Jackson Racing C38 Supercharger Install on Subaru BRZ

[@nickcampbell4725]

So much time and effort. Keep up the hard work, Nick. You deserve more subs

[@alphasaur]

Dude great quick walk through, made it seem super easy.

[@NickGT]

Thanks man! If you use the booklet just Jackson gives you it should be a very smooth install

[@tfpjr]

That's so cool that your dad helped you out too! Look forward to seeing/hearing it in action.

[@tfpjr]

Merry Christmas Nick! How's that c38 holding up?

[@jdmchris13]

Hi Nick! Great video! The reason the intercooler piping is touching on the driver side is because it looks like the piping is slightly mis aligned. When you get those aligned properly, it will fit perfect with no touching anywhere!

[@deej628]

So much progress! Props man! Can't wait to see it finished! Be proud of your work!

[@midnighteightsix6919]

Great video man! Most people are too scared to even change a wheel and you've done a whole supercharger at your house. Very interested to see what numbers its putting down especially with the injectors and manifold :)

[@bhavneetsaini7941]

for the pcv valve when u put on the pcv hose the black end wasnt like way to small compared to inner diameter of thehose?

[@chrisschenk_]

Sick dude. Happy for you!

[@chevyknight8441]

Did you have to rebuild your engine when you run e85 and the new pulley? And what size injectors did you use I have the same c38. I’m having problems starting my car. I have to push the clutch in and pump the gas to start it. I have 1300cc injectors

[@SmittysEditsYT1]

Do you know the commercial part # for the PCV valve needed is? Or what car it comes from? Trying to find it elsewhere than jackson racing.

[@harisqureshi7469]

audio is jacked up again.... jk 😂😂 awesome video can't wait some puullssss

[@harisqureshi7469]

nickgt350R lmao i feel so bad but I had too 😂😂😂😂 still watching it!!

[@harisqureshi7469]

nickgt350R I comment awesome video on almost everyone cuz I know it's gonna be awesome but I'll watch all of it just to make sure the Audi is good! 😂

[@harisqureshi7469]

nickgt350R audio was good all video! seems like fun!

[@harisqureshi7469]

Brian Luu hell yeah buddy.

[@JorgeGonzalez-cw1kk]

Great video, subbed! Looking to supercharge my Gt86, and just wondering what made you choose this kit over others? And how much did it cost you to get it tuned ?

[@JorgeGonzalez-cw1kk]

nickgt350R have you ran into any issues with the kit so far?

[@donaldtrende1498]

Is it worth the time and $?

[@NickGT]

I personally think so. It's run flawlessly for over 3 years with this kit, enjoyable power, and getting more power through e85 or changing the pulley is fairly easy if you want more down the road

[@damnitdan2393]

Is this a 2017 motor?

[@beardedSpartan454]

You cant keep the snorkel from the oem air intake? I would think that would help feed air to the air filter

[@NickGT]

Yes it can be reused for this kit

[@beardedSpartan454]

@@NickGT I'm thinking about boosting my car with the same kit but I'm at 81k on the motor do you think ill have any reliability issues? How many miles was yours when you installed the kit and how many do you have now?

[@NickGT]

How the cars reliability will be all depends on how the car was treated and maintained over the years. At installation the car has 43k miles and currently has 77k miles

[@fiercenet]

great video, hows it running?

[@xHollox]

Hey when did you order your kit? And when did it arrive? I'm on week 6 of no kit lol

[@adrianjimenez4897]

Evan Garcia same here bro

[@xHollox]

nickgt350R it's finally gonna be at my door tomorrow!

[@WhenzLunch]

looks so nice

[@autozombie5427]

sweet setup!

[@JoseMarban]

What size torque wrench you using 1/2” or 3/8”

[@loveever89]

Hi Nick, Do you know whats the difference between the C30 and C38 rotrex? I'm debating which I should get.

[@loveever89]

So I suppose the C38 makes more power?

[@mathewg1747]

What's a good price if I ask a shop to do it? Don't want to get hosed.

[@NickGT]

My tuner offered $1200 to install the supercharger, manifold, and fuel upgrades. Honestly it's not a bad install if you know how to use tools and can read instructions. Wasn't worth paying someone in my opinion

[@kylepiacente8492]

Did you install the snorkel back on?

[@NickGT]

I forgot to put it back on at first but it does fit back on

[@AlexCr0ss]

This kit came with an oil cooler?

[@chrismbroome]

Still got the original battery 😯? - mine i had to replace after 3 years

[@JasonHoogerhyde]

Still have my original battery from 2013, but I noticed it struggled starting the car this winter on a few occasions. Might not last until next winter.

[@851995STARGATE]

@@JasonHoogerhyde yeah I swapped mine last year with an agm way better cold starting with e85 too

[@DavydB]

Whats the difference between the c30 and c38 supercharger? Isn't the c38 the upgraded version?

[@DavydB]

nickgt350R so the c38 has more power at lower rpms?

[@ericwhelan4433]

How's the reliability been with this kit?

[@NickGT]

Its been very reliable. No major mechanical malfunctions. Only issues was a blow by issue that was fixed with cleaning out the intercooler piping and adding a catch can

[@jacobaugustin8420]

Hey buddy, how’s the car running I just ordered mine!

[@jacobaugustin8420]

nickgt350R good to hear man, it’s my dd and I’m going with delicious tuning, I have the borla UEL and muffler delete and it’s pretty loud lol, did the supercharger make your exhaust a lot louder?

[@arturovazquezmacia4047]

Price??

[@GETREALLYRICH]

What's the 0 to 60 time?

[@NickGT]

The ecutek app that reads off the ecu timed it at 5.2 seconds on a 50 degree night on the street. Perfect conditions it would be capable of high 4s

[@GETREALLYRICH]

@@NickGT thanks! Is that with the kit tune and basic pulley making at around 280hp?

[@NickGT]

It has a dyno tune from xero limit on it, stock pulley and makes 247hp at the wheels

[@NickGT]

There's a video on my channel getting it dynoed and doing pulls with it at the end if you wanna check it out

[@ssikrats]

DOPE!!!

[@danielchavez6494]

Supercharger? Or turbocharger

[@wow45usr]

Daniel Chavez it's a supercharger

[@opticchinochino3204]

Do your rims 18x8.5 +22 offset wound fit on my Stock Frs? !!!!ASAP!!!

[@dr.dodrugs8963]

Your fender size doesnt change with mods bro. unless you go widebody lol

[@dr.dodrugs8963]

18x9.5's on my 86 fit just fine.

[@opticchinochino3204]

nickgt350R I need help whats 22 offset? And can't decide which rims to go for, my frs is all stock suspension and coilovers, so would a rim 18x9.5 fit or do I need to do suspension or coilovers??

[@opticchinochino3204]

nickgt350R and what's the difference between a +22 and a +35 offset?

[@opticchinochino3204]

nickgt350R I'll just go for your set up 18x8.5 +22 bc I saw your vid and they look great like wide they stick out a lot!

[@kgthegreatone943]

well? is it stupid fast ? ? ?

[@kgthegreatone943]

dude! sweet!

[@kgthegreatone943]

yes!!!

[@droctoganapus125]

Do you have an upgraded throttle body?

[@chevyknight8441]

What injectors did you use for your car

[@NickGT]

700cc

[@danielchavez6494]

Supercharger? Or turbocharger

[@NickGT]

Supercharger