How to Use the Lishi 2-in-1 Lock Pick

[@sophiophile]

I can single pin pick just fine, but I've spent the last 30 minutes trying to open a lock with no success using the lishi. It's really hard to control the counter-rotation of the cylinder to allow the pin to fall into place when your tension wrench and pick are attached to eachother. Edit: nvm got it. Don't rely on counterrotation of the cylinder. Just use less tension. I don't find it easier to tell which pin is binding with this tool yet, but I can still open a lock quicker. These are fun, but probably won't replace my standard tools at this point.

[@choymyth713]

My lishi keeps getting caught on something between 2 and 3 I gotta release all tension to move past that point and it becomes impossible for me because all the pins drop I've been trying for days and keep getting caught

[@sophiophile]

@@choymyth713 Are you using the same lock every time? You don't know if it's the lock or the tool until you try another one.

[@TNels]

@@choymyth713 Try another lock. With my Lishi I can get through the locks on my home extremely fast. But for some reason the locks I have set up at work for practice are much more difficult to pick. Kinda depends on the lock itself.

[@daviedood2503]

​@@choymyth713some leeche picks are meant for certain brands of locks. The Kwik set version may not work on Shlege (spelling) brand from what I've seen. That's why they got many different ones. Works on cars too. But u need a pick for Honda's, then one for Ford's, then a lichee for Mercedes-Benz etc. Some models like Ford Lincoln mercury lichee covers those 3 brands of cars to open. Theres a GMC lichee that will open any GMC vehicle. I don't think there's a ONE LICHEE to pick them all per se

[@stevel1475]

Would be awesome tool when there is a situation at work. Instead if drilling out the lock or damaging the door.

[@michealvickers]

It's a 2 in 1 because it's a pick and decoder. The numbers on top refer to which pin it is and numbers on the side is the cut for that pin.

[@daviedood2503]

Sweet was wondering how to read that

[@Tcarnes41]

Burglary has never been so easy I'm upgrading my pick set today.

[@throatpunch4789]

I assure you the old "smash and grab" is still WAAYYY easier.

[@philippeceline984]

so What? ... Are you naive enough to believe that burglar as profession? Take ends to the moment you get in? (i mean , right after youwalk through the front door?) I don't think so, ... a bit shorter Mylord Games ... in my experience, *so modest in that very matter*, *it's infinitely more complicated than that* ! *Besides if you don't wanna make endless journeys between jail and freedom?* *although it's up to you* *THEN* *Take Care with your Life* *we only get one* ... Life of course *and Time flies away so quickly* *please* *Think Twice* . . . ...

[@kungfubrandon6886]

@@philippeceline984 it was a joki

[@Youservezeropurposekys]

@@philippeceline984nah bro is talking from experience 😭😭

[@mr.s1961]

@@kungfubrandon6886 you sir have terrible humor, and we whoever has such humor should not be creating children to pass on said poor genetics.

[@randerson4124]

8 months since your last post, nice to see you back in my feed

[@Drakkmar13]

Glad y'all are back.

[@soul8bounce]

Who else here watches the Lock Picking Lawyer?

[@stevel1475]

I watch for kicks. Never had to pick a lock, not even for work.

[@Trustee-of-The-Most-High]

Everyone lol

[@ed6777]

yep lol

[@nathanmciver6496]

I don't advocate for criminals trying to cloak themselfs in being better because of rotten brianwashing terminilogy! Power to the people who care about society!

[@jalenjose3905]

The lawyer finds flaws on locks so the companies fixes them

[@andy1181-l3m]

To the burglars…this tool will help you guess where the pins are on the lock…but can you guess what kind of ammo I use? Here…let me put the thought in your head👍

[@philmcclenaghan7056]

This is so cringe I actually died inside. How many threatening decals do you have on your truck? Funniest thing is these types of guys are always fat and couldn't do shit.

[@luisgomez8635]

Lame

[@sethhlewis]

Cause you definitely heard them opening the door and 1 man CQB never goes wrong, right?

[@andy1181-l3m]

@@sethhlewis believe me…I know if someone is entering my house…,its not your standard burglar alarm…but its works

[@deweyabbott5310]

dude you may have ammo but if you dont hear them comming in you want know so i hope you sleep real light, the best thing is to have some type of alarm on your doors now cause, but it they probably have a video on how to disarm that also

[@henryshoots]

For those who are curious: the Chinese dude on the logo is Li Zhiqin ["李志勤"]. I think that's his name. He seems to be popular in China for making all kinds of lock picks. Shi means "the family of." So Lishi = The Family of Li.

[@VinnieVerite]

Is he the same guy as the keymaker on the Matrix Reloaded?

