Windshield Removal the Right Way?? 67-72 C10

Are you looking for an easy way to remove the windshield in your 1967-72 Chevy or GMC truck? There's no reason to take it to a windshield shop if you have a razor knife. In today's video, I will show you a quick and easy way to pull one out in your driveway!
#ItsTheChad #windshieldremoval #C10TruckNerd
Razor Knife - amzn.to/3zzHsOZ
Safety Gloves - amzn.to/3PIJ0fl
67-72 Factory Assembly Manual - amzn.to/3nKvLih
How to Restore your Chevy Truck - amzn.to/3nKOdHI
To Follow and See What I'm Up To:
/ itsthechad71
Check out all my 67-72 videos here:
• 1967-72 C10 Trucks
Keyword research tool for KZbin (TubeBuddy) - www.tubebuddy.com/ItsTheChad
//My Gear Used:
My Camera -amzn.to/3FMHcML
GoPro - amzn.to/39EJmDF
My Tripod - amzn.to/3gLfeKO
My Microphone - amzn.to/485QAtY
My Lighting - amzn.to/34Y4aDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting ItsTheChad!

[@brianmooney3739]

Hey thanks Chad I'm way out in moccasin Montana doing a 63 Chevy stepside and a 72 fleetside GMC ground up together in unisoneverything's working out pretty good because there's no timeframe they're mine and when they're done I will just drive them I'm taking him to final paint and everything 2 years now hope to have them done within a year all the rough work and welding is complete and now I'm doing my body works have restored about 25 in my life cars and trucks fun to get back into it after twenty years of BNSF working on the track railroad thank you again

[@C10TruckNerd]

That’s awesome Brian! Two at once is a big task, but like you said, go at your own pace. If you have FB shoot me some pics of the projects as they progress. Facebook.com/ItsTheChad71. Thanks for sharing and for watching!

[@jamesritter]

Looking at doing this on my K10. Thanks for the demonstration. :) Hey if you do decide to go to the C10 nationals, lemme know. I'm driving out there from Lenexa KS and can't talk anyone into going so it would be great to look around with other people out there.

[@C10TruckNerd]

Thanks James! It really went smooth. I have another event that weekend or I’d love to go. I’ve never been to one yet. My buddy won the 67-72 truck of the year at Nationals in Texas back in May. Pretty awesome!

[@thebikefiles4654]

Welp great video i just busted my windshield though tip for anyone if you break the windshield it comes out easier lol

[@C10TruckNerd]

Thank you! A good ole hammer is quick and easy!

[@tomdarkart1]

There is a LMC video on removal and replacement. They cut the inside rubber which is actually what holds it in, cut across top and sides the you dont actually have to cut all the way through lower areas. Once top is cut you can pull the inside rubber off all the wsy around and the windshield is loose. I did mine in about 15 min or less.

[@C10TruckNerd]

I will check it out. Working hard and not smart is my motto. I need to figure out how to switch that! Thanks for the info!

[@tomdarkart1]

@@C10TruckNerd you're welcome. When I searched KZbin that lmc video came up under yours and others.

[@Challenged1]

I like your shirt. How do I get one?

[@C10TruckNerd]

I’m testing a few out right now. Hopefully I can get some out soon.

[@jasoncolwell7293]

I need those plastic vents in the dash there lol mine only had one and it was busted all to pieces

[@dondavis2546]

I've taken out a dozen

[@C10TruckNerd]

Any good tips or tricks you have learned pulling them?

[@dondavis2546]

👍

[@paneltruckbob]

Hey Chad you forgot one more model the Panel I have a 68 and a 57 they are the same as the pickup truck at least to the back of the doors thought I' d mention that.

[@C10TruckNerd]

Good deal! Thanks for sharing the info!

[@Jones-Malone]

Do you happen to have any cabs available for a 72 AC c20? I believe the floorboard is too far gone on mine for floor pan replacement lol I’m about 30 minutes or so northeast of you I believe

[@C10TruckNerd]

I don’t have any cabs right now. A guy I know has a 72 AC cab down in Ark City. Not sure how good it is. Shoot me an email and I will get you the info. My email is on my main page.

[@tomdarkart1]

I could use that rear sliding glass window. I leave the solid one in because i dont want to spend $450 for the sliding rear. New windshield is only 180.

[@C10TruckNerd]

I don’t understand why it’s so much more!

[@tomdarkart1]

@@C10TruckNerd the rear window seal is more as well, plain glass is not. Windshield seal is $49, rear window seal is $57. This is based on LMC, classic industries and AMD prices.

[@user-fw6yo2wd4r]

Hay Chad what about the rear siding window forsale

[@C10TruckNerd]

I did sell that one at a swap meet a while back. I didn’t realize how popular those were until I parted the truck out.

[@alexmendoza8660]

Chad I’m working on a 67, will a 68-72 front windshield fit my 67

[@C10TruckNerd]

Yes it will. Just the rear was different. Only difference over the years was if you have the stainless trim around it. It and the gasket were different over the years.

[@alexmendoza8660]

Okay thank you

[@C10TruckNerd]

@@alexmendoza8660 you bet!

[@kevinwiley491]

A guitar string or piano wire couple blocks of wood a guy on the inside guy on the outside cut it out easy

[@C10TruckNerd]

I haven’t tried that yet. Hear it works out slick!

[@jeffreytodaro5269]

I did my windshield I cut the gasket from the inside & it came right out from the top first!! Peace

[@C10TruckNerd]

Good deal!

[@dondavis2546]

No no no The best way I know It's because the rubber is so dry and hard it's the cut to face the rubber rate off And get down behind of it with a puddy knife And carefully break the glass loose Without breaking the glass Without breaking the glass

[@C10TruckNerd]

Good tip!