Its Paint Time - Kapci Coatings 2k Direct gloss - Bare Metal Re-Spray on A Classic Mini - PT5

Hi Guys, in this video we will be taking a look at spraying wet on wet primer, panel preparation and also spraying the topcoat in the form of Kapci Coatings 2k Direct gloss
SP SUPPLIES DISCOUNT CODE - TONY5
THE KAPCI RANGE AT SP SUPPLIES
spsupplies.co....
Join this channel to get access to perks:
/ @tonysrefinishingtv
OUR SPONSORS
spsupplies.co.uk/
[e-mail]
/ spsuppliesltd
/ spsuppliesltd
SPRAY PAINTERS NETWORK GROUP
/ 185301786214280
If you have any questions feel free to ask away and as in any video i will do my best to answer you all.
I hope you guys enjoy and don't forget to like and subscribe
Business and Collaboration / Sponsor Enquiries
[e-mail]
Social media Enquiries
/ tonys_refin. .
or like our Facebook page
/ tonysrefinis. .
/ tonys_refinish
#passion4paint

[@TonysRefinishingTV]

hope you all enjoy this weeks video only took three attempts to upload this lol

[@Ari2k8]

Very good videos your like a brutish version of the gunman! Genuine question what’s the reason you don’t wet the floor? I find it I didn’t wet mine I would have dust issues?

[@TonysRefinishingTV]

The few times I have I’ve always accidentally flicked water off the floor onto the car so instead before I roll the car in the booth i airline the floor off into the filters with the booth running to get rid of as much excess dust as I can mate

[@workmix5896]

I've been using Kapci for a while. How much thinners did you opt for?

[@TonysRefinishingTV]

I used 20% for this. It il probably go 25-30 next time to test it mate

[@wakko0hakko]

@@TonysRefinishingTV I was worries about that. Last time I was spraying I poured water on the floor and swept it around.. so no pudding or anything large enough that could be flicked up.

[@mikefrost7516]

Another great video! Cheers mate. I'm in the process of getting my MGB GT Sebring ready for paint. I've done all the work on the car myself, including the V8 engine swap and really wanted to do everything on the car myself if possible, but the paint was an area I was really worried about. I found your videos at the end of last year and have been binge watching like crazy. The detail you go into and how you show all of the steps in the process is awesome and really given me the courage to go for it and do it myself. This Mini series is awesome and it's been perfect for helping me know all the details needed, so just a huge thank you from me!!

[@TonysRefinishingTV]

Hi Mike such kind words there mate and sounds like an awesome project you’ve got on the go too , hope the videos have helped you somewhat with your project mate and really hope it turns out nice for you

[@philtucker1224]

Whenever is see such a fabulous paint job on a lovely classic mini I always think it’s helping to hold them together 😁

[@SuperWestie01]

A wonderful example of a fastidious and highly skilled preparation resulting in a beautiful finish, thank you for producing a great video series.

[@TonysRefinishingTV]

Abs Thankyou for joining us and your kind words david

[@wakko0hakko]

Again .. loving this series. These fully detailed videos are amazing for a newbie like me. Thanks.

[@TonysRefinishingTV]

Glad you like them!

[@PHARRAWAY]

That looks awesome nice work

[@TonysRefinishingTV]

Thanks fella just waiting to watch yours shortly when my computer catches up lol

[@joelpalmer]

Congratulations! Your videos are every bit as professional as your work. Superb!

[@TonysRefinishingTV]

Thanks Joel

[@arnierock9558]

Thank you for a very detailed explanation I have been in the trade for thirty years and retired enjoy watching your talented videos keep them coming

[@TonysRefinishingTV]

Your very welcome mate

[@jamesfreeland3137]

Wow. Great job. First time I see it like that. Thanks for showing.

[@tstuart7333]

Super informative video. The Mini is looking really good and the colour suits well. Maybe even better than factory finish. Thanks for sharing.