[@Kusamedi2881]

@@VinnieVerite hahahaha 🥳🤭😂don’t know how no one else Laughed at this!!

[@jerryy7650]

I have been practicing with my Schlage lock. It has been behaving strangely and I’m not sure what’s happening. The lock turns in both directions but only unlocks clockwise. When applying tension clockwise, I was always able to bind the first pin and clearly hear a click, but the other pins felt very loose no matter how much tension was applied, and they never bind. When applying tension counterclockwise, I was able to bind every pin and hear clicks along the way. Most of the time, however, the lock didn’t turn even when all pins were set. I did make sure to apply little tension. So far, I’ve only succeeded 3 times counterclockwise, although it doesn’t open the lock. Technically I am only supposed to practice clockwise, but I never succeed that way. Doing it counterclockwise didn’t make it open, but it provided some feedbacks for the very least.

[@pouncerminned863]

Any updates? Did u manage to pick it open?

[@trillfpv]

Use less tension and you will get it

[@bosco2023]

Factory Schlage locks come with spool driver pins from factory. You are getting false sets

[@sophiophile]

Use less tension than traditional single pin picking. Don't rely on counterrotation of the cylinder with a pin that's bound.

[@jaredj631]

OG KZbin lock picker is back.

[@OnyxKami]

Well, if they make it in, I guess I'll be making some abstract art.

[@walterwilliams268]

Do these work on Master padlocks as well ?? Thx…..🇺🇸✊

[@808fbi6]

Now all the robbers be like thank you

[@jacquisegunn6669]

Thank you😈😈😈😈

[@diamondsky3530]

Maan haha I lose my keys to my house all the time this is perfect lol

[@dtnel]

@@diamondsky3530 just get a bluetooth lock so you open with your phone then you only need ur phone. Seems like people don't lose their phone as they're on them all the time.

[@diamondsky3530]

@@dtnel I never lose my phone but if you have a Bluetooth WiFi lock it can be hacked. It happens to people ring systems all the time. I’m good on that mechanical stuff may take a few extra mins but it can’t be accessed by anyone except manually at my door which my cctv would pick up

[@rahlablumental9651]

😂

[@sadeqalkhafaji2314]

❤ Nice words, thank you. You talked about opening the lock if it was serrated on one side. What about if the lock is serrated on both sides?

[@JS-fb6ww]

I just got a set of lock picks and what I'd like to know is how does one know which direction to Leverage The torsion bar? I've been working on a lock inside my apartment on a door for days and days and still have made no progress using my pics. I think lock-picking is extremely difficult and should not be attempted by anyone who's an amateur and never done this before.

[@virmgaming250]

I use lock picks for fun i use a lishi to get into my or a friend's house in a short amount of time. Its cool and has many uses but the biggest application is just to make sure you get into whatever you need to quickly and efficiently. P.s i dont break the law i just occasionally help people get into their stuff when they lose the key

[@dsm9785]

Kwikset's are easy. I had a job where I forgot the key to the house. I cut a piece of aluminum off a piece of flashing, bent a small finish nail for the tension, ran the piece of aluminum in and out a couple of times and it turned. did both a passage and dead bolt in less than a minute and a half. Tried it later on the Schlage at home and it wasn't nearly as easy.

[@joshuagrochowski6999]

I’m a firefighter and have been looking for a quick/simple/an easy to carry why to get through deadbolt on calls like water leaks. Would you recommend this product?

[@wanaraz]

You guys damage everything getting in. Lol

[@photronsardarkling2064]

@@wanaraz So, the mansion is burning down and you're worried about entry damage 🤣🤣

[@Guidomike]

@@photronsardarkling2064 no your moms house I’m not worried about damaging her locks when I break in and shove my cock down her throat while she’s sleeping

[@photronsardarkling2064]

@@Guidomike Stick with what you know best. After all, there's no point in my mum laughing at your efforts as well as your boyfriends.

[@claramo686]

Great Class now let me move my bed by my door, i will do the same with my childrens bed for the back door and garage door...thank you I also find a good reason to have different beds from my husband ..No more snoring 😂

[@Truthmwground]

Thanks for making that easy to do mate ❤

[@philippehaake6123]

Hello very intersting, but how do you choose the good Lishi 2 in 1 for a specific door's lock??? Do you need different Lishi?? Tnx a lot Greatings from Switzerland

[@kmgcmk2]

Both examples shown had locks without security pins. You still need to develope some technique if you use this on a real Schlage lock with security pins. Having said that, once you master the technique, it is pretty easy.

[@bryanr.3241]

When will these be back in stock ?

