce3940]

I like the calm, no drama way he goes about his task. He just perseveres.

[@picknikbasket]

I appreciate these longer videos from Bruce, so much better than the severely edited 10 minute total restoration ones.

[@bruceinaus]

Thank you, I always appreciate feedback. I was worried some videos might have been a bit long or slow for some people but it sounds like longer might be suitable.

[@mrjohhhnnnyyy5797]

​@@bruceinaus For guys with attention span larger than average, such videos are pure enjoyment

[@Jagermonsta]

@@bruceinaus i personally like the longer videos, especially with a beer or two

[@Watchyn_Yarwood]

Absolutely agree 100%! The longer the better. I'm 79 and have been involved in vehicle maintenance and repair in one form or another since I was 14. I always learn something new from Bruce! Oh, and I appreciate the methodical manner in which he goes about his work.

[@matrix54190]

I agree💯 with the comments here👍👍!!

[@liamdeerz]

Love this Aussie style of video, super interesting seeing these old trucks worked on by a bloke who knows his way around them 👍🏼

[@bruceinaus]

Thank you for your support

[@IdealGrain]

When we saw this uploaded last night my wife and I both exclaimed “Bruce!”. We love hearing your stories as you care for these old beasts. Cheers Bruce!

[@bruceinaus]

Thanks for both of your support

[@weburnitatbothends]

The old stories me too!

[@tomwichman77]

My wife and I discovered his videos a few days ago, and we have been binge watching😊! We love his calm approach, and his teaching moments... And the stories❤

[@ianburit3705]

Bruce, I`m a 76-year-old ex-engineer, but still love old stuff of all kinds. Your channel Is good for watching stuff, and full of life's little stories. I both enjoy and chuckle also. Don't stop, keep it up. your a great old guy indeed. About the 6pot Perkins, as I live right on the coast, boats are more likely fishing boats also use reliable Perkins sometimes. No good out there fishing If your motor won't start eh - lol.. OK weather, It has been blimin raining all day today here, but was sunny blue skies yesterday. Cheers Bruce - Ian UK.

[@lewiemcneely9143]

Whoever had Mr. Bruce for a wrench man had a GOOD one. i bet it was a hoot working for and around him. CHEERS!

[@bruceinaus]

Thank you for your kind comment

[@lewiemcneely9143]

I'm 73 and have always been involved in driving trucks or running equipment and usually both and have learned a LOT from half crazy wrench yankers. @@bruceinaus Nobody like them! Thanks for being one and a dandy at that! We would've had a wonderful time. I always gave my mechanics fits and them, me as well. It's been a GOOD life! CHEERS to you!

[@timlee4204]

Hi Bruce, you only need to release one injector pipe to bleed a DPA pump, the pumping elements rotate and service all 6 injectors in turn. That motor is running nice.

[@focomatic]

There is something incredibly relaxing and enjoyable about watching your thorough approach to every problem. Ripper!

[@bruceinaus]

Thank you

[@bullfrommull]

Thanks Bruce. Love your videos. Reminds me of good old days of true mechanics working on motors. You can tell a good mechanic by his rags.

[@bruceinaus]

Thank you

[@davidrobinson6353]

Bruce definitely knows his stuff ,brilliant channel to watch deserves million subscribers 🇬🇧👍🇬🇧👍🇬🇧👍👏👏👏

[@Chr.U.Cas1622]

Dear Mr. Bruce. 👍👌👏 2) 900 AUS$ is definitely not much. Even the scrap metal value seems higher. The Perkins Diesel engine alone is worth this kind of money. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and especially health to both of you.

[@bruceinaus]

Thank you for your support

[@phillipmonroy]

Excellent video Bruce! I enjoyed watching you take the time to clean the drain and fill plugs, and the oil filter housing. Not many people would take the time to do that. The Perkins sounds great after you bled the fuel system and secured the lines. Thank you! Phillip from Spokane Valley, Wa. U.S.A.

[@bruceinaus]

Thanks Phillip, I was always taught that if you are going to do a job, do it properly. The Perkins engine seems strong and they are known for their reliability. All the best.

