SETTING BASS BOOST ON YOUR AMPLIFIER

[@JacobViral2]

THANKS FOR WATCHING and SUBSCRIBING! MORE VIDEOS TO COME! ➡️Shop Audio: amzn.to/3lqomCw​ & ebay.us/6vdEev Join me on Media➡️instagram.com/JacobViral/ & www.tiktok.com/@JacobViral & facebook.com/JacobViral/

[@vanessagarcia5777]

Bro only one 10-inch speaker come on step it up. I got 2 15" Rockville Punishers 10,000 watt amp running it. GET SOME.

[@fredricowolfe8037]

Don't listen to dude you suppose to turn your bass boost up and turn your bass of on your head I noticed when u use your head for bass it causes a lot of distortion

[@miket2607]

Ah man. This brings back memories. I remember in high school I had one of my first systems I put in. Cvr 12s. I was showing it to my buddy and I remember saying this, “Oh, you think that was loud?? Just wait til I turn up this bass boost.” Haha. Ah the younger me lol.

[@braap6085]

I have a crv rn and I have one 12 inch sub in class t 😂

[@anglerandy5736]

@@braap6085 class t amplifier? Which one?

[@braap6085]

@@anglerandy5736 I did not mean to say class t 😂

[@TrulyHumbleUnderGodYSL]

@@braap6085 lmao you on that crack g 😂

[@braap6085]

@@TrulyHumbleUnderGodYSL Na og

[@californiajack1244]

Custom EQ on the headunit you can add or decrease db at different frequency on your pioneer 80prs

[@GuitarHeroGage]

The main use for bass boost is for head units and LOC's that don't provide enough pre-out (RCA) voltage. For example: Your head unit full tilt only puts out .4V at 40hz, but your amp only accepts .5V or higher, you can use the bass boost on the amp or head unit to amplify that .4V to get your desired gain on the amp. I've used it many times setting up systems with trash headunits because people don't want to replace them. My buddies JVC head unit would do .4V, with the gain maxed you would only get 15V on the speaker outputs on his Skar RP2k, when we set it to 6db bass boost, it was able to get to the desired 44.7V easily at around 3/4 gain with a clean wave, if the amp is made by a reputable company, they do a good job of keeping the wave relatively clean in that situation. But I HIGHLY recommend having an o-scope, because the signal can easily clip.

[@jr3870]

same i got 12x1 evl sub with 1500d mono skar amp along with kit i mean im thinking to turn on db its off so far i feel like 6 db resonable but 12 no no no , mine so far at 0 but i feel like when i turn on 6 db my hair start flyin in car lol i still dont get it man how this thing work but best on car audio world they usually turn off db unless competition let the windows shake for couple minute 😂😂

[@DX-jn6mr]

can you help me please? I have 2 12” skar sdr with a rp1200. it’s in a 2018 charger with the stock touch screen radio. i have the amp bass boost off but i like it better set in the middle at 6db, and when it’s at 12 it’s just too much. is it okay to do that or no? thank u

[@sethglenn9022]

I noticed a MASSIVE difference in the bass extension and clarity of the bass after I set my bass boost to the 12 o'clock. I have a 12 year old MTX RFL600D that I bought for my first car and it plus a single 12" would vibrate my mirror down with no bass boost (but I used the remote level so I guess I did technically) Years have passed and this amp has been in 2 other vehicles And I lost the remote level control. No matter what I did to the head unit I could never replicate the performance from my first system. Now its +6db and sounds as good as I remember. This amp has no business living this long, but it just eats up the power.

[@masterdebater8757]

@@sethglenn9022 unplugging or removing a bass knob is the same as it being turned all the way up.. So the function of the knob is only to turn the amp down, never to turn it up. The reason your now at +6db bass boost is just like every other basshead you want more over time and thus risk your equipment to get it.

[@KdubTraX]

@@sethglenn9022 hell yeah bro

[@rawbasicrawbasic]

Explain to me one thing if everybody says don’t use it why does the manufacturer make it with that setting on there

[@chrispratt498]

Fr tho!

[@jasonlevesque9303]

Because a lot of guys tune their amp wrong when actually the radio head unit has the worst clipping points. 🤣🤷‍♂️ if you tune every thing and never turn your head unit volume level to high to the clipping points you should have no problem turning everything else up and just get a bass knob for your amp and there's your gain for your amp and speaker right up front with you. 👍 my radio clips and max out at levels 34 and up on the volume so I set my amps and everything at my head unit volume at 25-32 max, and any song and any type of music plays clear and clean on my system. 👍 remember your system is only gonna sound as good as your volume control and levels on your head unit, if your head unit clips everything wired to it is gonna clip. 🤷‍♂️👍

[@bigchungus-oj8zz]

I believe it’s a feature that if the manufacturer takes it away, they’ll lose more potential buyers than leaving it there, because the myths of it’s value persist.