[@operator1192]

I’ve got one of these, definitely a lot easier than individual picking.

[@nounta1016]

It looks like you need to buy a whole of these to be able to pick all of the common locks. Each one is $70, looks like it would be super expensive

[@operator1192]

@@nounta1016 yeah that’s the only downside. It’s still important to know how to pick individually but if you have like the KW1 and SC 1 or SC4 you can pick most common door locks. If you’re a locksmith or dealership maybe a specific automobile one would be nice to get keys out of a locked car. Or the Masterlock option for padlocks.

[@samdaclamm1334]

So the sc1 only works for house doors?

[@operator1192]

@@samdaclamm1334 anything with a Schlage keyway, so for me all I’ve really seen so far is house doors. Lishi makes separate tools for just about every keyway out there but they are kind of expensive so I would prioritize getting maybe 2-4 of the most common keyway tools and call it good.

[@samdaclamm1334]

Which one would you recommend for combo locks and masterlocks?

[@sthakld87]

This worked wonders on my neighbours doors thank u

[@mattilatvala4164]

JUST INSTALL the Abloy lock, the Finns have had least need, but the best locks for decades. 😉😎

[@RjBenjamin353]

Thanks.Dude!! I was planning some plaps here in Detroit and that’ll come in handy

[@detroit313vlogs7]

Lmao

[@krukov100]

So are those ONLY for Kwikset and for Schlage ?

[@Urbex_Undergroundexploring22]

I’m having problems trying to get this to work. Any good tips?

[@eliaspagan5337]

Can u use this for a car as well?

[@MillionaireHoyOriginal]

Level 100 Lockpicking.

[@edition-deluxe]

More like level one lockpicking.

[@danielsoodeen9378]

That's an awesome tool.how much does it costs

[@mossie1954]

over a $100 each

[@PipsOww]

So this works in locks upto 5 pins? Or only 5 pin locks.? Pretty new to lock picking so some direction wouldn't go astray. Thanks

[@matzedapresi3862]

Very good! Is there a manual?

[@Jakeisinthepool]

I tried to google lishi sizes so I can understand why there are so many lishi with differnt model but there is nothing. I hope you can make a video of different lishi use for different locks

[@RC-nl9yp]

Question? What did do with the home owners after I pick there lock after watching this video? Do you have a video on how to tie them up? 🤔

[@stevel1475]

🤣

[@geraldgwynn9383]

It does seem he's teaching criminals how to break into homes

[@mrpresident7121]

Hey what about the different models? SC1 SC4 KW1 KW5 AM5 M1/MS2 LW4 LW5 etc, how do you know which type you can pick with each model>? IS there any site where we can find specifications for these models? Thanks for posting @ITStactical

[@Dognme]

I was looking them up and what’s the difference between the M1/M52, KW1, AM5, SC1, and the SC4

[@danielsfbay]

I use this professionally, and one hang up is the mushroom pin. A lot of residential grade kwikset and schlage cylinders come pinned with them. If you don't know what I mean when I say mushroom pin...all good.

[@DCJNewsMedia]

Really smart people have gone to the next level and not count on locks.... it's on the low end of protection... Such as motion detection, video in 3 different or more angles floor pins..door leavers...etc etc etc..as well as stop measures in case a breach is made... And they may spend from 400-4,000 to guard family and property..... You're mind is your only limit. God bless you all.... Excellent video

[@thewikid8815]

*your

[@Dangumad]

can this used for Cisa security profile locks?

[@nojabhere]

All the thieves watching 👀😆

[@vblic]

Thanks for sharing this knowledge. It was very helpful to some. 🤔

[@paulnightwolf9043]

Where can I buy one of those 😏

[@chriscrouse3918]

You have to have a different decoder for each type of lock. If you’re going to carry around all those types of decoders, you might as well just get a set of bump keys.

[@adbrooks95]

Don't be a party pooper. They are fun to use

[@chriscrouse3918]

@@adbrooks95 you're replying to a 9 month old comment about something that takes the challenge and feeling of accomplishment out of lockpicking and saying it's fun to use.

[@user-rz8gx3fh1p]

@@chriscrouse3918 if you are doing it for fun, yeah it's cheating. For everyday pro use. They are damn nice.

