Is Using No Antennas on Your Goggles Actually Better? -

[@TEXASUAVSOURCE]

Sweet under the bridge shot

[@apachesmokewoundedsniper]

10-07-2024 Hello you beautiful GG and Master Ciotti how are you all doing? 00:01:44 On this stream…… 00:06:22 Keep supporting Ciotti. 00:11:09 serious question I was wondering, can you actually blindly tell the difference in Kv, not so much 5in rigs but TinyWhoops I would like to see a blind test live on stream 00:15:03 I'm building my first 2g4 aio on a cockroach 65 frame. HM2600KV motors, Ant Lite, I made a custom vtx antenna, check general nonsense for pic. Can you say where I solder plug wires from cam. 00:17:00 Interesting question. Is the optimal whoop weight 0 grams? when does it get to a point where it starts feeling too light? what point do you think that is? can you give a guess? 00:18:12 Should I print Mcstinky in hard plastic or in tpu? 00:20:20 the FC is labeled, the camera is not. 00:20:59 Now that I've buttered you up, it's time for me to start flying outdoors, I'm thinking the Mobula 8 and sticking with analog. What whoop would you buy or build for your first outdoor drone 00:23:04 Is using no antenna’s on you goggles actually better? Let’s test it. 00:38:58 What are your rapid fire settings? 00:40:13 At our club we have been advising people run no antennas for over a year 00:40:45 Your opinion? is it better toe power down vtx? 00:41:40 I'm unwinding SE0702 26kkv's right now and finally got one unwound without breaking or having to cut the wire, They are 8-8-7. I haven't measured the wire size yet. FPV 0702's are way harder to work with since they are TINY. 00:44:06 at x:38 starts 3 of us saying 1 antenna is better but no one tagged you. 00:44:40 Back to check if it is better with or without antenna on your goggles 00:46:02 Hey brother I ordered the mob6 neon green black canopy from pyro... confused about what motors I’m actually getting. chose race 25000kv pic showed 702 26000???? am I missing something 00:58:01 The venue you fly at, does it have Wi-Fi access? 00:58:15 Can't get 2 other people with the same receiver and record the same feed with 3 dvr? 01:00:27 There was definitely some in between clicks also and you also were calling the same trash rolling through multiple times. 01:01:23 There's an ai out there that cleans up analog really well but it costs. 01:01:38 Why not do the testing now on stream? 01:03:20 thinking my next build will be a tooth fairy 2 with 3.5” arms and 16mm motors on 4s…thoughts? 01:03:42 can u recommend a good 1003 for a 2 inch toothpick 2s. 01:04:50 Flight test with one antenna on. 01:06:20 Flight test with no antenna. 01:09:00 Flight test 2 with no antenna. 01:10:45 Flight test 2 with one antenna on. 01:16:37 I came across someone on reddit claiming they could run the RCinpower 1002 22000kv motors on 2s with zero motor limit and the motors weren’t even warm. Like 30A draw lol 01:17:09 I'm not being a dick. I've offered flat out support throughout the night including helping the conversation of "is using no antennas actually better?" 01:19:45 Checking the vtx power settings. 01:20:36 Wait a minute can't you burn out the vtx by running no antenna. 01:21:37 I was running no ants on my hdo2 and the sma's got really hot after like 10 min 01:22:06 RX only no antenna needed... Walksnail dji would since they tx as well as rx 01:24:05 Testing Walksnail high frames. 01:34:48 Isn’t the update to be able to run 100fps at 1080? 01:39:15 I thought you mentioned the crappy antenna was still pretty good and worth stripping down. 01:39:35 I got my 35mm HDZero build down to 25g dry with 0702 40,000kv and bi blades. 01:42:14 Switching to 1080 on Walksnail. With Teddy. 01:45:05 I’m confused, hasn’t it always been 120fps at 720 and 60 at 1080. So if you can’t go to high frame rate at 1080 then nothing has actually changed, no? 01:47:18 Doing a blind test for us 🤣😂 01:51:09 3.5V? I run until 3.35V is that okay too? 01:54:30 2g4 is soldered to my ant lite camera. plug in power, video scan on goggles show strongest signal on R2, lower signal on 2 adj bands. no matter which I select I get scrolling video 01:55:20 In a blind test, you'll definitely know what frame rate it's in if you’re doing quick moves. if you were to just cruse around you might not notice. 01:55:31 Oscar Liang page say v1 goggles can do 90 at 1080 01:56:26 What’s it going to take to get you to come to BC Canada mid Sept for the freestyle micro event I am hosting? Stay safe everyone and have fun flying. 01:38:56 Do you have the heatsink on your vtx?

[@prottentogo]

0:57 I'm curious: how does storing the antennas loose prevent sma wearoff? I'd guess the most stressful part for it is the actual fastening, so it should wear it off just as well? I'm going back and forth on what should be best: say running two short omnis that stay on all the time versus a short and a long waterhead one that wears the connector out. The sma on my old skyzone I did this to for 3 years look like shit. I tried putting a straight sma adapter in between, but even the straight ones seem to alter the signal quite a bit. Patch antennas doesn't seem to make sense for Stevie Wonder pilots and I also have a hunch that rapidfire has a harder time combining from different type of antennas, but idk for sure.

[@CiottiFPV]

@@prottentogo wishful thinking really, I actually need to take a close look at my long Singularities to see if they’re wearing down

[@kd9432]

Ive noticed less muti-pathing with one Antena b4

[@scole901]

wont no antennas burn out the goggles

[@Halphbaked210]

Transmission without antenna bad..... receiving without antenna not so bad

[@Tokyo_Dom]

Walksnail always had 100fps high framerate (you might be thinking of hdzero). But for the 1080p mode you can tell the detail difference in daytime, but the difference is minimal in lower light with high iso. 60 vs 100fps is mainly noticeable on the stuttering image (much smoother). I'm pretty confident I could tell the difference between resolutions and frame rates without even considering latency

[@CiottiFPV]

Holy shit you're right, just looked back at a stream from a month ago and the latency was down at 21... Sigh...

[@markwilliams5654]

As if you haven't got a 3d printer 😮