[@nuwavee4eva]

Setting your bass boost to 0 sounds like you don't have subwoofer installed. :)

[@nealj2617]

@@nuwavee4eva that's completely wrong. If you have your bass boost down and you don't have bass you better check your install, cuz something is jacked jp

[@JP-rf7px]

A an audio engineer, we use thousands of dollars in equipment and acoustic treatments to deliver the most accurate representation of what the sound is in the studio as we can. This includes ACCURATE and flat low frequency response, usually to below 30hz depending on the music. You should try to equalize that 40hz peak down to as close to flat as you can recognizing that the car structure is causing it to peak artificially. This is why so many cars, when you listen outside have that "one note" bass thump, thump. That's not accurate reproduction or being true to the artists desires. You will never hear this in a studio control room or in a properly set up live concert system. Your HI Fi has just become Lo Fi-delity.

[@LearningFast]

Bass boost is actually very useful for what it is intended for. It increases gain at very specific and limited frequencies. If you are willing to give up some amplitude on all other bass frequencies in order to increase amplitude for the specific bass boost frequency then by all means use it. It will give you increased bass for that limited frequency range. However, most people wouldn’t want the very peaky bass response that bass boost gives you. Therefore, they would turn this setting off. If you are going to utilize bass boost then you absolutely MUST set your gains with the bass boost turned on.

[@ryanmalinovsky6504]

This, plus I could see someone using this in competition (if allowed) and if they have a box that is designed to play that center frequency very well. 🤷🏻‍♂️

[@fredrichgordon5244]

I just learned something thank you. I'm gonna do that today.

[@TheCompleteConfusion]

Dude, the way you have your truck set up with all the equipment is bad ass. I love it

[@JacobViral2]

Thanks man! Stay tuned more system updates coming weeks :)

[@matthewjustice3383]

Not everyone listens to their system at volume all the time. When I do I turn the volume up I turn my boost down. With just everyday driving my system sounds great with the boost at halfway. Of course with my gain set right.

[@johncampagna645]

That's it👍👍

[@nuwavee4eva]

Simply saying, adjust the bass boost the way you want it.. that's why the knob is there.. It makes sense.

[@semajkeaton331]

Thanks Jacob!!! I was wondering why it felt like I was clipping wayyyy to fast thanks 1000 times over

[@highvibegardens]

Im just getting back into car audio after 10 year from high-school, and you've helped me in so many ways, ive FINALLY got my amp tuned perfect with NO BOOST, on amp or headunit as well as all bass signal there turned down, my LPF on my amp, matching the 80hz output of my headunit, and got the gain tuned in just right, and not only is it leaning more SQ then SPL now, it even seems louder, yet more crisp. All in all, thanks a ton boss! About to do a FULL kicker build 🤙🙋‍♂️

[@lightfusegetaway]

I think the use of boost is almost enclosure-dependent. So my understanding is that bass boost on my JL JX1000/1D only increases gain on a curve around 45 hz. So I'd treat this like an EQ where I turn down gain as I turn up bass boost. I have a 10" Dayton sub in a small ported box of around .87cf. In this situation the boost is almost necessary to EQ out the lower bass that is lost with the smaller enclosure. If you have a giant box like yours, boost is superfluous.

[@wiillthebarbertv9415]

Agree!

[@user-jv8yu7ld7b]

I had to go back to your video watch it again to get it to my head to turn the bass boost off it was up a little bit as I didn't notice but I noticed it when I listen to it so I watched your video again finally got it through my head thanks again man you solved my problem

[@yeethaw4895]

using bass boost on the amplifier and cranking the lows in the head units EQ is awesome and I recommend cranking it up on both as the starting point....BUT....you need to do it correctly, you need to tune your system with all of that on, basically what I am trying to say is when you're tuning it and checking for clipping and getting it locked in make sure you got everything you might use cranked on, what is cool about this is if you want to use your system in the early morning and don't want a ton of bass or during quiet times all you need to do is turn down bass boost on the amp or set the head unit EQ to flat, if you wanna play it loud for bass boomin or show someone what it is capable of simply just turn it all back up to it's "original" tune/full bass boost. The reason it gets shit on so hard is because people tune their systems with it all set to off or "flat" and then randomly one day they try turning up bass boost or raising the lows in the head unit EQ without tuning it to that and it starts clipping and getting all messed up.

[@rogerdavis9607]

I did not know this . Will be adjusting thing tomorrow for sure.

[@FinsleysCustomCarAudio]

Shut bass boost off?