[@Free_Ranger_CT110]

Enjoyable to spend time with a mate working on an old truck. 6.354 is a reliable old engine, I remember being sent for factory training on the 6.354 at Perkins, Peterborough, England as an apprentice back in 1981. Thanks, Bruce.

[@PilotMcbride]

Onya Bruce. Yeah, the old Accos were good fun, but my all time favourite was the old Stud. Back in the 70s the Army still had the 2 fuel fleet which included WWII Studs and every 12 months or so they needed some exercise. Use to drive old Austns, BMCs and blitz wagons on the farm in the 60s, always loved the crash boxes, as teens we’d drive them full of grain to the silos, no coppers out there 😂. But in the 70s I met the Stud and done my nuts 😂😂😂. LH drive, crazy shift and the “death wobbles” over 45mph. Who could ask for more. Great stuff champ, thanks for posting.

[@bruceinaus]

Hello PilotMcbride, thanks very much for your comment. All hard trucks to drive no doubt. This one certainly isn’t easy.

[@PilotMcbride]

I freaked my grandkids out driving them to school in my little manual and only use the clutch for starting and stopping (mostly) 😂 I feel sorry for the kids of today, I grew in SW NSW, MIA, and we had horse, tractor, angry roosters, around 10 shooting rabbits, riding the combine, driving grain trucks from about 12. Didn’t take long to double clutch because we got yelled out a lot 😂 Anyway, the old Studs, no indicators, LH drive, had a signal hand on the RH door with a long operating extension for the driver to indicate intentions by waving it like a lunatic then either indicate stop or RH turn 😂 5 speed crash box, 1st - far right & up (rarely used) 2nd - to driver & up 3rd - straight down 4th - short right & down 5th - straight up Built like a tank, go anywhere even if you didn’t need to go there, but the trip there was worth the drive 😂 Cheers pal

[@Andrew-so3vj]

ACCO = Australian Constructed Cab Over. An adventure camp I used to work at had a 4X4 for taking campers on a wild cross country run. Then they bought a 6x6 as well. Always loved seeing the chassis flex 15 or 20° as it motored over humps and through ditches. beaut steel! Not many trucks vould wade through 6ft 4inches of water like they could!

[@MikeBoomerGreg]

Recently found your channel, I find your videos relaxing if that makes sense. Something calming about watching you slog away at heavy equipment.

[@bruceinaus]

Thank you, glad you enjoy them.

[@Daydreaminginmono]

Its becoming a highlight of my day to watch bruce work on things, thanks guys!

[@bruceinaus]

Thank you

[@Al-vb6js]

I loved the story about the old garage when you were spare parts boy! That Perkins sound very much like the 6-354 turbos we had in our Commer RG11 milk tanker tractor units here in NZ - a familiar sound after 43 years!

[@MarkMunro-y8f]

Thank you for the video. I got a MF 35 diesel tractor last year. It sure can pull.❤

[@russellclement2058]

Loved the story's Bruce ,, yep in the 50 , 60 and 70's lots of towns had tractor dealerships like you spoke of .. I grew up in the Wallaville area ( Gin Gin ) , there were 2 workshops there in the day , now the road goes past ,, So many communities disappeared with time ,, and sadly I don't think for the better

[@niceguy391987]

Bruce has such an organic way of working

[@Manvrick]

Greetings from Southern California. Always enjoy some new content.

[@bruceinaus]

Greetings, thanks very much for

[@QuantumTime-pc9ts]

Great survivor of an past era, love to see them alive again.

[@nickolaskoukoutas3115]

Hi Bruce thankyou for all your time you are a true Gentlmen and a Scholar.

