Is this a GOOD or BAD quality Miami Cuban Link? Day 7

[@welcomealerion2054]

Hey Braden and Raquel , first I wanted to thank you for doing the giveaways , you are the only jeweler I know who consistently gives back to your customers,even when they give you hate!! You are also the only jeweler I know who gives unbiased opinions and tries to inform the customer, again from the bottom of my heart, thank you.On to the question, I personally have never owned a handmade Miami Cuban so my opinion on the matter, is limited,but I would like to own one one day! The only Chainz I have bought are from Jacoje a 3 mm Miami Cuban bracelet and a 1.5 mm Franco necklace which I never take off. I would love to be considered for the 7 mm 8“ Miami cuban link bracelet. So I can have the big boss girl look but even if I don’t win your videos or gift enough! Happy Holidays,for the last time Thank You Clarissa Oregon

[@HiLife-g9m]

Big Boss Girl Look😂😂😂😂❤

[@HiLife-g9m]

I’ve been reading all the comments and that line is the best 😂

[@Golden_Reaper1]

With smaller tongue is better because you wanna enjoy the look and feel of the bracelet & when wearing any gold piece you always want the locks to almost be hidden with a minimalist look to enjoy the look & feel of your gold. The machine made bracelet looks great and at a glance you won’t notice any differences, 5 width & 7 length would be perfect. Out of all the online stores the only one I trust is Jacoje, you guys are a gem and hopefully will go on for ever delivering quality…

[@WayneYates-dd7xg]

I feel like the link spacing is always a dead giveaway but I am absolutely amazed by the quality of the lynx machine made small tongue piece if I didn’t know I’d swear it was handmade - what a gorgeous piece!

[@carloscepeda7240]

Love jacoje. I have a couple chains and would love to go up a couple more sizes on the Miami Cuban ❤

[@felixcai5675]

I think people should own BOTH and see for themselves the quality and craftsmanship. Both handmade and machine-made jewelry are very high quality and ultimately it comes down to who you purchase the gold jewelry from. As long as the seller is honest and reputable then you can’t go wrong with either option. The tongue looks great on the bracelet in the video and it’s great quality knowing that it is from Linx Resale. I have bought from both Jacoje and Linx Resale (my used 18k 3.2mm Miami Cuban bracelet actually!) and know that as long as you buy from Braden and Raquel you can never go wrong! The 6mm, 7.5 inch Miami cuban bracelet would perfect to stack with my Linx Resale Miami cuban!! Happy Holidays! Felix C. Garner, North Carolina

[@ctk1604]

‼️I just want to say.. I’m a miami cuban enthusiast. Every chain I’ve owned has been a miami cuban. I have always had handmade cubans until eventually I wanted something thinner and purchased a Jacoje 4mm Miami cuban. All I can say is, wow! I was so wrong about disregarding the machine made cubans! Everything about the chain is absolutely perfect. The links are thick, tight, smooth.. literally everything you want in a cuban. I can see why some people would choose handmade over machine made, sure but this chain has opened my eyes to the pros of both. On one hand you get something that was made by hand and on the other you get a flawless chain every time. There’s something for everyone and I suggest if you were like me and felt like there was a stigma on machine made cubans that you branch out and at least see what they have to offer. I guarantee you will not be disappointed.‼️ 7mm 7.5 inch Cody G Monument, Co

[@kadynmiller5199]

I have absolutely no issues at all with machine made! I really like the consistency of the machine made. My favorite size would have to be a 7mm 8 in bracelet. I have a 5mm Cuban necklace that I got from you in 2021 and I’ve worn it every day since. The quality is amazing and it still looks fantastic. This was my first piece of real jewelry that I ever bought and it has been 100% worth it. The 5mm is great for every day wear as it is not too flashy and looks appropriate in every setting, but still but still adds some flare like a nice piece of jewelry should. My own personal preference after having it for a few years would be something slightly bigger like the 7mm now. Wanted to get this exact bracelet as a graduation gift to myself because the quality of my chain has been so good to me. Thanks for all videos you make, they’re really helpful and love my Jacoje piece! Kadyn M Wichita, Kansas

[@da956heat..]

Honest opinion that is an awesome bracelet very well made perfect for an everyday item to wear. As far as the machine made and hand made i believe thats on the persons preference. Personally both are very well made . Props to all the jewelers out there on sharing there knowledge and providing customer's with these beautiful quality pieces..thanks chris y. Chicago ill.

[@johnroscoe58]

Love the Miami Cuban, inquired about a handmade bracelet and was told it would be 14-16 wks. seems like there should be a faster way to get product to the customer quicker. I’ve watched the videos and I realize it takes some time and there not going to whip out a bracelet just for me. There might be a little more love put into a handmade but the machine is also very consistent. Love them either way. Thanks Jacoji this week has been fun and informative.

[@treasureseeker9252]

It has an interesting shine to it. Unfortunately, I don't have a lot of knowledge between those differences to give an opinion. I would like to know some differences myself like the cut, plating, weight, how it feels, etc.