[@jonathanmayberrydesigns]

best video ever. others could really learn how to make good videos by watching this. DIRECT to the point, no BS, and video goes on if you want more info. Well done my man.,

[@californiajack1244]

Bass boost can be useful. Most people say no bass boost because it CAN most definitely clip your signal. Alot of people tell noobies not to even think about it

[@emzi-_-]

I used my subwoofer at max bassboost at the beginning in like 2 months, nothing scary really happened. So i dont get him saying to not use the boost

[@RosaSanchez-or1ql]

@@emzi-_- yeah he keeps saying its bad but not getting distortion, just more bass at lower volumes.

[@apexdisease6030]

As said in the video, I think bass boost becomes an issue usually when trying to get the most out of the system (high bass boost, volume and gain). It seems to me that it is all about knowing your system's capabilities and making sure that you balance the three different kinds of volumes (the bass boost, gain, and the regular volume).

[@stevenclarke5435]

They tell us noobies what? Don't think about what? You got it bro we can't think about anything with our brains vibrating in our skulls like this anyhow.

[@stevenclarke5435]

You're right, know your systems capabilities. I prefer to determine the capabilities by exceeding them greatly then buying the exact same amp and returning the one that smells like burnt semiconductors and plastic like I never even opened it lol. Idk why it smells like that bro just give me my money back. Usually by same amp number 3 or 4, I have determined its limits and only pust them about 5% past that. Rms.

[@jms7585]

Here’s how you set your bass boost: DON’T!

[@Lahotboy2024]

Wonder why they put it there if your not really supposed to use it ???

[@lokness42]

Can i chime in as a music producer. We typically cut in the bass area. Like in all actuality before mastering we cut the bass to about -9db. To allow for headroom. Because the most energy is in the bass spectrum. So really you can set your bass to negative whatever. Then adjust your bass boost. You're leaving out most hu just have bass mid highs. That's alot of bass spectrum to control with just bass level. To tell you something about eq... there is actually sub bass, bass, low mids mid high and highs. Your SUB frequencies are roughly 30-80. Sub frequencies are felt n more then heard.

[@zrafferty]

Main objective of boost is for when you set your gains with a 0db track and the songs was recorded on a -5 or even -15db track. Its to help compensate most dsp use same technology to help this as well.

[@GlideST]

Thanks for the straightforward video, it was 100 correct for my case...lowered to 0 set all the other stuff to around 65-75% sounds way better

[@JacobViral2]

glad it helped

[@Kevinb1821]

I’ve been using the same amp and sub for over 15 years now and never ever used bass boost. It’s an old infinity kappa vq 12 inch sub with a basic kenwood kac-7252 500 watts rms at 4ohms bridged. Both still sound good so many years later

[@mattmcgee8046]

Life begins at clipping 🤣🤣🤣

[@briankgopane7629]

It's sad to hear folks critic a functional and purposeful knob simply because they don't know when to use it. Firstly, amps are built to deliver and speakers are built to handle. All of us here can agree that mids and coaxial will clip when bass is introduced that's why we mostly cross them higher with no bass at most; right, the same is true with subwoofers, a 1000rms rated sub for e.g may clip as opposed to a 2500rms rated subwoofer when bass boost is set to a desired level. Essentially bass boost works on subwoofers that can handle it, in my experience a genuine 2000rms or higher. Suddenly a good subwoofer will sound like it's got a company of another producing a tonne of smooth bass output

[@justriaz29]

Totally agree with you mate.

[@stevenclarke5435]

Who in the actual fizuck has 2500 watt RMS subs? Aint nobody pushing that many ROOT MEAN SQUARE watts through a speaker in their vehicle. I have a couple of JBL 1000w MAX (like 300 rms?) Subs that will make you do a double take to make sure donkey kong didn't just punch you in the chest. I'm not saying it's impossible. Just improbable and impractical. Unless you drive around wearing a pressure resistant suit for disarming bombs and shit. 2500 watts at 12v is over 200 amps. So you're either melting cables or you've got wire bigger than the 4/0 used on a 200A residential main electrical service entrance. And given that you do, what about the batteries/alternator? And that's just power issues. All of which will be irrelevant when the entire vehicle vibrates completely apart halfway through song "put on" by Young Jeezy Damn Jeezy....I need an inflatable car to listen to your shit at an appropriately absurd level of obnoxious. 2500 u say? Rms you say? I'm down. Let's tear some shit up

[@fordsukkula3623]

If i turn My loudness off My bass disapears van i use it on low i usually turn My headunit up to 50 at max goes up to 62 deh-3400ub so can i use it on low without distortion? (Sorry for bad english)

[@jahcousteauu_STAYinSHAPE]

Thanks 🙏🏽 I’m changing my bass boost to off… awesome vid…

[@joebloggs4191]

All the videos I have watched say no bass boost but then what is bass boost for and what is the right way to use it? What I gather from this video is bass boost can boost the bass at lower volume levels but if you crank the volume up it can clip the amp (if gains are not re-adjusted after setting bass boost), in which case why not use bass boost for lower volume levels and if you crank the volume up reduce the bass with the bass knob?