[@bakgammon]

@@chriscrouse3918 I'm replying to your eight month old comment lol

[@mattkahle93]

I'm going to reply to a 1+ Year old comment just to add: You can't decode with a set of bump keys! That's the coolest part about this product to me. Making a new master key? That sounds kickass! Sorry to revive the comment, I just couldn't resist ;) If someone comments on something I wrote I never see it, I don't how y'all keep up with all the notifications haha have a good day ✌️

[@joesalespro]

I’m trying to order. I have a BHP deadbolt for my storage room that I lost. What exact model number lishi do I add to cart? Help please. Thnx

[@ScottONeill-l8n]

Are these for use in the U.S or will they work on UK locks? TIA 👍🏻

[@josephcarlos8463]

Wow just awesome useful for when Zombies come. I can find locked shelter. Thanks so awesome. Or even civil war breaks out. Great invention for sure. It's in my Cart...Thanks

[@patrickseevers3858]

How is it for starting cars. Can you use it for that or just for house locks? I lost my truck keys, lol

[@BasaysayTv]

Which 1 can be used for padlocks and doorknob?

[@JS-fb6ww]

The problem with these tools at that there's about two dozen and a half versions of them and no one would really know which one they needed unless you specifically knew the brand of the door lock that you had on your house or the door you were trying to get into that wasn't part of your house.

[@Numenor7]

But do you need different versions for each different lock type

[@adamspringer2442]

I Love engineering and science!

[@randomassclown]

These are nice, but I installed a micro switch instead of one of the pin sets and it sets off an alarm. It works great.

[@mr77617]

This makes me feel better

[@MrAddonald9]

I am very grateful for this video and I need some help from anyone who can offer it. I recently bought one of these, my first, and the problem is that it will not fit in any lock I try it on (it is too big).. In the video it is labeled SC1, mine is labeled CY24.2. I wonder is mine too big and I should try to get a smaller size? If so, how would I know what a smaller size is? I look forward to someone responding to my questions! Thank you.

[@marianofuntime8366]

did you figure it out? im running into the same problem.

[@Bronn_Bravil]

Is this work in the UK or these are designed for USA?

[@Painintens]

So how do you pick a lock when pins on the bottom of the lock

[@johnnyyoungblood9059]

Where do you purchase these kind of products?

[@jasongreene9302]

I have three vehicles 90's and older that are locked and I have misplaced the keys in one of them. Not sure which one possibly in one's trunk. It's either a locksmith payed to unlock each of them in hopes to find them or buy something to unlock them all myself. My question is will this work for all the locks?

[@jonel5001]

Those work only for US type locks. If you want security, choose Abloy lock.

[@lifewiththerockykrag9536]

Do you think that would work for a slot machine that predates 1920? Thanks

[@donaldstrump226]

You talked a lot about how great the tool is and it's features but never mentioned the lock type or brand names or even showed the entrance to the cylinder. What most people don't know is that there are many lishi picks for different locks. For the car locks alone there's 1 lishi pick for almost every brand name. Even some popular rand named locks have their own picks. It would be nice to know which locks I can use these picks on. Houses locks, padlocks america and or European.

[@THarjo-ks6pf]

Looks like a great tool that's going to be corrupted by evil.

[@FriedPi-mc5yt]

You can easily say the same about lots of things. There are bad people in the world that will use inanimate objects to do bad things. You don’t need to take things away from people because a bad person might use it for bad things. If you do, you’re just an overreacting Karen that would take fire from people because of arsonists. Or take water away because people have drowned others. We have enough moral busybodies in the world. We don’t need more.

[@russell28533]

I'll be ordering mine. Best part is it has the face of some Asian dude laser etched on it. That's a win-win for everyone.

[@ITStactical]

Was an instant pick-up for us too. We're working on getting more back in stock now! ~ Rob

[@imapiledriver2462]

mine dont

[@alschatz2586]

Are these only for a certain brand of lock or will they work on like a Yale lock, etc ?

[@IIm_Not_The_Main_Character]

Cool, tool and scary to know that a simple device makes locks obsolete. I can even imagine a simple controller with rudimentary S/W can essentially make a modern day skeleton key that would do the whole thing is less than 5 seconds (assuming the pro's who complete can do it faster than that, doubting criminals can)

[@OG_BiggusDickus]

Your basic burglar isn't even aware this community of lock pickers exists they're not interested in getting better at their craft they're just morons.

[@CanItAlready]

Pry bars made locks obsolete long before this thing came along.

[@jaymethodus3421]

@@CanItAlreadythat would be clear evidence of breaking and entering

[@CanItAlready]

@@jaymethodus3421 And do most burglars care about that?

[@wpp6986]

@@CanItAlready were we talking about burglars?

[@kwayne4188]

Oooh weee sweet thanks 🧐🥸😎

[@juerbert1]

But only for locks up to 5 pins, right ?!

[@kenwhite6739]

The 2 in 1 refers to a pick and decoder in one device, not a pick and tensioner.