[@tygertyger8597]

Another great video Bruce. Everything you do reminds me of the days when I worked in my dad's junkyard. Oops, did I say junkyard? I meant to say previously owned, gently used parts yard. 😄

[@bruceinaus]

We used to call them wrecking yards here, and they had plenty of junk too 😅

[@zonie70]

Great to see you and Jax Bruce . I worked in Chev spares for over 40 years , started in 1971 . We only had catalogues in those days, it was different world ! Great channel Bruce ! Scott 🌵

[@bruceinaus]

Hi Scott, how’s it going, 40 years, you would have nearly been able to cite part numbers off the top of your head. Unfortunately the very experienced guys like you are hard to come across here. I did know one guy like that at Ford that had been there many, many years. Thanks again for watching. I almost didn’t post this one due to the cicada noise but on the balance of things, I’m glad I did.

[@zonie70]

@@bruceinaus Hi Bruce, I was gonna ask you about the buzzing. I thought it sounded like cicada's . I still remember many numbers that are for parts long gone now. I was surprised to see that all bungs were not over tightened on that truck. The last bloke did you a favour ! At the start of that video when you come rolling up in the Suzuki , Jax had a huge smile on his face , I had to chuckle out loud . Scott 🌵

[@mikemadison2747]

Man I love these old rigs. Well done, Sir.

[@lukarangel4288]

Hey Bruce! Love your long videos of saving old equipment! It really sparks my interest in older motors! Hope you keep posting more :) greetings from the Netherlands

[@electrolytics]

Thanks alot. Greetings from New York State, Western NY....not NYC. I just drive the trucks, I don't fix 'em. But I do know the value of keeping a friendly relationship with the mechanics in the shop. Your videos are great.

[@bruceinaus]

Thanks for that, greatly appreciate it. The funny thing is I am not a truck driver, only a fixer, so it probably evens out! all the best, Bruce

[@FixAndForget]

Love Bruce's attention to detail and outstanding quality of work. Thanks for the excellent videos!

[@bruceinaus]

Thanks very much

[@chrisbow1776]

That's brilliant, I was amazed how good it sounded considering the bodywork. Hopefully, it is restored to its former glory.

[@WM2869]

Great to see these old trucks going again. Great channel and content keep up the good work.

[@geraldharkness8830]

love your vids bruce,i left school here in the uk went into a fordson dealer parts dept and had a very similar experience! brought back a lot of good memories.

[@mjm7187]

Great video Bruce! Enjoy all your contributions, hope you're having as much fun keeping these going as well as we enjoy watching you work. Cheers from MI,USA.

[@adventureswithmichael6589]

I always enjoy watching your videos bruce. It's great to see old equipment breathing a bit life, looking forward to seeing your next video!!

[@ironmantooltime]

New videos from Bruce and CEE Engineering, happy days 😎

[@bruceinaus]

Thank you

[@gordonagent7037]

Hey Bruce, good to see you back old mate and breathing life into old iron. Loved the yarn mate, a good parts man was worth his weight in gold and some of them knew exactly what to get and where to get it from. I reckon there would be a few towns like the one you mentioned, I had my farm in Turallin, it was supposed to be the big town in our area but the train went to millmerran and that was the end of the line, so Turallin became pretty quiet. That old engine sounds really strong and with love could be a real good runner again, I think your theory was spot on. Looking forward to getting on the road again with you for more adventures.

[@j4techmediajishnusreedharst]

You are really hardworking and dedication to cold start 😍😍😍

[@aussiemotorsportmick]

Great video Bruce, my son and I regularly watch your videos in Sydney. We liked hearing your story about working in the old tractor dealership, thanks👍

[@bruceinaus]

Thanks for the kind words and hopefully you are both enjoying them

[@donaldhalls2189]

Nice old rig, thanks for sharing, all the best to you and your loved ones

[@glengrant3884]

GREAT SHOW BRUCE!!💥💪 YOU'RE THE BOSS!!💥👊

[@bruceinaus]

Thanks very much Glen

[@5678niall]

Great video it's great to see someone with so much knowledge share it. I am sure all the viewers are into heritage so please share more stories too ❤

[@BillNorquay]

I was the quality control manager at the International truck factory at Dandenong when the last one was made in 1974. They never had Perkins engines the had the International AGD282 petrol engine with twin carburettors. They cost a fortune as they had to be the same as the original ones made ten years before and much of the old tooling had been scrapped. Also the Army inspection made life hell for us

[@frankcoggan3880]

I bought one of these ACCO brand new when they first came out, they came from the factory with the Perkins 6354 ( in New Zealand ; you could also get the six cylinder petrol engine ) mine burnt burnt oil from day one,and had the rotary fuel pump. At ten thousand miles Harvesters put new rings and bearings to try and stop the oil consumption .