[@kristopherdonaldson9569]

Joe bloggs.. very good question! I wish you'd gotten a response.

[@workingclassperson2124]

Your right man just like most audio professionals say don’t use bass boost. But some people don’t care or have bad hearing or don’t know what bass is and should sound like. When I first met one of my friends he was right rocking major distortion cause he thought if I was loud it sounded good. I helped him out and taught him about audio. Then he mentioned his lil brother would brag about how his system blows sub woofers I said ya if you don’t know what your doing you can easily blow speakers doesn’t mean you have a strong amp or it sounds good.

[@johnathanenglish3702]

i’ve been running bass boost for 6 months and everything is perfectly fine

[@briankgopane7629]

So many variables counts when it comes to audio, sadly truth is many times clipping occurs when you try to achieve high end quality with low budget components, fact is bass boost works simply crank it to half then gradually crank the gain with your head unit set to desired loudness, never exceed quarter however the outcome depends on the quality built and reliability the specs from your equipments

[@fernandoramos7679]

never exceed quarter of the gain? Are you also saying to start with bass boost up at halfway and my volume up to where i know i have no distortion in my mids and highs? Then start slowly turning up the gain on my amp, also i have a bassboost frequency on my amp right next to my bass boost on my amp. Where should that dial be set at? could you send me a email? [e-mail] thank you in advance.

[@cultivationplus6719]

Source level isn't a "bass boost" per say. It's just a level to balance difference source outputs. Example - cd may play 5 "clicks" louder than Bluetooth. That level adjuster makes it so the output on each source is the same - to prevent damage when swapping sources

[@Marz-px6vx]

I use an amp that has a little less power than my subs rms then I can use my bass boost with out causing any harm. I've done it like this and never had a problem and I had the same subs and amp for 5yrs. I'm not an expert but I know a little.

[@lowridr2]

good point

[@christopherswanson1628]

I'm using bass boost, but not much. No problems with clipping

[@user-jv8yu7ld7b]

You rock brother you answered my questions perfectly

[@JacobViral2]

Glad to help and thanks for subscribing!

[@pyrosaxplayer12]

Can you use Bass Boost knob as wave "Normalizer" and then set Clipping points with Gain/Volume knob? Some songs dont have the same volume level on lowere frequencies. School me in an alternative in Normalizing every songs

[@akuma4u]

Do a video on clip light indicators and how accurate they really are and if a little flashing is OK or if it should be not flashing whatsoever.

[@JacobViral2]

Noted for a future video thanks for watching and subscribing! More to come 👍

[@2ghettoTim]

U rock ur volume at 20, if I bass boost, and turn my loud on and adjust everything up, mids and highs, but I keep my bass at 2 and sw at 2 on my deck its loud and clear on 10. Its hits harder bass at lower volumes. The louder I turn up the clearer the words but bass isn't as tough. If I keep everything Flat I have 2 turn up 2 30 and still don't get the clarity and bass I get at lower volumes. So I assume it personal preference and or what your running. I have a boss double din, and an Audio pipe 15 in a side port box, I had a 1000 watt boss riot amp I blew up. My back up I had was an eclipse 200 or 400 watt amp. 1st day i blew the 20 amp fuse, put in a 30 amp fuse and this bangs hard. I bought an Audio Pipe 1500 watt amp but haven't got it put in yet. So I think this will be scary loud. And now bring up bass knobs, I do not use right now. But new amp has 1. Isn't that gain, or bass boost? All big systems I see on here have that huge bass knob. Hey into that concept. Amazing videos.

[@rigormortis2814]

He only rocks his volume at 20 for testing purposes. To keep everything consistent. When you say when you turn your volume up the cleaner the words are but the bass isn’t as “tough” doesn’t make any sense to me. At this point the subwoofers should be over taking your door speakers. I’ve heard of this but only on factory radio head units that have that bass roll off.

[@factsover9220]

If you are going to use it simply turn the gain down. It will prevent clipping

[@JacobViral2]

Yes 👍

[@moderngunguy3666]

I used to run with everything turned up I'm going back to that nowadays sounds way better

[@kitchenrenovations8284]

Hmm… people won’t use bass boost but they’ll happily tell you that you need a parametric equalizer to flatten your frequency response. Guess what - they’re the same! All bass boost is doing is amplifying a range of frequencies. Provided that your gain is set appropriately to ensure there’s no clipping Play a 200hz sine wave and set your gain to avoid clipping. Use an oscilloscope. Now play a 50hz test sine wave. Does it have a lower peak-peak amplitude? Sure it does because your stock amp is probably rolling off low frequencies to protect the crappy stock speakers. Now how to boost the 50hz amplitude without clipping on the 200hz signal? You need to boost just the lower frequencies using bass boost. Add bass boost until your 40hz signal is the same amplitude as the 200hz signal and not clipping. Now double check that your 200hz signal is still clean. If it isn’t you can turn down the gain just a little - it shouldn’t need much. Congratulations - you have used bass boost to compensate for low frequency toll off of your head unit. Your bass should sound more accurate because your frequency response is flatter - which is what everyone is trying to achieve with dsp parametric equalizers.