[@TonysRefinishingTV]

Thanks stuart and your welcome mate , as for finish we always do our best

[@garypollentine194]

Nice blue mate when I had my own mini I did it lime green with white roof watching you do that mini brought back good memories a good job as always mate could you do me a favour tell your viewers to make sure they put a good mask on every time they spray or sand even if its just for a min im on a nebulizer now my lungs are shot its with the isosionates in the old paint I used to use I think I told you about it before take care of your health mate we only get one pair of lungs keep them in good order you take care buddy

[@TonysRefinishingTV]

Sorry to hear that man and hope your as well as you can be mate esp at this time of year fella stay safe buddy and il pass that on mate

[@brianhull5125]

I’m just a diy’er and used to love watching your channel and was hoping for a training session but then covid ruined everything and I stopped painting but now I’m keen to start again so it’s so nice to see you up and running and still doing well

[@TonysRefinishingTV]

Hey brian and thanks mate , it’s hard mate atm in paying off huge losses from during the covid time atm and working through a big backlog too so long hours and a lot of stress to deal with but if we can push through it’ll be a lot better after it’s been tough buddy but tough people last tough times don’t

[@brianhull5125]

@@TonysRefinishingTV bless you Tony, you’ll be okay, especially with your daughter as an apprentice…you will come out of it stronger. I just wish I had your knowledge 30 years ago and I’d have had a successful business like yourself….you have a lot to offer and you do some cracking work…so you will succeed…hey, if you need a 53 year old apprentice I know a very keen person who would fit the bill 😋

[@TonysRefinishingTV]

Haha thanks man and I really appreciate that mate it’s been hard as we just hit that sweet spot of getting on our feet as a new business then covid hit a few months later and it was like going back to square one again lol but we did it once il dam sure do it again

[@MURDOCK1500]

I used Kapci 2K DG for the first time last year on a Cortina respray. I was really impressed with it. It's just like 2K DG used to be. Being able to thin it 30% makes it go a long way and flows out well too. You don't want modern peel on a classic. The gloss doesn't drop either

[@TonysRefinishingTV]

yeah its great stuff real thick good bake and keeps its gun finish

[@MURDOCK1500]

@@TonysRefinishingTV The solvent BC is good too. Really thick. I can colour up a front wing with just 10th of a litre thinned 50-50

[@TonysRefinishingTV]

Yeah I’ve just done a whole bonnet in it today with 250ml mental

[@philtucker1224]

Minis are one of those respray jobs where your “practice panel” is often bigger than the actual car 🤣😂

[@lawncuttingplusdelta]

I’m impressed how nice the paint lays out … I’m old school , I like single stage :)

[@TonysRefinishingTV]

Thanks Paul and I love base and clear but single stage definitely has its place

[@malcsurfleet3888]

Amazing job I would not be mad on the shade of the blue ,but the paint job looks fantastic.

[@TonysRefinishingTV]

Thanks Malc

[@vettemaniac2237]

The master strikes again!!!

[@TonysRefinishingTV]

Lol thanks buddy

[@falconx5744]

Looks great Tony 👍 Thanks for the video. I am restoring a Mini Clubman here in Australia and been looking at different colours, i like this blue looks great!

[@TonysRefinishingTV]

Thanks bud and yeah it’s Ral 5010 just incase you need it mate

[@falconx5744]

@@TonysRefinishingTV Thanks heaps mate your a gentlemen. Love your work, im a mechanic but i have been restoring cars here in Australia for many years and do all the work at home so i paint my cars in 1k acrylic, alot of work rubbing back and polishing, i get a beautiful flat finish and only reason is here in oz its ilegal to paint 2k at home but this time around im going to do my mini in a booth and 2k, im getting to old with all the extra labour of 1k acrylic, plus 2k is so much nicer finish. Thanks again Tony for your experience you share.

[@TonysRefinishingTV]

No problem at all man and thanks for the kind words fella hope your project goes well mate

[@supercomp7078]

The more detail the better, makes it more entertaining for some of us and more educational, nothing worse than just watching some random guy doing something random without telling us what and why, does my head in.

[@TonysRefinishingTV]

Thanks mate I try my best to put as much in as I can it’s not always easy but I always try my best for viewers as you say it’s no good just a random video without informational content for you too

[@jimlong527]

The paint looks great, very impressed love the color as well. Great looking Mini.