[@michaelgerald9969]

Cuban is super fire. I never had a hand made or machine, I would take either! Would love a 7mm. Much love to you from SC got a couple 18k 2mm ropes from you. Wearing everyday for two years feel like I got a Cuban on

[@homie3137]

There's no difference between hand made and machine made to myself it's all about the finished product at the end of the day. If the quality is there I see no issue either way. Jewelry is something that is supposed to make you happy and if it is a piece of high craftsmanship and you love it that's all that matters. I'd cherish having that 8mm I'd rock it with pride. Jacoje is the best linx as well the transparency is top tier! Hope for much continued success in the years to come and appreciate what you do for the Jewelry game!! Homer C Lincoln park MI

[@_jord__]

It’s so fun watching the back and forth between you two on these videos. Both companies are top of the game in what they do but I think the linx pivot was such a great move! Miami Cuban is such a classic versatile chain on the wrist or the neck! Cannot go wrong! Thanks for the fun giveaways happy holidays! Jordan G. Boston, MA

[@austinstrobel4317]

Never worn a Miami, but I'd lean towards the smaller end I'm guessing! 6mm on the wrist is still no joke, machined or not. Thanks for all that you guys do! Austin Madrid, Spain

[@khnari]

So I'm a huge fan of the Miami Cuban bracelet, especially at the 8-10 mm size. I think on a guys wrist, aside from a nice Rolex, this look is pretty much as good as it gets. I find it's probably the best piece of jewelry you can wear. It's got to be solid gold, you have to feel that weight, and the tighter the links, the better. I like the machine made look because of the symmetry and how straight it looks. I agree about the small box lock. It looks a little fragile. But as long as it's sturdy, then you can't go wrong. These pieces I find are ever lasting, meaning you'll be able to pass them down to your kids and the look will always be in. I would love that 9mm in 8.5 in length. Keep up the great work guys, these videos are always something we look forward to at this time of year. Kosta H Montreal QC Canada

[@exkal215]

Both machine and handmade pieces both look good but handmade pieces do have more room for imperfections and error. At the same time getting a handmade piece can give the customer the opportunity have the chain filed down to different style they want because certain Cuban links have certain slopes on the file. When it comes to the lock, as long as it holds, it shouldn’t be a problem. Thank you guys again. Stay blessed. Richard G Philadelphia, PA

[@RonanPatrice]

Sup Braden, For me it comes down to preference. I think the whole ‘game within the game’ where handmade vs. machine made is concerned, is really just jewelers and enthusiasts splitting hairs. I personally love the look of a decent machine made Cuban link, and I do believe there’s value in the cost difference that works in my favor too - Machine made links cost less if I’m not mistaken. Also, I doubt many people can tell the difference between the two at the end of the day just from a casual glance. When it comes to the bigger size links like 13mm and up, I can appreciate the appeal of handmade pieces where character and individualism is concerned.. but for the sizes up to 10mm , I wouldn’t lose sleep over a good machine made Miami Cuban bracelet/ chain - and actually would prefer it. If I’m chosen, I’d like that 9mm bracelet in the video, granted its an 8 or 8.5 inch length lol Ronan P. Lithia Springs, GA.

[@CarswithMark]

Thank you for your videos they are very informative to those of us just getting into gold jewelry. So far I believe it comes down to one’s preference and values. If one prefers machine made which might be more cost effective and precise or handmade which offer unique craftsmanship and beauty however at a higher price point. I really do love the Miami Cuban links and think they all look great regardless of size. my personal favorite is the 9mm 8in bracelet.

[@lolxd5937]

In my opinion there’s no difference between hand made and machine made. In the end if it’s a quality product and has a nice finish I’m gonna rock it. As long as it’s gold as well😉 I appreciate you doing these giveaways and love what you do on KZbin to help buyers out. Reiss B Columbia, MO

[@Drake_Little]

I love the look of a Miami Cuban bracelet and I honestly like the look of machine made ones better than hand made. The spacing of the links is the biggest difference and I always gravitate towards the tighter links. I agree that the 5-7mm range is perfect for daily wear as they are not too heavy and are a great size for a subtle flex. Keep up the great videos! Drake L. York, PA

[@Ben10.21]

Hey Raquel and Braden wow it’s a gorgeous bracelet. Machine made handmade as long as it speaks to you. It’s all good. A 7mm 8in would be a wish come true your guys are amazing keep doing what you do much love. Benny H Philadelphia pa 💯

[@harrisonv1]

Machine-made pieces can be impressive when done right. But there’s something truly special about a handmade Cuban link. It’s like wearing a story, crafted by someone who poured their skill and heart into every detail. That personal touch gives it a warmth and backstory no machine can replicate. Still, if a machine-made version hangs perfectly, feels solid, and the price is right, I wouldn’t dismiss it. A slightly undersized tongue wouldn’t bother me if it still locks securely. Personally, I think a 6mm at about 7.5 inches hits that sweet spot: substantial enough to stand out without feeling too heavy. I appreciate your transparency and the chance to share my thoughts! - Harrison V. Columbus, OH.