[@carlmarks2798]

Thank you for the teaching young kids how to beak in my home

[@davidstableford425]

I bought one but it isn't that brand and it doesn't fit into the key hole.

[@EdwinFairchild]

that thing did not fit into any lock of any door around the house lol seems to thick, should be state somewhere if its meant some specific lock type i guess

[@donaldolson1362]

I like this tool is it for sale

[@tysk5729]

can this pick europian locks im just curiouse if you could use this to get in my house

[@pclutch]

I have 14 lishi tools and three practice locks plus the locks in my house. Not a single tool fits into any lock i have. The m1/ms2 tool doesnt even fit into the practice padlock it came with.

[@eddydizon7174]

my kw5 just arrived frm on line tried it but it wont fit my doorknob its too thick what should i buy again? philippines

[@long-range-eliminator]

What all locks will these work on ?

[@billyperryman2768]

Just got mine today and I can't find a lock in sight that it will fit in. It's to wide to slide in the key way. Why

[@jgbelmont]

Based on a comparison with average production values of other crops from 2003 to 2005 marijuana is the top cash crop in 12 states, one of the top 3 cash crops in 30 states, and one of the top 5 cash crops in 39 states. [23] Marijuana is the largest cash crop in Alaska, Alabama, California, Connecticut, Hawaii, Kentucky, Maine, North Carolina, Oregon, South Carolina, Tennessee, and West Virginia.

[@jgbelmont]

@HH Marijuana specifically!

[@jgbelmont]

@HH The number one for all states combined genius! MARIJUANA!!!

[@jgbelmont]

@HH I dont smoke weed so wrong again.

[@paulrooster2108]

Thanks a lot man , you just made my Shotgun Breaching a thing of the past , you know what I'm still going to do it 😝

[@AquaTech225]

The only one I had trouble with of the lishi was the masterlock lishi. But not really sure if it was a bad one or what

[@FriedPi-mc5yt]

I had trouble with mine also. It would kind of grab randomly for some reason. Almost like it had burrs on the pick. But it didn’t have any. I think it’s due to the short keyway and the angle of the picking tip.

[@jeminiseven]

I got the SS001 and it doesn't fit into any of my locks in my house. The key part is thicker than the key holes on all of my doors.

[@esmaeiljafari-vp4bn]

سلام استاد من یکی از این ابزار نیاز دارم شغل من کلید سازی هست در ایران لطف کنید راهنمای کنید چطور سفارش دهم تشکر

[@CKILBY-zu7fq]

I noticed you said one was 5 pin. And another is 6 pin. But you dident say weather the picks came as 5 or 6 pin types. Or do they make these in other types. I'm shure no berrals but. Are there other types?

[@kevinmaly59]

How do I get ahold of one!!!? That is cool!!! Oh Mr. Lock himself out every now and again could use this!!!😬😂💯💪

[@gav6808]

Make ebay your friend.

[@andyconser179]

I got all the decoders that you'd used for padlocks, residential, and etc and they don't seem to fit into the keyholes that I got from a cheap beginner lock pick set.

[@andyconser179]

Help? Lol

[@marianofuntime8366]

did you figure it out? i have the same problem.

[@jonathonher]

Is the kw1 best for general use.

[@thisguyhd6591]

aha... well mine is stuck on 1... I can't pull it anymore out or push it anymore in. what should I do. I just bought it

[@frazzle657]

I have the yale 6 and 6b and let me tell you. After about 2 hours I've managed to open one of 3 locks... once

[@davidsekora5183]

Oops

[@maddog9793]

I have the same exact pick but it doesn't fit any lock I've tried to insert it in

[@dromo76]

I just got one and the hi g doesn’t fit any key way I’ve tried.

[@zenkipac]

Doesn’t the 2-in-1 mean pick and decoder instead or pick and tensioner?

[@ramellajoe]

So which one would be the most common to use?

[@ITStactical]

The answer honestly is both. You're likely to encounter both lock types. I'd say personally I see more Schlage, but Kwikset is close behind. ~ Rob

[@stevel1475]

@@ITStactical in Canada we don't have Kwikset. But we have a brand named Weiser, I think it's the same as they have the Smart Lock which you can decode the lock.

[@Soulsaber_7]

hi, will a 6 pin lishi, work on a 5 pin lock?

[@DanielH]

Which lock is unbreakable by this?

[@mariesvilmy5680]

the electronic lock

[@FriedPi-mc5yt]

Bowley

[@lonewulv13]

So what's the difference between the two?

[@Yisrael_garcia]

What’s the difference between the sc1 and kw1?

[@zacharycovelly3437]

Can anyone tell me why the one i have is too big to go in any lock? The whole thing is too thick and the slots dont line up