[@TonysRefinishingTV]

Glad you like it

[@stevenwithanS]

That looks really good. Beautiful color. I'll be using a blue like that with the red and white on my '66 American.

[@TonysRefinishingTV]

Thanks buddy and that sounds cool

[@seasonedtoker]

It is oddly satisfying throwing base coat on a primed surface. You are starting to see what you actually got there in all its glory

[@TonysRefinishingTV]

100% mate definitely

[@Mikefngarage]

Hey I got some of that Kapci clear flows like glass. easy to spray. The only thing I found is that it likes when you use a clear blender underneath on a blend panel. So like a intercoat clear under it keeps it from fisheye. otherwise it does some strange stuff when over sanded clear. I used Universal clear blend panel then painted the base over that which eliminates the sand scratches on the blend. WORKED FANTASTIC....sprayed it to perfect gloss very little cut and buff.

[@TonysRefinishingTV]

Thanks for sharing

[@sandocheese45]

Great job Tony as always. Came out fantastic 👏👏👍👍👍👍

[@TonysRefinishingTV]

Thanks buddy

[@GeorgeEI7KO]

Nice job Tony. Was glad to see you weighing in with the offer on project issac on the workshops channel.

[@TonysRefinishingTV]

Hey buddy thanks man and yeah I like matts content man esp the dell vids lol they cheer me up after a long day so only happy to help give him a little something back

[@GeorgeEI7KO]

@@TonysRefinishingTV kudos dude

[@recreativesigns4571]

Another awesome video and well narrated throughout. Looking forward to the next one.

[@TonysRefinishingTV]

Thanks man

[@darrengroves9]

Another great job and video, I'm loving that Walcom gun, it's a real pleasure to paint with... 👍

[@TonysRefinishingTV]

Yeah they are very nice to use mate

[@grahambooth-mr3eq]

I always mix 2_1_1 with kapci TE20 beautiful glass finish

[@richyalebon1758]

The lay down on that kapci looks great dare I say as good as some of the novol jobs I've seen on other channels 👍

[@TonysRefinishingTV]

It’s good stuff mate just not very well known buddy but you’ll be seeing a lot more of it in the future I think now

[@DETAILINGLAW]

Another good job Tony. I’m very interested in the mini paint system so will get in touch with you for further information. Mini is looking really nice 👍

[@TonysRefinishingTV]

Thanks man and il add a link to the video later for you when I’m home mate if you like

[@adamwhite3278]

Great series, Tony. I’m respraying a 63 MGB at the moment, so this was really helpful.

[@TonysRefinishingTV]

Your welcome Adam and hope your mg project goes well mate

[@carlfrizell2849]

I am in the process of restoring a 65 Morris Oxford and I am going to respray it, I am looking forward to doing it with trepidation, its going to be redone in her original colours which is a cream roof with a sage green body.

[@TonysRefinishingTV]

Oh nice mate sounds like a fun little project you have on there hope it all goes well for you

[@cameronboling8495]

Beautiful!!!

[@johnclark1925]

Learning a lot from your videos. Many thanks.

[@simonattard7392]

Great series with this mini Personally I would love to see more of this step bye step work And even one of your jobs in even more deft hon one of these jobs . Learning a lot from you tony keep the content coming mate 👍

[@TonysRefinishingTV]

Thanks Simon and once I’ve got the workload down abit this next month or so mate I’ll be allt more focused on in depth content mate

[@peterpedro9386]

Im from South Africa (Cape Town) and Kapsi may be one of the cheaper brands by you guys... But by us its quite expensive and we that use it can tell its a good product once you get to use it very often.

[@TonysRefinishingTV]

100% agree about the quality bud and yes over here it’s one of the middle range but not very well known brands

[@larrysullivan6536]

That came out spot on really well done and really well explained he is so good at painting he move s so quick but steady great job well done buddy cheers Larrysullivan bin London

[@TonysRefinishingTV]

Thanks Larry Appreciate the kind words

[@Beardmondy67]

.. Ace work there, Tony,.. Lovin' the vids,.. Keep-up the good work mate ,.. Greetings from Wimbledon,.. Cheers , Dan,..