[@fherraul5287]

best explanation ever

[@user-jv8yu7ld7b]

I'm rocking big time I just wanted to thank you again dude I mean I'm slamming hard with all the money time and effort I put into this finally come alive thanks to people like you putting out these videos for people left experience like me they really helped me out I mean I got like over two grand and all this stuff and that one little adjustment wasn't all the way off and it was killing me

[@JacobViral2]

Your welcome Jeff 👍

[@RiddledEnigma93]

Bass Boost can be useful if you know how to use it!~ I have noticed a BIG difference with it off vs on, the bass was just not there as it was with it!~ Plus I tuned my stereo to resonate with the vehicle to sound like a concert!~

[@iamonearies21]

To Each it's own when it comes to bass and your systems.

[@25hztolife86]

My number one rule is no Amp Bass Boost.

[@nickxcaliber7991]

That’s why your not loud

[@jesseanderson1484]

@@nickxcaliber7991 i dont use bass boost and im doing a 151 lmao try again

[@germanywho]

He talking about no bass boost but he got a bass knob👎🏼

[@jesseanderson1484]

@@germanywho bass knob isnt bass boost.....i used an o scope to turn the gain up and make sure its clean and the bass knob just controls the voltage input to the amp to make it to where you can turn it up to where you set the amp gain or pull out input voltage by turning the knob down

[@bossmane434]

jesse anderson 💪🏾💪🏾💪🏾

[@danielhildebrand6553]

I miss my old Eddie Bauer explorer. lol now im living my nostalgia in a 98 4Runner. They tend to run a little be better lol

[@rawbasicrawbasic]

This is what I found ---Bass boost is a feature designed to boost the low range frequencies. It's typically used for subwoofers, however, can be very touchy and dangerous to use.

[@sleet4947]

so how can it be used without being dangerous

[@rawbasicrawbasic]

@@sleet4947 I’m trying to figure that out myself

[@sleet4947]

I need answers to my question lol

[@rawbasicrawbasic]

@@sleet4947 😂

[@rawbasicrawbasic]

As many have already explained, bass boost is increasing the gain for a band of signal (say from 50 - 150 hz) as Greenhorn mentioned its usually to compensate for poor response of our ear to low frequency sound. However bass boost has an effect on how high you can push your source (stereo) volume before it clips

[@sabastiankimball494]

Lol my brother in law has out 3 different sets of subs 10s 12s trying to get more base no shop could do it. I turned the base boost up and adjusted the gain and it hits so hard he almost bought a w7 13” cuz it wasn’t enough base but after I adjusted it he’s happy as heck

[@kwacz]

id be very interested to know how you determined by this test that bass boost makes the soundwave dirty as you called it. You dont have an oscilloscope so you dont have any way to know for sure what the waveform is that the speakers and subwoofer is getting. Clipping and dirty waveform are not the same thing. Clipping is caused by your amplifier running out of headroom and the amp cant output enough power to create the whole sine wave so it clips. Clipping is easier with bass boost on because you need more power because the bass is louder but it is not the cause of bass boost on a properly installed sized and adjusted system.

[@iceekilla6013]

If u set ur gain properly with the voltage to match ur source unit output and u need more juice use the bass boost. Don't just turn ur gain up more. Again set ur gain to match source output not by ear. Then u might need the bass boost.

[@RaulGarcia-gq9vv]

I've always used bass boost never had problems or damage with speakers guess you have to just have the wright system

[@ThA1-One-mike]

Just got some 12in in my 98 civic and there bumping 2500watts thx for the tip sounds more clear

[@philipeli1192]

Bass boost is a 1 band eq in a sealed enclosure,very useful,but never in ported!

[@NathanC-YT]

My head unit is set to go 35/40 and my bass boost and loudness is all off on it but my amp its on and at full blast it sounds fine and i have not noticed anything bad yet. Im gonna turn it off and try it and set my gain again. Ill report back

[@adammuise6178]

Awesome video and information. I was looking for information on how to tune my amplifier. I just bought 2 twelve kenwood excelon subwoofers and a kenwood excelon amplifier.

[@JacobViral2]

Glad to help thanks for watching and subscribing!