[@ExplosiveKaboom]

glad to see you back bruce. been watching your videos lately. much love from the USA

[@bruceinaus]

Thanks very much. It’s been a slow start to 2024 due to bad weather. The next month or so may stay hot and wet but I should be able to get back into it after that.

[@nelashharinarain3394]

Excellent video. Thanks for sharing Bruce

[@garnetbowcott6742]

Great channel Bruce, love the series on the 6x6 military tanker. It's really cool to see the cabovers too, I miss my old one, not too many on the roads these days here in Canada. You keep saying how hot it is there, I'd gladly trade you, it was -18 this morning, but felt like -27, with the wind chill. Keep up the great work, always look forward to a new video from you. Take care Garnet

[@bruceinaus]

Thanks very much Garnet, we usually live in the perfect climate here, not too hot, not too cold but this year has been the exception. I don't know how you could work in -18!

[@stevehall8981]

Hi Bruce.Interesting video as usual,thankyou. You are right about the heat and rain.Im in Hervey Bay and never known it to be so humid!

[@bruceinaus]

Morning Steve, I agree with you, it hasn’t been anywhere near this bad in recent years

[@metricstormtrooper]

Bruce, I really enjoy your videos, you're a legend mate.👍

[@bruceinaus]

Thank you, a few more in the pipeline for this year. Hopefully without the cicadas next time.

[@metricstormtrooper]

​@@bruceinauscicadas just add to the atmosphere, and we don't get them here in Tassie, they remind me of our time at Tumut caravan park.

[@tylerderouchie5220]

Love the content Bruce! Im from a rural area in the states and like to tinker on old iron too. Enjoyed your story about the old SAME dealership. There's a few around where I live still, they're some good workhorses!

[@bruceinaus]

Thanks very much, we don’t see many of them here anymore, but you might come across the odd one at a farm here or there

[@Dannyshouseofcards]

Excellent video, keep up the great work. It is awesome to see these old things start up and your knowledge to get them going.

[@bruceinaus]

Thank you

[@stendecstretcher5678]

Another top video from a top bloke.

[@bruceinaus]

Thank you for your kind words. I almost didn’t post this one as I was worried about the cicada sound so your support is appreciated

[@ewanstewart8011]

Your method is very thorough and methodical which for me makes great viewing cheers Bruce 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🏻

[@darrenpuls4693]

One of your best mate, I watch everything you put and it helps me through the shit I am going through in my life at the moment, love you heaps

[@troelse.nrmlle4625]

Thank you Bruce, we enjoy your work.

[@freddking4389]

Thanks Bruce. Great video.

[@stu8200]

Mrs bruce will go mental when she sees what you done to her pink towel 😂

[@JP5isalive]

Addictive content Bruce! This truck sounds awesome

[@rodneymiddleton9624]

It has arm strong steering like my 1947 GM Greyhound bus that has a Detroit 6-71. Sounds great! Thanks!

[@bruceinaus]

The bus sounds like a classic. Thanks for the comment

[@bruceinaus]

You probably already know but there’s a channel called the bus grease monkey, I think you might enjoy him

[@brettjones5041]

Cheers Mates Keep Hydrated . love the old acco. your very metidious in your mechanics good job

[@MickyOliver]

Good Job, Mr. Bruce! [ Brazil ]

[@kerrygleeson4409]

Another great video Bruce thanks for sharing 🦘

[@bruceinaus]

Thanks Kerry

[@matrix54190]

Haven't seen you in awhile?? Nice that you're back👍👍!! It seems to be a very reliable old diesel engine😉🤔? Hope to see you soon. Greetings to down under from👋🥖🇫🇷 Peter

[@bruceinaus]

Thanks very much Peter, had a bit of a break over Xmas due to weather and other commitments but slowly getting back into it now. Many would say that these old Perkins are one of the most reliable engines made of that era. Hope your doing well

[@PiazzaWoodWorks]

Great vid Bruce, Could you do a video telling us what you used to do for a living? I’m sure I speak for everyone when we say we would love to hear your story!

