It will make your bicycle faster. Maintenance of the bike hub

Hello cyclists. In this video lesson, I will show you a useful secret to make your bike faster.
Do everything as I have shown in the video and your bike will ride much better.
Bicycle wheel hub maintenance is important!
00:00 Maintenance of the bicycle hub.
00:37 How to disassemble a bicycle front hub.
01:34 What's inside a bicycle hub.
02:15 Cleaning the components of the bicycle hub.
02:42 Cleaning the bicycle hub.
03:44 How to wash the bearings of a bicycle hub.
04:31 How to properly assemble a bicycle front hub.
04:52 How to grease a bicycle wheel hub.
06:08 Lubricating and assembling the second side of the bicycle hub.
07:14 How to fix and adjust the bike hub.
07:57 Good job. now the bike will go faster and easier.
If you liked this video,
share this video with your friends ❤️
It will help the development of the channel! 📈
Ask your questions in the comments 👇
❓ ✍ 👇

[@GoodBicycle]

❤ help the channel get better! 🚀 share this video with your friends ❓ ask your questions

[@dashofawesome64]

Use some rings as spacers with the quick release. You notice it will be to tight. Make it loose just a little bit and when the quick release is set its butter smooth. Best for long life.

[@GoodBicycle]

If I understand you correctly, you wanted to say what is shown in this video? kzbin.info/www/bejne/enbGgoKcepppa7s

[@RuiSilvaPT]

This really improves the longevity of the bike! Maintenance is key for this, I've been doing this for quite some time, and my old 26 bike was based upon this cup and cone style, very easy to maintain, in my opinion the only highly important step is when you adjust the radial gap/tolerance of the bearings on the cup and cone. Nice job, but I one question, that really pickled me, and it is not the first time I see people do it and don't know why or what they are using, let me get to the point. What solvent are you using? For the looks of it, it appears to be alcohol because it struggles hard to dilute the old grease, alcohol is good to dissolve polar base materials and that's why you have to work twice as hard to clean the parts (ball bearings and other parts) and thus struggle to dissolve the grease when cleaning it @ 3:49. I would advise you to use a proper thinner such as cellulose thinner, it cleans everything very nicely and the solvent works for you. Try it, and give some feedback afterwards. Cheers!

[@GoodBicycle]

liquid - isopropanol))) thank you for your comment! Share this video with your friends, it will help the development of the channel! 📈😘

[@tcrwild8422]

Real nice video . nice work like the close up shots also.. Been working on some road wheels last couple days thumbs are sore now haha .. I have several wheel sets mostly 700c road and cx stuff. Wheels can be fun but lots of time involved i build all my own bikes enjoy it and this is also the only way you get exactly what you want. Frame. Components . wheels. Crankset etc the tools are not to expensive if you just buy them little by little guys.

[@GoodBicycle]

thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘

[@tadi78]

Where is the cat? 😉😃 just kidding😋 great video as always! Thank you!

[@GoodBicycle]

the cat works on my first channel )))) this is channel №2, subscribe)))))

[@tadi78]

@@GoodBicycle I'm subscribed to both! thanks for your work on both, and for the cat on the first 😄

[@GoodBicycle]

❤️❤️❤️✊

[@alfredoalonsocachon589]

Donde comprar conos y tapas.

[@GoodBicycle]

Buscar en tiendas en línea o mercados chinos

[@michelsaint-germain97.1]

On peut faire comment si on a pas la même pièce en bois que vous?

[@GoodBicycle]

Vous pouvez alors utiliser deux barres ou boîtes, les placer l'une près de l'autre, en laissant un espace sous l'axe du moyeu, et placer la roue sur ces barres ou boîtes. Pour faire tourner la roue, il suffit de la tenir avec les doigts, et non avec une cale.

[@gbart981]

Except by using a magnet to grab the bearings, you've magnetized the balls making them little metal particle magnets. Skip the magnets, folks!

[@GoodBicycle]

those fine particles will be there anyway. I don't see what the big deal is.

[@antoniiocaluso1071]

haaaaa...if ONLY Easton wheel hubs weren't so diabolically-designed that...I can't figure HOW to even remove the hub's cover plates! Dang....

[@GoodBicycle]

thank you for your comment! 😘

[@reason1]

What kind of grease is used in this video?

[@GoodBicycle]

shimano

[@reason1]

@@GoodBicycle wow, Gracias~~~!!

[@GoodBicycle]

si te gustó este vídeo, comparte este vídeo con tus amigos ❤️ ¡Ayudará al desarrollo del canal! 📈

[@rafalvreuls7677]

Kan ik nie

[@GoodBicycle]

Waarom ?

[@corcodelmarian]

How many balls have rx 500 shimano hub on each side,please?

[@GoodBicycle]

Perhaps you meant FH-TX500? It has 9 balls per side

[@corcodelmarian]

@@GoodBicycle Thanks.

[@GoodBicycle]

😉

[@tiromancino_tt]

coni e calotte rovinate, inutile pulire e ingrassare ! Cambiare coni e calotte

[@GoodBicycle]

il cliente ha rifiutato la sostituzione

[@psclassy1123]

It’s true but the average person would spend too much on tools and may fail. Take it to a shop.

[@GoodBicycle]

thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘

[@GoodBicycle]

*Ask your questions in the comments* 👇 ❓ ✍ 👇

[@jeandeudon9531]

Pour refait roue arriver de vtt disques

[@GoodBicycle]

👌