Step by step process to remove dash. If you made it this far, check these out while the dash is out: • IS300 STICKY DASH - CL... sticky dash • IS300 DASH INSTALL Dash Install
Пікірлер: 26
@anthonytorres17962 жыл бұрын
God Bless you wherever you are this make my project so much easier
@GreenEyesAnthony3 ай бұрын
Awesome video bro, thank you!
@mateuszkaczmarczyk36454 жыл бұрын
You are a saint, my friend.
@scorpiolexx2 жыл бұрын
Good job. I'm planning to take my dash out also...but I'll be wrapping it because when it was in car I blew up my job with wrapping and I gotta make it up
@maaraar7394 Жыл бұрын
Thank you so much for the great details
@isaacking921 Жыл бұрын
Very helpful
@shlinky3000 Жыл бұрын
allen or hex? i grabbed my allen wrenches but it looks like you have a hex in hand and mid way through taking this out
@Godsent7773 жыл бұрын
Best way to take out the wheel is to just smack the sides
@rumbleauto3 жыл бұрын
Rubber mallet works like a charm, and has never let me down.
@rc28ify2 жыл бұрын
Thnk you, i have the sticky dash issue also
@deathproofduck68973 жыл бұрын
Thanks for the upload. Could you remove the dash without taking the steering wheel off?
@guardianracing90733 жыл бұрын
I've tried. You gonna have to twist the dash a lot and pull from the passenger side. If you are having issues getting that nut off the steering wheel, you could lower the steering column. There are (4) 12mm bolts/nuts that the steering column is attached to the large cross bar. That may give you more room
@rumbleauto3 жыл бұрын
@@guardianracing9073 - another trick to remove the steering wheel is to give it a couple solid whacks with a rubber mallet before you take the large 19mm nut. It works every time!
@josh-nx7wm2 жыл бұрын
@@guardianracing9073 It may be hard, but is it definitely possible?
@burtblair7795 Жыл бұрын
I prefer the lowering of the steering column myself. No reason to mess with the clock spring and airbag. And if you're removing the dash for any other reason (heater core/evap) you're just one step ahead when you have to remove the crash bar.
@failureexpected49893 жыл бұрын
Bro get some bags for those parts, how are you staying organized?
@deriakt3 жыл бұрын
LOL. Yea, I normally do when it comes to engine rebuilds.. I put everything in order in the garage. There really isn't that many bolts, and most are obvious where they go. Almost impossible to mix up.
@the_visionvry62443 жыл бұрын
ive taken my bezel around my tachometer off without removing the steering wheel. why was the steering wheel removed?
@guardianracing90733 жыл бұрын
I was taking the dash out. Not just the bezel.
@jankim38362 жыл бұрын
thank you, sir!
@Steve132112 жыл бұрын
Great Video!!!
@IS3000vato2 жыл бұрын
How long did this take you to do? I want to commit to a day, but will it really be a full day?