[@terrywombat4856]

Butter Box ACCO'S bring back memories, alas they were not fond one's. More like nightmares

[@bruceinaus]

Not nice to drive or work on are they

[@johnchristian5211]

With agitators running around NQ in the 70s

[@johnlease2369]

Cool old truck, I worked on Oshkosh 6x6s back in the day. Tuff old girls. And hello from Wisconsin USA.

[@georgecranney4088]

Great video Bruce I had 4 same tractors in my time your right in hot they were to work on. Regards George

[@billwood2914]

Thanks, Bruce. I always enjoy your videos and agree that longer videos are better. Cheers from Southern California.

[@williammccartney4833]

I see you use the left handed metric adjustable spanner wrench like they say across the pond!.

[@bruceinaus]

Yes lol

[@PeterShaw-lb9lt]

We actually call them shifting spanners shortened to a shifter in aussie mechanic talk

[@AndyL940]

Gloves are for prostrate examination. We used to mix engine oil and diesel 50/50 and pump a few litres through when something was sitting for years . You wouldn’t own a petrol motor for quids eh !

[@bruceinaus]

Thanks Andy

[@frankd3024]

Fit for the next Dakar Rally, I think. Greetings from Germany, Lower Saxony. Thank you and good luck!

[@bruceinaus]

Hello! Thanks for your positivity but the cab might seperate from the body if it attempted Dakar 😂

[@hensleyshobbies-doug7761]

Bruce, you got some skills on those old Diesel engines, love seeing someone getting those old rigs going and back on the road again! KUTGW mate 🤙🏻✌🏻, that old Perkins diesel kinda sounds and reminds me of the old 50’s 5 ton cargo truck with the continental gas engine, the ones we had at my National Guard unit the big 6 cylinder continental engines were setup to burn the cheap low octane unleaded fuel, called MOGAS, the damn things ran pretty good on that old cheap stuff though but to me they sounded kinda like the old Perkins diesel. Some of those old 6 cylinder continental engines ran pretty good, a couple of those 5 ton trucks we had, you get them out on the highway and they would about 62-64 mph and they were governed, most of the other trucks we had wouldn’t run about 55-56 mph and downhill too.

[@bruceinaus]

Thanks very much, I’d hate to be trying to hold any of these old things on the road at 65mph!

[@hensleyshobbies-doug7761]

@@bruceinaus - no problem mate, you're mighty welcomed! Haha, yeah, true true, that would scare the be-jesus out of anyone to do that but at least their going again, that's the main thing, right? And whoever gets any of those old machines could take the engine or drive train out of them and put it in something a little better or something?? Take care Bruce and keep on wrenching 🤘🤙✌️

[@johnhall235]

Thanks for another great video Mr Bruce!

[@bruceinaus]

Thanks John

[@badasssamurai4954]

Love watching you use the big nut rounders 🤣 Seen people crucify people for using them! If it works, use it! Great job Bruce. Hastings Michigan here.

[@huntersharpe1700]

Superb work once again hope nothing but the best for y’all ! Watching from usa east coast

[@bruceinaus]

Thanks very much

[@drummingriffin]

Nice one Bruce, I really enjoyed that. The old Perkins sounds really good. Cheers mate, take care. Norm.

[@erickvond6825]

Bloomin heck, that thing is rusty as. I've see Swiss cheese with less holes. Good on you for bringing the old girl back to life.

[@brendoncullen2540]

Bruce, you have so much knowledge! KZbin isn’t enough, you need to teach classes as the wealth of knowledge can’t be lost….

[@kululv]

Hi Bruce, I'm always fascinated about how meticulous you are! And I apreciate that there is no fuss, just good knowledge. Please give your camera man a name instead of just calling him camera man...

[@airmailman1971]

I learn something on every video you produce. Thanks.

