1967-72 Chevy C10 Bed Removal

Are you looking to remove the bed off your 1967-1972 Chevy or GMC truck? If so, I'm glad you're here! There are several ways to pull one off depending on how much help you have. In todays video, a father and son have come to pick up the bed off my 1969 C10 donor truck. They even brought their own tools to remove it. Stick around to to see how it turns out!
#ItsTheChad #C10bedremoval #C10trucknerd
Bed Lift Bracket - amzn.to/3PVxLQh
Tail light lenses - amzn.to/3b6ycZk
LED Tail light lenses - amzn.to/3zD8oxD
Red Van Style Flush Mount Lamps - amzn.to/3qyiRFm
Amber Van Style Flush Mount Lamps - amzn.to/37ZYwCF
Deluxe Side Marker Lamps (Red) - amzn.to/3qAlpD8
Deluxe Side Marker Lamps (Amber) - amzn.to/3qAlyqa
Deluxe Side Marker LED Lamps (Red) - amzn.to/3NjTsci
Deluxe Side Marker LED Lamps (Amber) - amzn.to/36t2fIv
67-72 Factory Assembly Manual - amzn.to/3nKvLih
How to Restore your Chevy Truck - amzn.to/3nKOdHI
To Follow and See What I'm Up To:
/ itsthechad71
Check out all my 67-72 videos here:
• 1967-72 C10 Trucks
Keyword research tool for KZbin (TubeBuddy) - www.tubebuddy.com/ItsTheChad
//My Gear Used:
My Camera -amzn.to/3FMHcML
GoPro - amzn.to/39EJmDF
My Tripod - amzn.to/3gLfeKO
My Microphone - amzn.to/485QAtY
My Lighting - amzn.to/34Y4aDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting ItsTheChad!

[@DANIELROMERO-cv3tu]

Great video Great job, and no got hurt Nice bed I would love to see your project truck

[@C10TruckNerd]

Thank you!

[@LoNeWoLf6661000]

I lifted one of these off by myelself when I was doing rear suspension work. Couple ratchet straps and a homemade A frame and some tall jack stands

[@C10TruckNerd]

Heck yeah! I love seeing all the DIY setups guys can create!

[@jimmysapien9961]

Exactly

[@shortcutgarage]

I wouldn’t mind trying that bracket out on my channel, I’m a one man show for a 71 C10 project too. Love the congent

[@C10TruckNerd]

It’s a pretty cool setup. Only thing one might add is an extension arm on the cherry picker to keep it more level when hoisting. You’ve got a great channel! Love the 71! My 1st C10 was a med green 71 custom very similar to yours. Keep up the good work and thanks for watching!

[@MrMpala69conv]

A 4x4 cut to width of The bed inside rails works just as good!

[@C10TruckNerd]

I have seen some others do that with an eye bolt. How did you secure the 4x4s under the rail? Clamps?

[@MrMpala69conv]

@@C10TruckNerd i manage to put it in the middle and didn’t need to balance it. I once pulled a long bed and camper off a truck with the engine hoist.

[@stevesmith1493]

I’m sure rolling that hoist on that gravel was fun.

[@C10TruckNerd]

I don’t know what we were thinking! We pushed the truck back so we could raise the bed and push the truck out from under it. We tried rolling the hoist a few times and realized we were idiots and pushed the truck forward. It was a little hot that day. Lol

[@sjcali6161]

I used PB Blaster and let it sit for 30 min. All 8 came out no problem.

[@C10TruckNerd]

You were lucky! It seems like I always have to cut them out.

[@sjcali6161]

@@C10TruckNerd when I tried to break them at first they didn’t budge. I put PB blaster on, waited 15 minutes, sprayed another layer on, waited another 15 min. And they broke free relatively easy. First time the bed was off the truck. It’s a 70 C10 and I did this 4 days ago.

[@C10TruckNerd]

@@sjcali6161 I'll have to give the Blaster a shot next time. Thanks for tip!

[@racer67]

I need a good long bed mine is done the floor is so rusted its to far gone this one would of been perfect its the same color. Under mine theres a spot where its sitting on the frame mount n theres a hole there but theres no bolt or hole in the bed floor for a bolt to go thru its inbetween the 2 mounts behind the cab like from the cab back there a mount with a bolt then another mount with no hole or bolt then the flat mount with bolt wat was that for a longhorn adition or something??

[@MrMpala69conv]

Engine hoist works good for me

[@C10TruckNerd]

It worked pretty slick. Did you have to add on to the cherry picker arm or did it pull fairly level for you?

[@jamesharlanjohnson6882]

I am shocked that those 3" caster wheels did not roll smoothly over that gravel.

[@C10TruckNerd]

I do miss the days of having a concrete driveway. Biggest issue we had was the wheels got caught in the ramp slats.

[@jamesmedina2119]

I'll have a homemade bed lifter & cart for sale before long Chad

[@C10TruckNerd]

I’m sure it’s better than the store bought ones! I just need a shop!

[@deanwilliamson4979]

Hi Chad. Thank you for all the videos. My truck bed is great, but there is damage to the forward panel. I want to replace only that panel. Is there any way to remove that thing without taking the whole truck bed off? Thanks!

[@C10TruckNerd]

I have never tried to pull it in place. You might be able to get some wrenches between the header and cab to try. If not, pull the bed mount bolts and slide the bed back a few inches. That’s a great question I would like to know too!

[@Freight-Train7.3]

Unfortunately the bed has to be lifted up

[@Ronniepangelinan1]

What was the tonnage of that hoist

[@C10TruckNerd]

The cherry picker was 2 ton and the bed removal kit was 800 lbs max.

[@crudeprelude]

Any chance a cab is up for sale?

[@C10TruckNerd]

That one is gone. Might have another soon.

[@jimmysapien9961]

Please cement driveway chad 🤔

[@C10TruckNerd]

Maybe one day!

[@lensmanicfeleven1847]

...gravel.....

[@C10TruckNerd]

Right? Maybe one day I'll have some concrete. It was too hot that day. We pulled the truck back so we could lift the bed and roll the truck forward. I laughed when I watched trying to roll the cherry picker on the rock.