[@kimojoseph8057]

Big one Tony although it’s a small car lol 😂 and that walcom pumping on that paint wonderful factory finish haha 🤣 much love Tony and I enjoyed that video too see step by step on this one enjoy your afternoon Tony 🙏🙏🙏🙏🤙🤙🤙👍👍👍👍👏👏👏💯💯💯💯💯🤙🤙🤙🤙🤙🤙

[@TonysRefinishingTV]

Thanks kimo and hope your well mate

[@philmahoney6656]

Hey Tony what a great video. I'm just about to paint my classic mini in Australia so I may have faster flash Off i think it's called due to the heat. You certainly did a nice job there. I need my confidence mixing the paint, hardners etc but will take that up with my auto paint store. Again really nice job and video.

[@TonysRefinishingTV]

Good luck!

[@antonyjames744]

Fantastic video..what a superb colour and finish

[@TonysRefinishingTV]

Thanks

[@gregandkatecox2612]

you make achieving perfection look easy

[@TonysRefinishingTV]

Lol 20+ years of throwing paint on mate that’s all

[@tonyneedham548]

Hi Tony watching your videos realy helpfull could you tell me if you would use the direct gloss on my mg or is there any problems that may occur would it be quicker and cheaper or would you recommend base and clear thanks and keep up with the videos regards

[@deanbrown7643]

That new paint range sure is nice just imagine the finish you can get when you hit that sweet spot cool vid Tony thanks for uploading 👏👏👏

[@TonysRefinishingTV]

Thanks buddy and yeah using it on this job as a first use and getting those results made my mind up as you say that was day one imagine after a month

[@deanbrown7643]

@@TonysRefinishingTV a month in and those jobs sure will be sweet money all the way ££££££££

[@TonysRefinishingTV]

It’ll be a lot better mate profitability wise for sure bud and just time saved having it all in house too

[@deanbrown7643]

@@TonysRefinishingTV made up for ya bud last yr was a bit naff for ya onwards and upwards keep em comming mate thankyou

[@TonysRefinishingTV]

Still is tbh mate but I’m getting closer to getting there atm just a few long months left to push through then I can relax abit

[@donkintz281]

Alot of hard work!! Looks awesome 👌 👏

[@TonysRefinishingTV]

Thanks don

[@davidseymour4631]

Hi just started watching your channel really good .I used a kapci lacquer to re spray a jaguar xk 150 a couple years ago must admit I was doubtful about it but it turned out looking very good I’ve never used since but after watching your channel I now no we’re to get it from cheers

[@PnwOnTour]

Tony always delivers to his clients that car looks killer 🔪

[@TonysRefinishingTV]

We always try our best mate

[@MiniMattTV]

It looks fantastic! Quality job

[@TonysRefinishingTV]

Thanks Matt

[@carlheath1814]

Nice job tony 👍, i got rid of my lesonal scheme as i too found it over priced and not without its faults either

[@TonysRefinishingTV]

See I’ve had no issues with it but it’s just massively priced now so it’s time for a big change

[@davutyalcin-]

Nice job Tony,end result is stuning bro 👌🏻

[@TonysRefinishingTV]

Thanks man tried my best lol

[@matts_paintwork]

Awesome as always mate!

[@TonysRefinishingTV]

Thanks Matthew

[@markg6jvy135]

Fabulous finish 👍👏👏

[@TonysRefinishingTV]

Thanks mark

[@jemmace2586]

Beautiful job you're doing there, I've only had a go at painting my plastic front bumper,on a vw golf 5. Lc9x, i actually got the metallic bit's to show through after it was clear coated. Using rattle cans as well. I did the whole bumper in two stages, different days, one 1k the other 2k clear coat. The clear coat was so much better. Thanks for the videos.

[@TonysRefinishingTV]

Awesome mate glad your project turned out well

[@B0tinh0]

Great video mate....car looks beautiful

[@TonysRefinishingTV]

Hey buddy nice to see you on the comments mate and thanks fella

[@dougwernham5209]

Excellent video very interesting thanks Tony.