[@Rudenutts]

So if your competing turn everything up! Gotcha👍🏼thanks 😜

[@MarkSegree]

Its recommended to leave it at 0 so people dont blow their systems. If tuned right, bass boost can fix many systems safely thats lacking bass. Why does your system lack bass? Because your head unit did not have a subwoofer rca output, this is the case with most line out converters. The bass boost can be tuned with a oscilloscope to ovoid going in clipping, if you dont use bass boost for some head units and line out converters, you will never have effecient bass. Eg. I ended up pulling less power to make more bass by using bass boost. In otherwords, my headlights stoppped clipping

[@Daniel-pb9ff]

Thank you so much!! This has helped me greatly

[@JacobViral2]

Your welcome Daniel thanks for subscribing and watching!

[@benignocruz6127]

Just tested mines and it sounds better with some bass boost

[@dannyarellano86]

I have the bass boost down and off on head unit, but I have a LC2i the levels on there are maxed, would that affect anything. If the bass is lowerd there. Then there would be zero bass

[@nS-kk7ht]

Bass boost set to maximum.gain halfway.LPF at about 60Hz.tune your sound and see what works for u.dont listen to this guy in the video talking rubbish.everything on the Amp is there for you to use.

[@jasonlevesque9303]

You're correct, if your radio volume is to high and clipping then your whole system is gonna sound like garbage. 👍🤷‍♂️ lower head unit volume and higher amp settings. Know your head unit limits 1st , then tune your system to that maximum volume of your head unit. They don't call it the HEAD UNIT for nothing. 🤣 it's the leader of the pack. What ever is wired to your radio is gonna sound how you set your maximum volume. If your radio clips everything else sounds like crap. 🤷‍♂️👍

[@rehan_4787]

Hello sir good information.sir which one is better car amplifier and bass tube inbuilt amplifier which one better bass tube .car amplifier ? Best sound quality please help thanks 🙏🇮🇳

[@swiftgamerfan4474]

So I have a 3000 watt planet audio 1 ohm class D monoblock amplifier I have everything set as the same on your amp and oh my God it bangs bro.

[@barbie_ava6055]

hey dude great info as I just got myself a new q class kicker l7 12 inch subwoofer. and don’t wanna do silly things. so big thank you and I love your videos👍👍

[@sanj5026]

How is the SQ on that woofer?? I really want it

[@LTSRIDE24]

@@sanj5026 not bad for being a Kicker, but the square woofer design is absolutey dumbfounding from a science / physics perspective! I'd greatly suggest the standard round comp Q tho for better sound / performance & of course staying away from pre-fab enclosures & ones tuned over 40 hz!

[@PracticeMakesPaper]

@@LTSRIDE24 The square L7 (900 Watts) is more powerful than the round..

[@bigchungus-oj8zz]

TY for the demo of bass boost. Subd.

[@marcusandkristinecavitt758]

I've always had mine up and then I go negative on head unit sounds clean to me kenwood double din set at -20 for sub level and -8 on overall bass sound is very clean until we get back to flat tweaking on bass heads

[@thechronicgrump3906]

If I don’t use bass boost my lows don’t even show up that good

[@briannash7960]

Hi Jacob I love your videos, I do have a question if you can answer it for me, I had my system installed this past weekend and I wanted the guy to wire my 2ohm dual subs down to 1 ohm, I watched him wire them and I think he wired them wrong, he put 1 wire to the positive on 1 side of subs input and the other end he put it to the negative connector on the other side of sub, and plugged the remaining wire that connect from box to amp to the remaining positive and negative terminals on sub, I believe he wired them in series, aren't you supposed to run a wire to positive to positive and a wire to negative negative to negative and then the wire from the box to sub, POSITIVE and negative? Thanks

[@JacobViral2]

Sounds like you need to cross reference and double check everything’s good, plus use a multimeter. Here’s a DIY Wiring video I made: kzbin.info/www/bejne/aZXZmaujoaeWnMUsi=ZrrQNd5GNTJFCZXA ; if it’s 2 subs D2, only possible to be at either .5/2/8 ohm.

[@bigmoney8756]

I don't know about the bass boost but I know the gain would blow some shit up

[@majesty_tv2744]

Good thing or bad thing ?

[@pistol-packing-pico]

My Amp is going into protect mode couldn't figure it out so then when I turn down the bass boost it stopped now I can listen to all the songs I want but what was it doing that was causing it to go into protect mode can the bass boost change the impedance

[@lagginswag]

Overheating due to more voltage probably

[@Rob-cm9jr]

I'm running a 400watt rms kicker R 10 with a 300watt rms dual class D amp. If I set all my adjustments to max it doesn't distort at all. Maybe I need a 1000watt amp set to 3/4 gain.