[@RGee93]

Speaking from experience, and owning a Miami made Miami Cuban Bracelet and a Italian Made Cuban from you Jacoje, I’d have to go with a Miami Cuban handmade domestically for a bracelet as it’s going to be something that I see everyday on wrist. For a longer chain like a necklace, I have no preference as the only time I’ll see it would be when I look down my chest. Machine made for consistency, but there’s something special knowing that there was someone behind the manufacturing process, melting, flattening, chaining them together, soldering, twisting and filing to get that beautiful miami cuban link look. In terms of width, 5mm would be preference for a chain and 7mm and above for a bracelet. I wouldn’t go above 9mm for anything as that would cause back issues and my wrist to grab too much attention 😂 thanks for giving us the chance to win free gold! ❤ Ronnie Maui, HI

[@prestong93]

I’ve never owned a miami Cuban but that is my dream. But from the research I’ve done the biggest difference is the spacing of the links. But I prefer like a 6-7 mm Cuban and all the pictures I have seen of them. There is no noticeable difference in the spacing. With that being said for me it may be better to go machine made because there is no wait time and not as much of a up charge for labor. I feel like some people would want handmade because someone put forth blood, sweat and tears into crafting that so there is a bit of a story behind it from the beginning. I’m a little back and forth because I love the Miami look so much i would go either way but small edge on the machine made. Thanks guys for the giveaways. Preston G from Thaxton,Ms

[@mattkeith2974]

There sure is a lot to consider when it comes to machine made versus handmade. I think an authentic handmade Miami Cuban represents the artist or maker, whereas the machine made piece doesn’t have the same heart. Basically it’s bragging rights when it comes down to it. I really like a 7mm in a 7.5-8” bracelet personally. The Linx bracelet in the video is super nice too! Thanks again for another inside look Jacoje team and the give away! Matt K Stuart, FL

[@Jayman_981]

Absolutely love the Miami Cuban look. When all said & done, I personally don't a huge difference. I would try to get the most bang for my buck. I guess it's all to personal preference as sometimes the extra $$$ can be worth it. I would love the Miami look up here in Illinois. Keep rocking the holiday spirit. Jason M. Elgin, IL

[@alohahive]

6.5mm is the best overall width for a Miami! It’s best for anyone wanting to flex or not. It’s that subtle flex we all like. My first piece of gold was a hollow Miami 6.5mm bracelet but after being in the game for a minute 8.5mm is my kind of size FOR ME. Thanks Braden for all you do and thanks to Raquel for starting Linx cause I’m a customer for life! Now I gotta get me a Jacoje piece!

[@Ole5644]

I’m going to be honest, I never saw the big deal of machine vs hand made until my buddy showed me his hand made chain. I just love the filling and spacing on hand made vs machine made. The down side to Hand made is that you don’t know what you’re going to get (off by weight, mm, spacing) which is very risky in my opinion. This makes it crucial to find a jeweler with a good reputation but that often comes with higher labor prices and long wait times from what I’ve seen on KZbin. With Machine made I feel like you know what you’re going to get each time and get upfront consistency and quality. With that being said, the spacing on your Linx piece looks real deal. I feel like especially at smaller sizes the spacing is not such a big deal and it may be harder to tell the difference. Once you enter 10mm plus I feel like the difference will start to show a bit, however gold is gold and what matters is that weight! I would love a 5mm that’s perfect for daily wear! I have never worn a solid bracelet but feel like it would be awesome to daily wear. - Oscar M Hempstead, NY

[@Moto-qe9xq]

I purchased a 6 mm 8“ white gold Cuban link bracelet from Jacoje over a year ago and I never take it off. I just like how the Cuban link hugs the wrist. It’s the best every day wear bracelet. Dustin B SLC, UT

[@maverickUMD]

Hey Raquel and Braden!! I think machine made is the best way to go. As a female, I have a 4mm machine made Cuban link bracelet from Jacoje and it’s amazing. The price and weight were great. When comparing prices for the handmade Cuban links, there are a ton is trade offs you make. Sometimes the handmades are not consistent in the link size, they take months to make and be delivered, and you pay a premium because you have to pay for the jewelers time and artistry. At the end of the day, I’m looking for a bigger Miami and machine made is the way to go. I’d love to add that 7mm to my daily rotation. Happy holidays and glad to see you both smiling and enjoying making videos again! Megan M. Aberdeen, MD

[@jeremyjernigan3653]

Braden love what you guys do every year in helping give back it's one reason I will only buy from Jacoje plus the quality of your products. On the question of machine or handmade I think it all depends on the quality and craftsmanship of the product and you can't beat the craftsmanship of a Jacoje Jewelry. Hope you guys have a great Christmas. Jeremy J Valdosta, Ga

[@Bayboimasterofnone]

My favorite Cuban width is around 10mm and length is 7.25”. I like handmade Cubans more because I like how the links and filing looks. They seam to be a little tighter looking. Also from my experience they focus a lot on the polishing when you buy them. But all hand made ones have a little different style you have to do a lot of research and pick your poison. However some machine made are not bad as those links look good and tight and seem to hang straight too. But machine made are a great choice especially if you don’t want to wait usually months for a hand made one or if it’s 5mm or under. Broderick N. Vallejo CA

[@jadynruimwijk6221]

Hey Braden and Raquel! I personally would go machine made due to consistency and I’m sure it’s probably cheaper. But it is also cool to know someone made your bracelet the way it was traditionally made back in the day. I’m a bigger fan of the larger size Cuban links like the 8 and 9mm. Hopefully in the future I can pick one up from you guys. Keep up the great videos and happy holidays! Jadyn Derry, NH

[@rubenherrera9008]

That 9mm Cuban bracelet looks flawless. I don't see how a handmade could look any better. I would trust that the smaller tongue would have no issues because I know you are all about quality. I would love that 9mm Cuban at 8.5" Happy holidays good luck to all Ruben H Chicago il

[@StaceyB-hb9mr]

I like it! I would definitely wear it, doubt most people would know the difference between machine and hand made.