[@TonysRefinishingTV]

Your welcome mate

[@taffwimp]

Nice thorough blow off & tack in between w.o.w & topcoat. 😉👍

[@TonysRefinishingTV]

Thanks buddy

[@richweston6202]

Brilliant mini looks amazing!! Is it a BMC colour? Thank you for the uploads on the mini really enjoyed them

[@TonysRefinishingTV]

Your welcome mate thanks for watching abs it’s Ral 5010 mate

[@andysmall6331]

If you are looking for a direct gloss system mate PPG delfleet is unbeatable.

[@redzed40]

awesome video Tony

[@TonysRefinishingTV]

Thanks man

[@lummy321]

Great video Tony man... Catching up mate 👆👍 peace out. B

[@TonysRefinishingTV]

Haha awesome buddy great to see you here man

[@kyleroscoe8082]

valspar makes some really good low voc solvent basecoat and good single stage at a really good price

[@TonysRefinishingTV]

Not really seen that about much here tbh my main reason for picking kapci is the double scheme so it’s a base and gloss scheme all in one system it’ll save us so much time and cost

[@edvardteath5951]

nice job cool ultamarin +

[@TonysRefinishingTV]

Thanks bud

[@angusmackay7281]

I've just discovered your channel recently Tony and I've found it really helpful. I was wondering is the likes of SP Supplies will mix Kapci Basecoat or Direct Gloss to order for those who just do an occasional job and can't justify a maxing set up? Thanks for all the work you put into the channel. I really enjoy it and have learned loads.

[@MrSprocket2u]

Brilliant .... highly recommed

[@TonysRefinishingTV]

Thanks fella

[@JohnWD40TC02]

Hey Tony, thanks for doing this video for us and getting it all filmed, edited and uploaded so quickly for us to watch it last night, I know it was a bit touch and go if the video would be ready on time 👏👏 What can I say mate, it was a fantastic video and very detailed as you took us through both the WoW primer showing us how you did it then the 2K Gloss work which came out great and for your first time using it I think it looked spot on. Great live chat last night as well mate and I was really made up for you for all the people online watching I think it got well over the 200 mark so that was great. Do you know if the Kapci 634 can be mixed as a WoW primer mate? I need to get something else to use for my wow maybe I'll try the Mipa if the Kapci is not a wow 👍

[@TonysRefinishingTV]

Not sure mate off the top of my head but if you ask Gavin in the group buddy he’ll know for sure bud or I can check the data sheet for you later if you like

[@JohnWD40TC02]

Nah no worries mate just thought I would ask you first in case you knew, I'll ask Gav and see what he says, cheers 👍

[@andyMSH700]

Nice to see you wearing a good headset with an air feed......no gloves is a mistake as your skin absorbs the 2K...pity. Love the minis...grew up on them with 1275 GT minis - lots of speed

[@TonysRefinishingTV]

I’ve got gloves back in stock now mate so don’t worry

[@akd052774]

Thanks for taking time to upload the videos & sharing all the work in great detail. I was curious about Kapci product which I have seen you using on different occasions such as here. Have you had a chance to use Kapci Basecoat & if not what's the feedback from guys in the industry?

[@TonysRefinishingTV]

I’ve just used the kapci base this week on a few jobs have zero complaints so far mate

[@epicasmasher5504]

Good job amigo

[@sw9506]

awesome job Tony. You make it look so effortless, How are you finding the overall result from the MP setup?

[@TonysRefinishingTV]

Thanks buddy and yeah it’s nice mate but then I like both the setups if I’m honest

[@smoggy1964]

Awesome job slow hand

[@TonysRefinishingTV]

Haha thanks mate

[@Mitzy-0409]

Top work 👍🏻

[@TonysRefinishingTV]

Thanks mark

[@gordonclark7632]

Good day Tony and once again a very enjoyable episode. Did you do the bonnet and doors at the same time? The shine of the paint finish iooks great. I am a fan of blue for some reason and I am picturing the car with perhaps white wheels as a contrast or maybe grey. For a car tha you have said a few times that is not being done to concourse finish I can only say, you could have fooled me.

