【ISDT】ESC70 Menu guide

More question in QA
→“ www.isdt.co/esc70-faq.html ”

[@MisterGank]

Thank you for this. It was much needed.

[@owlbruno]

Tolles Video,, Danke,, 😎👍

[@donaldsneffe]

PWM frequency is kHz and not Hz!

[@rccarsandmusic2641]

Active brake force works with these settings, pwm 10khz, brake force 5, active brake force 10, active brake force enable.

[@stephanevaucelles6378]

Hello, and thank you for this tutorial, I have a ftx fury crawler with MI-NH battery and 20T brushed motor, is the esc compatible with this configuration of my crawler

[@renbarturbo]

another new problem i have 2 of these esc now and can’t get them to link up with my app neither one will link i’ve tried reinstalling the app i’ve tried changing the button but nothing works i’m getting frustrated with this now i think it’s the app not working properly

[@cfusername]

In the manual it says explicitly, that one header is for the switch and the other for the receiver. On the device itself are no markings, therefore both appear to be interchangeable. Does it matter where I plug in which or not?

[@TrokaRC]

Just ordered one, lets see how it goes...

[@GuyonaMoose]

newest update i cannot calibrate throttle. only once for the first time without switch. after that nothing all 3 of mine same. very great ideas but also very buggy and glitchy. i hope it gets better, looking forward to updates :) it has very, very nice control and adjustability.

[@jmvilla6966]

How to hard reset? After updating firmware my switch stopped emitting light prompts and now it is not connecting even to my radio. Pls help!

[@VDVC-RC]

Brushless version coming soon I hope!

[@user-mizusilo]

ブラシレス版もほしい

[@kayespea2264]

Will this esc handle 12T motor?

[@gladysthegoat5505]

What do I do when the switch stops working?

[@NCMOUNTAINSbackyardRC]

👌💯👍

[@daniela1483]

I have problem with connection, always is failed

[@MangoJim90]

Same. When I first bought it the connection was fine, I set up all I need in app and after 3 months I decided to change some settings and I can't connect to this esc nor from app nor Bluetooth 😶

[@khairulhasif8640]

​@@MangoJim90same goes to me

[@renbarturbo]

new problem the switch led has stopped working it will turn on and off but i cannot set any parameters or reset the esc i’m starting to really think this is not worth the hassle and maybe i should have brought a hobby wing 1080 now i’m stuck with no crawler for god knows how long

[@renbarturbo]

after over a hour or so of trying it still won’t work no light on switch and bluetooth app can’t find the esc it’s as if the bluetooth is disabled or nonexistent car works fine it’s just cannot be reset or fine tuned again leaving it useless will wait for you reply but i think in all honesty it’s going back for a refund or replacement or a 1080

[@isdt7812]

​@@renbarturbo please contact the seller to replace the switch.

[@renbarturbo]

@@isdt7812 i have there not interested asked me to contact isdt

[@renbarturbo]

@@isdt7812 ok seller is going to be sending me a new switch but my question is how long will that work i’m starting to think you should be able to buy the switch separately because if it goes again it’s going to be replaced with a hobby wing 1080 or axe setup which is a real shame because i see this has a great place in our hobby it has real potential

[@renbarturbo]

@@isdt7812 still no replacement switch very poor service such a shame my esc is junk now have done what i should have done in the first place and brought a hobby wing 1080 sorry but i wouldn’t recommend this esc as i’ve not been able to really use it as intended got a crawler gathering dust

[@renbarturbo]

great esc but when i remove battery for storage i have to recalibrate esc every time it comes up with errors and drag brake will not work

[@isdt7812]

Restore factory settings.

[@renbarturbo]

@@isdt7812 yeah i’ve done that still no real drag brake it’s just on off on off and jumpy everything else is spot on

[@isdt7812]

hi, we want to confirm options below to troubleshoot the cause: Is your running mode be set as "forward and reverse"? Are there still comes up with errors after the reset? Is the switch off or is the switch on but with no drag brake? Thanks in advance.

[@renbarturbo]

@@isdt7812 hi it’s ok now when i disconnect the battery i don’t have to reset anymore it’s just i have no drag brake it’s set as forward reverse

[@isdt7812]

Does "no drag brake" means shaking and vibration? If so, you can try reducing the drag brake level. Too high level of drag brake may cause motor vibration.

[@independentmind1977]

Esc90 fails to update firmware. Tried several times. What a waste

[@nguyenuchoancamerazino3059]

Why can't I contact isdt via email?

[@isdt7812]

Could you provide your email and issue？

[@nguyenuchoancamerazino3059]

I hope isdt will contact you soon and solve the problem for me

[@teddygee1613]

Total dissapointment. Esc wont calibrate,app wont pair can isdt help fix this *$,"?

[@khairulhasif8640]

This is rubbish.. Update firmware 100% and nothing is happen.. Cannot connect to Bluetooth arggghhh.. Please save your money

[@jonenglish6617]

Absolute POS I bought it plugged it in it doesn't work . Save your money and buy a 1080