[@juice623]

My everyday bracelet is a jacoje 6mm rope 8 inch my wife got me a couple years ago for Christmas. It does not come off. It’s perfect size for everyday wear. I wear it to work. The gym. Balling. Whatever. It just works and looks good. This is one of those gifts I will cherish forever. Merry Christmas. 🎄 Julius w Youngtown Az 🌵

[@FAMOUSLEXX10]

Okay Jacoje! I’m going to be HONEST. I’ve always gone with flat curb only for price point. Nothing wrong with them I daily wear a 6mm Flat curb in 14k 24”. I love it. That’s my budget though. I Love Miami Cubans. Goal is to have a 6.5mm Miami Cuban in 14k 24” Chain and a Matching 6.5-7mm 14kMiami bracelet. Im on linx often and love what you guys are doing. Merry Blessed Christmas from the Garcia’s.

[@spiderpig7180]

It’s amazing the tongue is fine! I personally like yours with the diamond claps

[@chriscast9818]

Personally id go machine made 7mm and below. Now if your going for a statement piece, hand made 7mm and up. Theres just something about how the hand made adds an extra flex to the beauty of the miama cuban. I think 7mm would be my sweet spot bc its got just the right amount of presence, not too small and not too loud. Thanks for all that you do! Christian c Land o lakes, fl

[@danvitty5442]

I honestly prefer a high quality machine made Cuban link, mainly because I like smaller sizes. The hand made ones have some amazing craftsmanship behind them and offer some of the cleanest looks, but at the same time the consistency of the machines can’t be beat. Machine made chains are a consistent size all around, and are less likely to have issues with something like the fitment of the box lock. The only thing missing from machine made Cubans in my opinion is that nice hand file, and depending on your preference some tighter links, but I don’t feel that’s required to make a beautiful Cuban link. Plus it takes almost a whole day to make one by hand so the labor costs are much higher. A Cuban link has been a goal chain of mine for a long time so I’d be thrilled to have any size Cuban link bracelet in 7.5”. Thank you Braden and Raquel for teaching us all about the business and doing these amazing giveaways! Daniel V Manchester NH

[@BlotterWizard]

Smaller mm’s tend to be machine, so if it’s a larger mm hand all the way, difference between my 6mm machine to 7mm hand.. id choose handmade no question

[@danvitty5442]

@ I agree for large sizes handmade is the way to go I just don’t prefer the large sizes. But there are certain aspects of machine made chains that tend to be nicer. And most of the sizes he Carrys are within the range that can be done Well by a machine. If you want really tight links though you need to go hand made. I’ve seen a couple companies doing hand files on machine made links that’s an interesting concept there

[@wilberkeller5218]

Those look great! I'm definitely going to grab a 10mm when I can. Those tongues are concerningly small though. For a thicker bracelet I want to know I can pull on it hard and not bend the tongue. probably wouldn't happen, but just a thought. Especially with the butterfly clasps on. Which small note always stick out too much and snag things. I see one of them is mad bent on there lol. Great links over all! Cheers!

[@jorgeandujar6090]

Happy holidays raquel and Braden , to be honest that’s one of the best machine made Miami Cuban I ever seen before , the links looks so good and tight , is such a beautiful piece, I would said the only thing is the box lock, could had been a little better but still it looks super amazing, I dream one day to own one myself 7mm 🙏. Keep up the good work guys . I look forward on more videos they are soo informative. And don’t listen to those bad negative comments you guys rock be safe and happy holidays Jorge A Fall River MA

[@stephanjohnson5796]

The value is in the gold. I don’t personally find any extra value in a bracelet being handmade over machine made. Is the value there for the gram weight? Great. Does it look awesome? Great. That’s what matters. Make me shine Jacoje! I neeeeed that! Happy Holidays! 🌲 Stephan J. Waldorf, MD

[@DNW2868]

Nice chain and yeah needs a bigger slider. Really dig the Franco chains.

[@Sierra8one8]

The quality is there, and that's what I want. Beautiful miami cuban

[@drakemarquez7602]

Personally I think machine made Cubans are more consistent,they rarely have any imperfections and they shine just as bright. I like the handmade Cubans specifically because because they are made by another person and thus you are paying for their work. No handmade Cuban is the same, but with that being said, there is also more chance of imperfections. For me as long as the gold shines and is solid, I don’t care about where it’s from or where it was made, just put it on my wrist!! Also Braden I can’t even lie, with that bracelet on, you look like Tony Soprano! Thank you guys for another great opportunity to win, good luck to all! Drake M Northbrook IL

[@nickreid8410]

That bracelet is perfection! The miami cuban has always been my favourite style chain. It doesn't matter whether it's handmade or machined, if the links are tight and it has some good weight you can never go wrong! Personally I wouldn't go bigger than 7mm on wrist at 8.5". Good luck everyone 🙏🏾Happy holidays and stay shining! Nick R St Catharines,ON Canada

[@Pierre-e6f]

That bracelet looks amazing !