[@TonysRefinishingTV]

Lol honestly this is just a standard paint in our shop buddy , and il be doing all the panels ect on Monday or Tuesday mate got the shell out the way so I can cure and get polished so as the panels come out and are polished they can then be bolted straight to the body so they don’t hang around on stands getting damaged

[@raymondstewart9263]

You don't use a mist / gripper coat first? Also how long between first and second coats and how do you know when it is ready for the second coat please? Thanks.

[@kobebazelmans4387]

Hey Tony. Very nice! What color code is that blue? 👍😎

[@io4166]

Nice mini

[@TonysRefinishingTV]

thanks man

[@mk1leg]

excelant job loved these useful vids

[@TonysRefinishingTV]

Thanks 🙏

[@recruitmentwebsites]

Looks awesome

[@TonysRefinishingTV]

Thanks

[@grantssmartrepairs]

looks mint mate 👌👌👌

[@TonysRefinishingTV]

Thanks man how’s things fella ?

[@chrisfreemesser5707]

The amount of work you put into a 99 quid paint job is truly admirable Tony :D Funny (to me anyway) that you'd call it a "paint scheme"...over on this side of the pond anything called a "scheme" is something very negative if not illegal/criminal. : I'm guessing that's not the case with Kapci :)

[@TonysRefinishingTV]

Lol we call all paint mixing systems schemes mate I dunno why haha

[@bertl500]

Brillant Job ❤❤❤😅😊

[@roccorickaby4985]

Nice videos mate and glad to see your Chanel growing! As a relatively new painter into the trade it’s great to see and learn new ways and methods while brushing up on technical aspects

[@TonysRefinishingTV]

Thanks man and that’s why I started and will continue the channel to do just that mate

[@roccorickaby4985]

@@TonysRefinishingTV I’ve only ever used satas for every aspect of painting but what do you think to the ls and ws400s please?I am currently in the accident repair sector

[@TonysRefinishingTV]

Absolutely love them tbh mate two of my all time favourites esp the ws400

[@deangaryjames]

Nice job

[@darrenmorgan2283]

Good video, enjoy watching. One question, If the car was completely bare metal it would be done with epoxy, why then on the rub throughs on the high build is it only gone over with WOW? Surely if its bare metal it would need protecting again?

[@TonysRefinishingTV]

It’s only a very small area mate even in factory’s they do the same if they run through on the ecoat or primer it’s ok on small spots big areas though I wouldn’t

[@pauliusu]

Tony. What is that air filter on your neck you are using? I'm DYI on spraying but this solution game changer. Im struggling with dry air line. Always getting some water pissing.

[@jasonbriankey3880]

I was just wondering because I saw were you did the temple in hyper silver just was wondering is it possible to use on a whole car. I am thinking to have my car done in the muti mix hyper silver. I would like for it to be 100% chrome.

[@garethw8884]

As a person that has never sprayed a car what are the measurements on that pot and what do they mean cheers fella

[@andrewlambert4934]

I need to learn to spray as I'm about to restore a car.....

[@jasonbriankey3880]

So have you done a car in a full chrome with the Muti mix hyper silver yet?

[@mylesmckenna3104]

Beautiful work! I'll eventually be painting my project in direct gloss..... I've only done base coat and clear before when I did smart repairs. With direct gloss would I need a dry/grabber first coat? Thanks

[@TonysRefinishingTV]

No mate apply it just like you would clear mate two full wet coats

[@mylesmckenna3104]

@@TonysRefinishingTV cheers! Thanks for the response 👍🏻

[@murilohenrique9115]

Awsome job buddy! but how its the gloss after backing? thanks buddy

[@TonysRefinishingTV]

Gloss retention is spot on with this paint mate

[@waynebrannan4778]

Loving the videos, can you give me a link to get the sanding blocks? Cheers

[@TonysRefinishingTV]

im afraid not we dont sell them

[@peterjohnson9487]

