How to replace sepertine belt on 2011 camry 2.5L alternator belt power steering belt

[@chriswilliams2652]

Thanks for the instruction. We just bought my daughter a 2011 2.5l camry and I need to do all this pm so I know where I stand. Thanks for taking the time to show us. I looked under the hood and thought, Thanks for all that room you gave us toyota! They could have spared another 2 inches sheesh!

[@SuperKota96]

Thank you so much, snapped a belt this morning and was able to fix it thanks to your video, thank you very much!

[@anthonyramirez3873]

Thank you so much for showing us how to do it I personally appreciate today i did my corolla belt and tomorrow i going to do my camry belt with you help is much easier again thank you

[@russellwalsh9081]

Very well done on the tutorial and mechanical skill.

[@jaykellett2327]

My wife's 2010 2.5L Camry has a faint squeaking sound coming from the belt area. Sounds like the idler (or tension) bearing. I might as well change the belts too, as car has 98,000 trouble free miles on it. Based on this video it looks like the idler and tension bearings are easy enough to get off. Thanks.

[@shapho4056]

I have 115k miles and just did the belts. Was I supposed to change the idler (or tension) bearing as well?

[@robertlee4464]

Good tutorial 👍

[@chavissalazar846]

thanks for the video it helped me a lot👍

[@JaboTheMechanic]

Glad it helped. Thanks for watching

[@KashifKhan-uj5hd]

I have problem with driver belt getting break, there is some alignment issue i guess, can you help in this matter I had shown to few mechanics and they are unable to resolve the issue. engine is good all well in the car except this driver belt is not running evenly on the compressor. and getting break i even changed the, alternator, water pump pully, and compressor. but still the same problem exist. what I can do to run it smoothly. i have doubt now on crank shaft pully. as the drive belt is wobbling a little bit and on coming on compressor completely or evenly like you showed in your video. please help

[@sarahspiegel7141]

Jan. 19, 2023 I gotta ask cuz u made it look so stinking easy that now I’m wondering if I have the wrong drive/alternator belt, what belt did u use? I’m beginning to think that the one I have is too small

[@waltersweet4595]

Go to bando belts website and they will get you model numbers. I use Bando belts for my Camry

[@sarahspiegel7141]

@@waltersweet4595 thank u so so so much

[@waltersweet4595]

@@sarahspiegel7141 3PK1200 and 4PK1240 Bando for 2 belt system on 2.5L engine. I have a 2011 Camry 2.5L

[@dustinallen1393]

Great video. Thanks.

[@RiyuXDs]

what is the belt spec for the 2010 2.5L camry XPK XXXX?

[@shimxininahi8024]

How long is the 14mm ratchet wrench? Where did you get yours? Great video. I thought it was so hard to do.

[@timfarmer648]

thank you. 🤠

[@tripyramidpictures9224]

Thanks

[@butch6693]

Just need to know where the belt tensioner is at for the alternater not the power steering

[@markmartinez911]

Are both belts the same

[@markmartinez911]

I’m trying to get them on autozone but they aren’t telling me for a power steering belt

[@KashifKhan-uj5hd]

the driver belt is not coming evenly on compressor a little tilt is there and that is causing the belt getting break. and once i open the compressor it will break immediately and may be 10=15 minutes.

[@Rohrbacher14]

You could have a worn bearing in a pulley or in the compressor

[@shapho4056]

What are the names of the two belts? Alternator belt and ?

[@JaboTheMechanic]

Power steering

[@shapho4056]

@@JaboTheMechanic ah thank you! I only knew the part numbers. Thanks for making this video for the 2.5l btw it was very helpful!

[@jeffreygiraud6800]

More light please

[@samikhattak1783]

Hi, i am in Saudi Arabia and i have Camry 2011, 2.5 SE, US specs. i am unable to find both the belts in Saudi Arabia because they only have Gulf specs spare parts. Please if you can share the sizes of both the belts or give a link of amazon or desert cart so that i can order it online. I am in a real trouble. The belts are worn out and they can get damaged any time. please help me.