[@TROD170]

HAND MADE, HAND PAID! I gotta say I love the idea of someone hand making something. Not that a machine is bad, I love the idea of a near perfect chain, but I love the story behind someone physically taking the time to make the chain. But either way you can’t go wrong! But to me, hand made has a story to go along with the piece. Rodney T. Lincoln, CA

[@jmjones7742]

That bracelet is perfect! Such a substantial piece for the wrist. I care about the overall look. Machine vs handmade doesn't make a difference to me in 2024. Machines have and will continue to replace things done by hand because the quality and speed. Lately I've been back in the gym. A piece like that would go crazy on my wrist while im pushin that weight. Much love, James from West Virginia

[@DawgyPvP]

I believe it comes down to the company making the gold piece rather than hand made or machine made. The quality is in the control of the person(s) manufacturing the pieces so it wouldn’t matter the way it’s made. That bracelet is stunning and couldn’t imagine winning it, but to whoever it is your one lucky person!!! Happy Holidays to you and your family Braden. Anthony Boston MA

[@VladimirPerez-e7q]

There are no questions that 99 out of 100, a machine made is of superior quality than hand made. The consistency in quality is there, and you know your investment is safe. Now, a well crafted handmade cuban link has an added sentimental value that can be appreciated by some. The only issue with those is that you're taking a chance, and only few skilled people can get this right. Therefore, you can't go wrong with machine made for the consistency, value, and the "hang straight" factor. Much love to you guys from PA ❤ and would appreciate big time the 7mm with 8.5 length Miami Cuban from LINX Vladimir P. Freemansburg, PA.

[@johnbaumgardt9867]

Cubans are my fave. Own quite a few. I really like the one you're showing. I usually wear 12mm bracelets but that 9mm is realky slick. I might have to reevaluate my style a little. Don't worry about the small tongue. As long as it locks solid, it's fine. I kind of like minimalism. It even cuts back on weight a tiny but and saves a tiny bit of money for a part of the bracelet no one can see. It looks like it has pretty tight links and a good cut to bring out the shine. I have no issue with machine made jewelry. It usually brings down the price and the quality is very consistent. Most people wouldn't know unless you tell them. In my opinion a piece should speak for itself via its overall look and quality. No long story about its creation needed.

[@Jaydcp1018]

I prefer a handmade cuban link because it usually has a unique and artisanal touch, which makes it more special and personal. It has its own signature if that makes sense. Although machine made bracelets are more precise and affordable, they often lack the character and history that manual work can offer. The difference lies in the exclusivity and detail of the process, which for me gives it added value. I would love a 5mm bracelet in 7 inch. I personally believe that 5mm is the perfect size for daily wear. Jay Atlanta, Georgia.

[@RVBworkout]

I totally understand how handmade jewelry can be more special because the skill of the jeweler is really showcased in the piece. Additionally, handmade jewelry should come at a higher cost because of the time it takes to make a particular piece. I am not against machine made jewelry because a machine can cut more exact and also drive the time of production down and the costs to make the pieces. I, however, totally disagree with someone not disclosing a piece is machine made or, worse, selling at a handmade price when the piece was actually machine made. With all that being said, I would totally wear a machine made piece because you can even get a smaller link cut precisely and it would look super cool. Cheers to you guys on your journey with your new brand! Ranto B - Alexandria, VA

[@mike9160]

I personally prefer handmade Cuban chains for their unique charm and artistry. They have a character that machine made ones often lack but even though I appreciate the consistency. 7mm 8inch Mike.A Miami,FL

[@Clarkeisawesome]

My thoughts on Cuban Links: I think the advantage of handmade is that it feels a little bit more special because you know that a lot of work went into making it and you also most likely had to wait patiently for months to get your custom chain or bracelet made for you. Also I think the handmade box locks are better than the machine made ones because they spend a lot of time dialing it in and making sure it locks very tight. The main advantage of the machine made Miami Cuban Links is that especially for the smaller sizes (6mm and under) you will be paying a lot more money for a handmade link because the labour is starting to become a disproportionately high percentage of the price you are paying. Also Machine made links are more likely to be very consistent if it is a high quality chain like the ones that Jacoje sells. Either way both are really nice options but you are likely getting better value for your money with a machine made link. But there is somewhat of a flex factor of saying that your chain is handmade with a cuban link that doesn't exist to the same extent with other types of chains for some reason. No AI used here 🧠 I would love the 9mm bracelet in 8 inches. John A Ontario, Canada

[@dirt2595]

I just would one day like to buy a Miami Cuban from south FL.. with that said, I have bought a 2.5 from jacoje… it’s on my bucket list… my favorite size is 5mm… I just want the entry level box lock baby!!! It was the first one that I found out is box lock worthy.. David E Grandview MO

[@sundayjourneymiguelg7286]

Been watching and buying from Jaco for a while and have referred a few friends that have purchased. They have loved the quality and tbh machine made is ok I would do a hand made only if it was something custom.Cuban link is a classic and for a bday gift would be super cool to win. Keep doing your thing Jaco, happy holidays that same one would be 🔥🔥🔥

[@LeoMessi-qq9kf]

Machine made will always be as perfect as it can be, while handmade will have its own imperfections but knowing someone took their time to create something special like a Cuban brackets from scratch. My Cuban bracelet size 7 w/ 5mm. Would be a perfect Christmas gift. Carlos T Katy,tx

[@kylemccarthy02]

Handmade all the way there’s nothing like knowing that someone put hard work effort and love into crafting your piece every step of the way. Especially on a Miami Cuban. There’s nothing like it. It’s truly 1 of 1. The biggest critique part is the box lock, so I understand how the small tongue could be frustrating and potentially wear down the latch. Nonetheless, man-made all the way. For something like a rope, I don’t even know if the hand make those but machine made from Italy is the best it gets. Really depends on the history of a product that really sets it different than everything else and that is the Miami Cuban. 7 mm 7 inches is perfect for that every day. Kyle M Renton, WA

[@AnthonyJewitt]

I can’t really tell the difference between machine or man made. But to me if it’s gold I love it. If it’s gold I want it 🤷🏽‍♂️💯 because at the end of the day it’s an investment. The respect you have for others man I love it!