Love your work Tony! How do you avoid orange peel when spraying 2k? Did my Europa some years back and need to do it again, any advice welcome. cheers Pete

[@TonysRefinishingTV]

You need to approach it like clear mate tbh is the best way I can say nice wet even coats

[@frankvalencia9227]

Awesome job Tony!..I have a question my urethane primer converts to a wet-on-wet sealer as well with the addition of reducer but I was always concerned of the edges being rough before I shoot the base and I see you used it like that without a fade-out spray, I definitely have to try it like that then. I’ve always just used transtar’s auto primer in rattle can and hit the little spots, wait the drying period, lightly sand with 800 and shoot but this method will save me a shit load of time!,

[@TonysRefinishingTV]

It’ll be fine aslong as it’s thinner down enough I also find some slow reducer helps it to lay smoother too

[@jordan-mcc]

Would you recommend painting a classic in 2k letting it dry and then flatting it back. and hitting with some decent Laqure or pointless and just do it in base ?

[@TonysRefinishingTV]

you could just finish the last coat of gloss let it flash and then hit it with a coat of clear for abit of added protection mate we often do

[@James_hill99]

Unreal job Tony , young lad myself using iwata ws it’s beautiful but I fancy that Walcom 😆 where did you get it from with the 1.2 as I can’t find anyone selling it ? Cheers

[@TonysRefinishingTV]

Spsupplies.co.Uk mate look at the base one it’s the same gun mate just labelled as a base that’s all but it’s got the option for a 1.2 use my code too Tony5 for 5% off

[@James_hill99]

@@TonysRefinishingTV cheers mate have messaged them as they are out of stock with it but should hope to hear soon

[@masoodamg6633]

It was Great, Thanks

[@TonysRefinishingTV]

Thanks for watching

[@azacink]

Hey Tony, can I ask what temperature do you your booth set on in a cold January weather? Also do you recommend heating up the clear for better flow and prevent runs? Cheers.

[@TonysRefinishingTV]

So I have the booth set to 22.5c mate never really need it any higher , I don’t hear the clear or gloss up mate if it’s colder in the mixing room then I may leave it in the booth while I do prep or the base stage to let it come up to temp though

[@azacink]

@@TonysRefinishingTV Cheers mate, wishing a happy new year and hope times get better business wise and health also

[@TonysRefinishingTV]

Thanks man they will mate just one last big push needed atm that’s all

[@robertbills4290]

Did you spray the rear valence and the sills on the mini Tony?

[@TonysRefinishingTV]

There getting done seperate mate as I wants stone chip them and it’s easier on stands

[@ZUKE12345671]

Hiya Tony ! couple of things. As you know I'm respraying my Riley RMA . Stopped just before Xmas because it was too freekin cold in my garage. So, in my garage I have a humidity and temp gauge. At what point am I ok to start again? I think celly is 50% humidity and 50 deg temp but Im using 2k now ?? I have got one of those "little Devil" space heaters but again, Im not sure if they cause humidity?? The other thing is , watching you "tweeking your gun as you look at the fan pattern, what exactly are you looking at/for? I bought the FLG5 and its great but I would love to know what to look for ?? Cheers again mate...and Tony ..please look after yourself mate. take it easy pal !

[@TonysRefinishingTV]

I’d try and atleast wait till it’s say 10-15c ideally or above mate use fast hardener too that’ll help mate the space heater should be fine the humidity from that will be nothing compared to the heat it’ll pump out in my opinion but obv be carefull of exposed flames and fumes , the flg mate you can run full fan and at 2.0 bar air pressure 28-30psi as for fluid set it at day two turns out from fully closed , if it feels to wet shut the fluid off a tad if it feels to dry then add more fluid ect ect

[@katscan9114]

Question for anyone.. his last wet on wet was reduced high build primer. I would be afraid of it being too thick of product with bulky bits in product makeup. Could he have used anything else. Thin epoxy ?

[@TonysRefinishingTV]

some high build can be thinned to use as wet on wet its the same viscosity when its thinned as normal wet on wet some epoxys you cant paint over too so you have to be careful what you choose