2012 chrysler 300 v6 3.6L water pump replacement

[@EME4MexicaWarrior]

I’m about to do this job later . At first I thought it was the lower hose but no I replace the hose and keeps leaking. The only thing that worry’s me is that last bolt at the very bottom where the crank pull is at

[@ihacker1139]

It’s actually fairly easy with the last bolt. I thought it was going to be hard too. The problem with me tho is that I overnighted one of the 10m bolts and snapped the head off. 😅 it runs fine tho and don’t see no leaks. I hope it stays that way.

[@kenworkburton8324]

Did that fix the leak ?

[@EME4MexicaWarrior]

@@kenworkburton8324 yea I actually got it done . The car was sitting for almost 2 months cuz I had other issues like the throttle body fuel pump and fuel sending unit . Also I had to buy a new battery but it’s running fine now

[@DOOPS70]

Thanks man, definitely helpful gonna change mine this weekend.

[@JaboTheMechanic]

Glad it was useful

[@DOOPS70]

​@JaboTheMechanic thanks again, I didn't bother waiting i just did it and man you don't know how happy I am. Been having overheating problems for a minute and that water pump was the only thing I didn't change yet and I'm grateful. It's back up again. 🙏🏾💯💯💯

[@dubtv6160]

Very nice i love how you show everything and go into detail

[@keenansalazar]

This video saved my assss, thank you so much

[@LawrenceHanson-b9s]

Well could be a crack radiator like what I had a hairline crack and that was very expensive and there could be radiator hose that you don’t see until it gets to 200° and you turn off the key and it hisses out that’s another $50 for a hoseplus antifreeze oh my God that was another hundred dollars

[@Smr402]

Hellooo, i just saw your video on modifying a 2006 mercedes stereo to accept bluetooth, i was wondering where you were located and how much you might charge for a 2006 e350

[@mickeygogo83]

So just curious if it wouldn't be easier to remove the rad fan to gain more room for the job? Or is it too much of a hassle to take out?

[@tango0032]

Idler pulley 16 mm torque is 41 ft lbs or is it 13 mm at 18 ft lb? I haven't started this project yet just making sure b4! Thank you.

[@RichardSmith-ic1zw]

I would just remove the radiator and the front end so i could get closer to the belt