[@anthonylosada4896]

The thing with me and the Cuban links is the spacing between the links. I’ve been going above and beyond and searing for different companies that can make a beautiful machine made Cuban link with less spacing. Now that I saw the linx resale I am impressed and made my decision on my next purchase lol and I was going to go with Jacoje for that next purchase. Now for Miami Cuban links, it’s not a Miami Cuban links if it’s not hand made in Miami, it’s part of the culture and heritage. I would love to purchase one from the og’s in Miami once I can afford it. Hand made Cuban links are going to have tighter links since they pull the links tighter then any machine can do and they do the hand filing process as well, I know the links will not be 100 percent the same but that’s what gives it its individuality in every chain since it’s handmade and not machine made.

[@Puddin.Adams2]

I don’t own any bracelets yet, but I can say the Miami is gorgeous and if Jacoje is backing it I know it’s great quality regardless of how it was made. Some one suggested to go up 2 mm from your chain size, so a 7mm would rock well.

[@PJPMx1NxONLY]

Bought my 6mm Cuban at Linx, love it. Need a thinner one for a pendant since the box lock is too thick. Saving up hopefully will make the purchase before end of year😌 Pedro P Los Angeles,CA🤙

[@baileymaberto7544]

I appreciate a handmade cuban link bracelet because i believe that it adds to the tradition that the cuban link stands on. While machine made cuban links provide perfection, sometimes those links can be a little too tight for me. The bracelets looks awesome though and machine made will always be cheaper so its a great option and depends on the link look that you are looking for! I currently wear a 7.5 inch 6 mm bracelet but would definitely love something bigger in the 8-10mm range. Merry Christmas fam! Bailey M. El Dorado Hills, CA

[@salvadortigre3053]

I’ve had this bracelet open on a tab for months! Currently have a Jacoje 5.5mm flat Curb bracelet. Want to upgrade to this! Saving up 😤 Jacoje is my personal and only jeweler ! 🔥 9mm! 8 inches !

[@christ2419]

I like handmade jewelry because its more unique than a machine made one. You get to appreciate the jewelers craft. I would never sell a handmade piece of jewelry its worth it to pass down. Merry Christmas jacoje and Raquel 🎄🎅 David C Bear, Delaware USA

[@The_One97]

I think that hand made are better than machine made the only down side for me is that you will pay more for labor. Any size from 7-10mm is great it gives you the nice look we all want.

[@colossus8418]

The argument that some people have to choose handmade over machine made is that it was made with more care possibly but could suffer from small flaws, while machine made can be more "accurate" but does not have the "care". Both are great in their own way and you can not go wrong either way. To me, i like both and don't have a preference, i see a chain i like and machine made or handmade is not one of the questions i ask. Zachariah Melbourne, Australia.

[@GrilledReaper13]

Happy holidays Raquel and Braden! Machine-made is king. My rope chains from Jacoje are amazing. Mosinite and plated jewlery is a no go for me personally. Its not worth it and it doesnt last.

[@Hbf_Sneaks_]

In my opinion The precision of machines ensures that each link in the Cuban bracelet is uniform in shape, size, and design. This results in a consistent look and feel across all bracelets of the same model, which is often difficult to achieve with handcrafting due to human variability. 7mm Cuban is a great size and length 7.5

[@thomastommy1192]

The tongue is okay as long as it holds the bracelet on the arm. That bracelet seems nice, but the Mimi Cuban Link should have a brighter shine to it. Other than that, it looks nice, but not super nice. Cool video, thumbs up, and congratulations to the winner.

[@alfredohuidobro8936]

Cubans are an all time classic a style anyone can rock the shine on the flat surface is eye catching no matter the lighting. But between a handmade and a machine made cuban the hand made one will be superior in my opinion beacuse you know who ever crafted the cuban, you know they put the time an effort for it for someone to enjoy and love and personally me i like to appreciate the art of the crafter (plus i love the links to be tight which most kf the time can only happen with handmade) i like to think hand made jewelry is and art. Also you have to make sure you get from a reputable maker/seller like Jacoje. While a machine made is not as good because its mass made the same and who knows how the durability for it will be. It can have its inconsistency that you wont get the same craftsman ship from a hand made. At the end its all preference cause people have their likes and dislikes from both. Go with which you'll definitely love. Loving the videos keep it up❤ Alfredo H Brighton,CO

[@Alejandro-jj7yc]

I think there are definitely pros and cons of both handmade and machine made. I do really like handmade pieces because of the feeling that I’m wearing a 1 of 1. However, machine made pieces like that bracelet are awesome because of its flawlessness! At the end of the day, you can just own both! lol Praying they pick me for this one🤞🏽 Alejandro C. Charlotte, NC

[@EdsonAlexRo]

I prefer the machine made vs the hand made for 2 reasons. The person hand making the Cuban has to be super skilled, otherwise you’re stuck with a less than quality piece for a higher price. And the second reason is I like my Cubans as they come, the classic look. I don’t need a customized box lock, a special finish or any engravements. With that being said, the perfect Cuban for me would be a 6mm 7 inches🙏🏼 love all that you guys do! Edson Rojas Ridgefield, New Jersey

[@Infin80Design]

Just paid 113 a gram (big mistake) for a curb link because I was not aware of you. I appreciate this education you have I prefer the 7mm 7.5” Cuban bracelet hoping to get one 1 day for sure.