[@mista6187]

😂😂😂

[@AudioHolic1]

I always thought SLA was source level adjustment which was used to equal out the volume of various sources like going from FM radio to USB , and your USB isn't as loud as the FM radio ?

[@AudioHolic1]

kzbin.info/www/bejne/p3e2o3SQi9mnn6M

[@akuma4u]

thats exactly what it is

[@AudioHolic1]

@@akuma4u I was wondering because I use my usb as my main source of music and I keep it at the plus 3 location all the time

[@alanray7177]

thats what it is for sure ... says so right here in my owners manual of my new kenwood .. so yes its for keeping all the levels the same ..

[@akuma4u]

@@AudioHolic1 i use usb as main source for music too BUT ill tell you this. In the beginning, i did what you are doing too. I would put the SLA on 2 or 3 out of 4. BUT later i found keeping it at 0 and instead adjusting the gain properly, will make it sound better and cleaner and you can go all the way to almost max volume. With SLA, i found that i could get to max volume at lower volume levels. The proper way to set gain is to have everything flat and be able to play at almost your max volume without any major clipping. SLA can cause clipping easily if you are not careful. Try keeping it at 0 and redoing your gain.

[@anthonyreddy2834]

Where can I purchase a center console like that? Just kidding, thanks for the tutorial 👍

[@AntonioLopez-jn7ry]

I'm gonna try that cause I have 2 zv5 12s and a scv 6000 and its clipping alot

[@apexdisease6030]

It's all about the balance between volume, bass boost, and amp gain

[@fishrsa9046]

my head unit is quite old, it has a 5 band eq, i set band 1 and 2 as low as they can go -10, that way my two old mids that run off the head unit directly don't distort until very close to max volume, and i'm hoping that helps clean up the signal to my amps too. my amp tho, the "bass boost" is like a volume knob, all the way down turns the amp off, and around 50% is as loud as it gets, past that it doesnt get louder so i'm assuming it's clipping so i never go that high. i have it at about 25% now and it's not as loud as it can be but i feel a lot more confident that it wont be clipping like that

[@workhorse_3239]

My bass boost been up on 12db for like a yr or 2 I'm never clipped my sub amp but my 4channel blow the hell out of my mids and highs that boy be clipping 😂😂😂

[@liljayydagoat1124]

A shop blew my sub I️ didn’t notice they turnt up the bass boost on the amp

[@dorianarias3542]

He was really direct and he did say a lot but repeated a lot of the same things. I guess it’s just for the ppl that don’t listen and when they hear the same thing over and over it finally clicks lol.

[@gingieona4006]

Just bought new 12’s two of them hook everything up and turn the bass boost all the way up and my bass maxes out at like ten so I have yet to try this because I stripped the positive battery but so I’m gonna go get one tomorrow so I’ll try it with it off and see if it’s louder

[@apusista]

Hey thanks so much for this, I will try it tomorrow. For me, it's getting the bass right. The Amp is on my active 2 channel Sub... so I'll reduce bass boost and increase Gain. When I was tuning it though, I read that I should select a Frequency and that Bass Boost would then boost THAT frequency and below. It's sounding great but why not try 😊

[@JacobViral2]

Your welcome glad it helps

[@klachi7]

Quick question is Bass Boost the same as Bass EQ? I just got a new Alpine S-A60M Amp, and I'm trying to tune it. I have a very basic set up so any help would be truly appreciated it!

[@JacobViral2]

Some amps will have a Bass EQ(boost) with the boost frequency , same concept i say yes

[@p4ldurazo]

It works hand-in-hand. You spend your hard earned money on expensive equipment and take the risk by using the boost. Now common sense would tell you, if the gains are set properly, use a DD1 to detect distortion and none is found when using some boost you should be okay right? And it goes back to what he’s saying , use the boost and the risk of damaging equipment imminent 😅 ... if someone is having to use the boost with the gains up as well , does it mean their sub is underpowered ?

[@paulromero9813]

What's the point in the bass bossed knob on amp then!!!

[@akuma4u]

because it still can be used when used properly and safely. but most people dont use it because its not really needed.

[@juanpestrada5231bdndjkdn]

Akuma4u on my old school Rockford fosgate amplifiers l like turn the gain almost all the way down and turn up the bass boost it seems to work bery well for me just saying

[@workingclassperson2124]

It’s a gimmick for teens and newbies . The company’s don’t care if you ruin your speakers/subwoofers they just want to sell product. But it’s your money do what you want with it. Use bass boost even though 95% of audio professionals don’t even know why amp makers put it on there amps.

[@akuma4u]

@@workingclassperson2124 there is a need and use for bass boost. For eq purposes. Often people tune their boxes way too low and the 45hz region needs a lift. The bass boost dials on mostly all amps is a 45hz frequency with 6 to 12db of gain. Using this for eq purposes is common and many people do it to bring more balance to their bandwidth. Of course, it must be used usually 5db or less or else it can induce clipping quick.