[@charlesangell_bulmtl]

Well right tidy, BTW, I found the cicadas & lush green quite enjoyable...😇 After listening to your boyhood story ... I'd reckon those 6.354 are 'old hat' for you👍 Quite reasonable, that's a good core price in the US for the 6.354 alone...

[@vargr]

I bought a US Army 5ton, paid $1 American, bought it for parts, the owners said no one could fix it. Cost me the price of an inline fuse no one bothered to replace it get it running. Now I have a 5ton to pickup plywood or deliver cabinets. I had wanted the rear axel.

[@tonyhallinan7695]

You’re an amazing bloke I hope one day I may meet you keep up the great work 👍

[@bruceinaus]

Thank you for the kind words

[@tonyfreeman5048]

That old engine sure sounds good. Very good video would love to have a truck like that

[@Mercmad]

nearly 40 years ago,in another country not too far from Qld, i was a Saw mill engineer. We had a 6x6 ACCO which saw double duty as a general cartage unit and a cement mixer(!) by swapping the tray or agi unit. It too had a 6-354 but we added a second gear box towards the rear to give it a few more ratios .The mill covered around 200 acers with little roads everywhere for the BM volvos etc . One day one of the young mill hands was tasked to drive it down the back so it could be parked under the sawdust chute. He was moving a bit fast and the oil bath cleaner fell off dumping oil in the intake. Luckily one of the other blokes had enough nouce to block the intake with a rag and a block of wood before it revved higher and created more smoke. Hard to Drive? the bloke who drove it the most was a well known Rugby league player of the Old school. 😂😂.I saw a vid here on YT a few years back showing the mill as it is today,having been shut down because of government over regulation. The main mill building had been burned down by Vandal's but the ACCO was still there in the back ground!.

[@bruceinaus]

Thanks very much for this mercmad, I think many of us on here have been involved in industries that have changed greatly due to regulation. I could also see how someone like the rugby league player is the right bloke to drive a truck like this!

[@roybm3124]

Amazing video, was looking forward to this!

[@bruceinaus]

Thank you

[@bbrut3332]

Darn Bruce, your are a jack of all things mechanized. Just found your channel and subscribed. Old guy from East Texas 😂😂

[@NoblePineapples]

I like the Bruce the astronaut comment, that is funny. I love a good pair of goggles though, no need to worry.

[@mischef18]

Being stainless and having CIP tubing on the top it looks to be an old milk tanker trailer bro with that type of lid. Great video by the way. Safe travels. Ken.

[@bruceinaus]

Hello Ken, I agree with you that it would have been milk. Thanks again for your support.

[@bernardcowcill8482]

Love the video and the story of your working life keep it up proper man

[@bruceinaus]

Thanks very much

[@nicholasrodgers4360]

Quality viewing Bruce 👏

[@bruceinaus]

Thank you, sorry about the sound

[@anaussiedashcamnchat3059]

G'day Bruce. Nice videos mate. Just subscribed. Look forward of what's to come. Cheers Evan from Bairnsdale Vic.

[@jeffdayman8183]

That one wanted to go again Bruce! Nice job on the startup. That steering will lighten right up once you get to about 120 kph... oh wait... 8^) Really liked the video, thanks for sharing it. Cheers!

[@bradheath6079]

Bruce is the kind of bloke you need around in the zombie apocalypse…..he’ll see ya through safely I reckon. 😁👍

[@911doogie]

Bruce you legend, check out this guy I follow in the USA, his name is Bruce Wilson, young fella making a name for himself. Doing what you are doing at the start of his channel, he has a passion for old trucks and machinery. Love what you are doing, buy you a beer one day. cheers

[@Tokey_The_Bear]

Wow that old girl runs good! Tough old perkins.

[@madswillum6763]

We love you Bruce!!!

[@bruceinaus]

Thank you

[@bigerch85]

Be watching this with a couple of tinnies tonight. Cheers from Scotland Bruce.

[@bruceinaus]

Thanks very much, sorry about the sound on this one

[@BobMohr-se4dc]

Great job Bruce keep up the good work!