[@andrewdavid562]

Personally I think both hand made and machine made are great pieces. Yes I think machine made will be more consistent, very minimal to no imperfections, at a lower cost at times. Hand made has love and sweat put into them. I appreciate the tighter links and slightly more rounded edges. The craftsmanship is key of course, I appreciate the hard work put into handmade. I would wear both, I wear a 6mm Miami Cuban chain and love it. I would love to win and pair it with a matching bracelet from Lynx! the ultimate Christmas gift! Thank you both for all the videos and time you put in, these giveaways are very generous of you. Andrew D- Terryville, Connecticut 6mm bracelet, 14kyg, 9 inches.

[@scottkinney7315]

I just picked up a 5mm jacoje Cuban bracelet and I'm happy with it but I should have listened to you and always go bigger 😆 nobody is ever coming up to me and asking me if I went machine or handmade so I'm going either way and I'm not going to show my tongue 😆🤣😂 Thanks for your videos and the quality pieces I get from you guys! Scott k tacoma,WA

[@Sopharette]

I actually have one of your domestic-made Miami Cuban links and I wanted to give my honest opinion on the piece for others. I've never inspected a handmade Miami Cuban but I know you can typically choose a flat, curved or bubbly file. A lot of handmade Miami Cubans also have slightly tighter links because they are a craft that tries to get as tight as possible without kinks. Also I've noticed more copper alloy in handmade Miami Cubans. That being said, the Linx Miami Cuban has pretty tight links and the curved file is nice. Sophia J. Ft Lauderdale, FL

[@davidcarrillo8014]

The difference between machine made and hand made?? Price point. I do appreciate craftsmanship and attention to detail but I’m more interested in the metal within these chains. I got a machine made 22in 8mm Cuban it doesn’t hang perfectly straight but I don’t usually take it off to look how straight it hangs. It’s still well made and never have issues with it. Cubans have always been my favorite looking chains because of their slick simple look. So when I decided to purchase one I knew i wasn’t bout to get a plated one. Oh and the thing you said about the moissanite 😂😂 I have a moissanite Cuban bracelet that I got for sh**s n giggles. From the times I’ve worn it out I 100% agree that it feels off. At the end of the day if you’re buying solid gold jewelry you should try to get the best price possible. That’s why you invest in solid pieces. Thanks Jacoje, for what you do for the community. I’m yet to own one of y’all’s pieces but I know if Im selected for this one it’ll be a daily wearer that I’ll always cherish 🤙🏽

[@mikel9947]

I prefer handmade personally but I don’t see anything wrong at all with the machine made. Some companies claim their smaller Miami Cubans are handmade and are so perfect like the machine made, it makes you wonder if they are actually machine made but advertised as handmade. My first gold Miami Cuban was from Jacoje and it was perfect! For a daily size Miami Cuban chain I like the 5-7mm range and 9 or 10mm bracelet. Mike L Chandler, AZ

[@CaseyMcGowan-g2c]

Of course there is a difference. Cuban link chains that are handcrafted in Miami have an edge over the competition in terms of craftsmanship, sturdiness and beauty. The tightness and fluidity of the links along with the luxurious feel makes the links worth having if one is looking for quality and durability. Further, they also acquire more emotional and financial worth overtime which makes them perfect as heirlooms. Then again, chains produced using machines are not ‘bad’ by definition. For someone who has a tight budget or someone who is tracking down a simpler piece for occasional use, a decent fixture machine dressed chain will still be suitable and do the job well. Casey Allentown, Pa

[@Sticky93]

I remember u said “once u get that 10mm Cuban YOURE ALREADY THERE!!!!!!!!!! “💯💯💯💯💯💯💯💯💯💯💯💯 I rock my 10mm 18k all day it’s tooooo fire 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥im flexin on these hollow cats all day I love jacoje. Machine made over hand made. No imperfections. My shit looks clean thanks to you bro. 🗣️🗣️🗣️🗣️🗣️🗣️🗣️🗣️🗣️🗣️

[@alexandereast3165]

Nouveau riche

[@wsnaish]

Machine vs. handmade is all on personal preference. Like you say, if you got tight links, you got more kinks. Jacoje and Linx Cubans look to have tight Linx but without the issues of some handmade Cubans. I agree if the tongue was bigger it would be a perfect Miami Cuban. It can’t be that hard or much more cost for them. I always look forward to the giveaway videos and the content from Jacoje. 7mm is a clean size for a bracelet in my opinion. William N Trussville, AL

[@shadowvq9320]

My favorite size would have to be the 10 mm Miami Cuban is a boss chain!! Weather it is hand made or machine made as long as it’s from jacoje lynx top tier quality is all I need!!