[@akuma4u]

@@juanpestrada5231bdndjkdn have u ever tried turning bass boost all the way down and instead your gain up? I have a feeling your box is tuned very low. Is it?

[@ChitoWorld]

The remote wire controls the bass boost right? Easier access from the driver seat

[@apexsmith3491]

Yeah is that okay to change or no? Is it the same as bass boost?

[@johncampagna645]

I turned my gain down with bass boost half way and it sounds way harder and cleaner so too much gain will clip when you use boost

[@apexdisease6030]

I think that's how it works. That's basically what I do

[@kingbutters2721]

So I have bass boost all the way and sounds really clean ?

[@johncampagna645]

Depends on the amp u use and I did the big 3 and it helped alot.im using a nemisis Brazil board 3k amp so I've got it running 4 ohms on 2 cvx 15s with 0 gadge and the amp is so powerful that I'm running 4 ohms and it's tearing up my ride still 💣

[@rigormortis2814]

Typically if I don’t have a bass knob I will use bass boost. I typically set it to about a quarter or half way but never past that. Then I set my gain. If I have a bass knob then I set my bass boost to 0 and set my bass knob to where I’m going to be playing it at. Usually like 3/4 of the way. Then set my gain. Other then that I normally don’t use bass boost either.

[@stevenclarke5435]

Word. What I read was that you "typically, usually, normally always use bass boost or a remote bass knob. Typically....probably. Lol im just fucking with u bro but the whole thing just read funny as hell to me. It's like 2am and I'm stoned. I don't usually always typically never really sort of use that bass boost shit either lmao..... But IT SURE COMES IN HANDY when u want to piss off your neighbors or some old bitch at a stop light. or scare the shit out of your wife/kids when they fall asleep in the car. Hey, if you blow an amp, buy an identical one, switch the bottom plates that have the serial numbers on them, and take that mfer right back to the same store. Still stinkin to high heaven like an electrical fire. Then turn the boost up on that bitch and go about your merry, obnoxious way. All this video did was make me want to give that knob about another 1/4 turn and put some Jeezy on and ignore the uppity party pooping condescending know it all who made this video.

[@RickDaGoat89]

Damn you explain this really good in turning my bass boost down . Because I clip out when my volume is at 31 mark

[@JacobViral2]

Your welcome thanks for subscribing!

[@loganliam1319]

then how does your system sounds like now at 11-21 volume?

[@abelfelix2300]

After watching this I turned my boost down thank you sir 🙌

[@JacobViral2]

glad to help, thanks for watching and subscribing!

[@DiscoBoogieNJ]

Listening to the video in my car, my sub is booming! Lol

[@FinsleysCustomCarAudio]

In the thumbnail, what would you say your subsonic is set at???

[@FinsleysCustomCarAudio]

Straight up and down. What hz would you say?

[@JacobViral2]

29-31hz 12 oclock

[@DASamX5453]

I don't have my head unit set at 52...thats crazy and would take forever to get the volume up. I think my Kenwood only goes to 40 anyways and my max is about 25. I do a lot of turning it down at lights or around the neighborhood..don't want to advertise and I do a lot of Hwy driving...

[@armandomorenoromero8531]

i dont get as much bass with just the gain☹my amp is a cheap blaupunkt 3000.1D and the bassboost rocks the woofers

[@nickyoung3039]

You just earned another sub

[@JacobViral2]

Welcome to my daily videos 👍🔊

[@basstester2292]

Me who have in that bass boost a 20 db max 😂😂😂

[@TheLawlessGang]

i use bass boost 1/4 of the way up gains set good i needed to tho i dont have a bass remotr knob and im running to a stock

[@kumaresanduraisamy2855]

Good effort buddy... I have a query, kindly answer it on your free time. Am from INDIA and am planning to fix an amplifier in my car. In this video you advised to keep the Bass boost level as zero, so no need to buy an amplifier with that bass boost, gain settings ?

[@JacobViral2]

Most amps have it but if it’s not included it’ll be just fine correct

[@kumaresanduraisamy2855]

@@JacobViral2 Thanks for your inputs jacob

[@giosant5327]

True it starts to become a saw wave w bass boost

[@rottmanthan]

last amp i had that bass boost control didnt do anything with the remote plugged in.

[@tomaskobel3446]

Lol, SLA is not a boost. It's to equal the volume between media types so that you're not louder with one than the other. You don't want your radio to be way louder when you switch to BT from FM, for example.

[@ronaldomaynard4816]

No bro, I got the same deck. The sla is constant thought all sources. The sla changes the rca out put voltage.

[@chrisandshelldale3270]

Boosting it with phone