[@kingkrow420]

I prefer hand made when it comes to Cubans, but those links look pretty solid, and I don’t get why some people would never wear a machine made, this is a beautiful piece! The main reason for my preference is the box locks. It seems like no matter who its from the casted box locks lose tension quicker. Biggest thing for aesthetics is the uniformity from the links into the lock for me, and this is where man made really stands apart. Machine made a lot of times has a larger gap right at that lock than between the rest of the links. The other nice thing about hand made is that each jeweler has their own filing profile and link shape so you can really shop for one that matches your personality. This 9mm would be a great stepping out piece for me as I have smaller wrists! Aaron G Muncie, IN

[@Dougla_D]

I’ve gotten the 5mm Cuban bracelet but it’s a bit tiny for me. I wanted the box lock option so badly because of the ‘look’ that after I put it on, I didn’t know how to remove it from my wrist - had to google it haha. My next purchase would be an 8mm or bigger with a box lock. It doesn’t matter how it’s made - as long as its made to last. The look is timeless and there’s no better feeling like looking at your gold. Peace and love. Anderson D Jamaica, NY

[@djkrazyt1333]

IMO, I don't see a difference machine made or handmade as long as it's well made and the quality is good and the seller is honest. Tim G Dundee IL

[@TayjoCA]

OHHHHH CANADAAAAAAA checking in. Thanks for another day of giveaways, you guys are awesome. I like both handmade and machine made, although handmade feels more genuine and is made with care. As long as my gold is legit and solid though, I wont complain! Taylor B. Windsor, Canada

[@freddysosa5922]

Gold is gold I take it all as long as it’s 14kt solid gold machine or handmade don’t really care as long as it looks dope Bought a 6mm rope from you guys and 2 years later I’m still in love always get compliments says a lot about the quality of gold Jacoje sells My ideal size is 7mm Cuban bracelet Freddy NYC

[@Mike-fk8xr]

I think machine made Cubans are more consistent, they seldom have any imperfections & they shine just as bright. I like the handmade Cubans specifically because because they are made by another person and you are paying for their work. No handmade Cuban is the same, but with that being said, there is also more chance of imperfections. For me as long as the gold shines and is solid, I don’t care about where it’s from or where it was made, just put it on my wrist ! Thank you guys for another great opportunity to win, good luck to everyone Mike V Moorpark CA

[@jordmane]

The Miami Cuban bracelet is one of the best pieces out there personally. When it’s handmade, the craftsmanship adds a sentimental value that feels personal and unique. On the other hand when it’s machine made, there’s a confidence in knowing that every detail has been made with precision. Both styles have their charm, but it’s undeniable that the Miami Cuban, whether machine or hand made is the best. That would be a nice starter bracelet for every day wear. Jordan E NC

[@alexb822]

I think machine made Miami Cubans are better than handmade for one reason. CONSISTENCY! Having each link identical to the next makes the chain appear makes uniform and classic. I have nothing against handmade chains as I respect the hard work and craftsmanship put into them but I do prefer machine made. For me if I’m spending hard earned money on a chain I want it to be top quality and have that perfect shine which is why I feel machine made is the way to go. A 7mm Miami Cuban in 7.5inches would be awesome!! Hopefully Christmas comes early🙏🎄. Thank you all for these giveaways I look forward to them every year! Alex B, Indiana Ps. It’s corny to wear a fake Rolex😂

[@bryceestep]

Bryce E. Fountain Valley, CA 🕎✡️ You guys are amazing for doing the 12 days that you’ve got going on. It really shows what giving hearts you both have to bless so many people, especially at this time of year. Truly generous!! To be 💯I have to say that the hand made takes the win on this for me because it shows man’s raw and talented craftsmanship. As an artist myself(making music), I love supporting the work that other artists can create. Handmade Miami Cuban pieces show the true artistry in the artist and what they are capable of doing. That alone makes the sale so much more appealing versus getting a machine made piece. On the down side though, humans can sometimes mistakes when creating something that a machine wouldn’t make. I have had the personal experience of having 2 handmade Miami Cuban pieces ship out to me with forgotten diamonds and sizing issues. Since then, the artist was able to fix these mistakes first hand, but I do wonder if the same mistakes would have been made in the first place if my pieces were machine made. All in all, I think I would still prefer handmade because of the artistry behind it. 🕎

[@amberh5892]

I’ve always preferred handmade. Just because I like the idea that someone personally made it with their own hands, but machines produce consistent pieces, the pieces that people make with have inconsistency between pieces. My favorite size is 6mm 8in for a bracelet. Amber H CA

[@Stuckinthepast_]

My dad has a Cuban link bracelet would love one for myself to match him and keep his legacy my favorite Cuban chain link with is 12mm 22” for chain and a 9mm 8in for bracelet :)

[@colecooper3575]

Hand made for the larger sizes🔥very nice and clean! But i would not have any issues purchasing a smaller machine made Cuban! Both ways work just honestly depends on the size of the Cuban. Both come out looking beautiful and I know yall put time and effort into finding the best so I would trust any machine made from yall 🙏❤️🔥 A 7 mm 8 inch would honestly be a great piece for any occasion 🎉 Cole C. Odessa Tx

[@robertdeleon486]

Waited 5 years to save up for my solid gold chain it’s feels good knowing it’s real and that it’s worth every day i worked for it.. and that bracelet would be awesome on my wrist.. lol thanks for the giveaway even if I don’t win..there ain’t anyone else doing this..big props!

[@571gomez]

This is beautiful brother , mechanically or handmade they both look great 👍

[@571gomez]

Honestly I have to say thank you for having such great jewelry at unbeatable prices . I have yet to see any other website come close to your quality and price and variety! I’m hoping to one day buy one if god permits it .Domestic is just as good as imported in my honest opinion especially .

[@571gomez]

5mm Cuban 10k ❤️