Jacuzzi JVS165S, JVS185S & JVS270S Variable Speed Pump Control Panel Set Up and Programming Video

Ease of programming is the key to a successful Variable Speed pump experience. If you can’t easily program and set up your VS pump it kind of defeats the purpose of having such a cutting-edge piece of technology. Fortunately, the new line-up of Jacuzzi VS pumps is super easy to set up and program. If you watch the video I walk you through all the key points.
The control panel is set up with four easy-to-program speed buttons and unlike it’s predecessor this pump features a programmable “Time Out” or “Quick Clean Mode.” A super important feature for the pool pro and homeowner alike. It also features a built-in Freeze Protect Mode so in low temperatures the pump will turn on and run to prevent damage from freezing.
Here is more on the JVS Line-up of pumps:
Jacuzzi has a new line-up of Variable speed pumps and they are now available at your local Leslie’s Pool Supply. These VS pumps have been designed with the new Department of Energy (DOE) regulations in mind and all of them meet the new standards. They also feature a lot of other upgrades and there are currently 3 models to choose from. There are the new Jacuzzi JVS Series pumps:
JVS270 is a 2.7 THP VS pump with a DOE rating of 12.9 WEF
JVS185 is a 1.85 THP VS pump with a DOE rating of 10.1 WEF
JVS165 is a 1.65 THP VS pump with a DOE rating of 10.7 WEF
All of these pumps are dual voltage which means they will work with either 115 volts or 230 volts. So if you have an older pool that is wired on a 110 v breaker, you can use any of these three pumps as the voltage is automatically modulated. I would suggest the JVS165 or the JVS185 to utilize the total hp rating of these pumps. The JVS270 will be throttled down to about 1.5 hp when connected at a 110 v breaker.
All three pumps are also automated ready so all you need to do is connect the Comm wires to your particular automated system. They come factory set to connect directly with Hayward Automation. For the others, you may need an adapter sold separately. But the simple fact that you can connect these pumps to your existing automation is a real game-changer.
They are also backed by a 3-year warranty and a 4-year warranty for the JVS270 so rest assured you are getting a quality product.
The pool pump can be the highest energy hog in your house, passing your Air Conditioner and Refrigerator just by the sheer amount of hours it runs each day. If you have a 1 ½ or 2 HP pump installed and you run it 8 hours per day, not to get into complicated conversions of kWh (Kilowatt Hours) and how you are charged each month by your Electric Company, just imagine it as having on Twenty 100 watt light bulbs every hour it is running. That is a lot of electricity each day and if your bill is tiered by usage, meaning the more you use the more you are charged, your bill can get very high very quickly. On average a pool pump will be about 40% of your total electricity bill each month.
So the best way to save money is to cut into your monthly electricity bill and that is exactly what a VS pump does. Simply put, your standard pump runs at 3450 RPM (Rotations Per Minute) which is about 1800-2000 watts. A VS Pump can be set to different RPM and at every lower RPM the total wattage used is lowered. So just lowering the VS Pump down to 2100 RPM, cuts the watts down to 685 watts. At 2100 RPM the water will appear to flow just as strong as a standard pump running at 3450 RPM. Cut it down even lower to 1200 RPM and you are down to 165 watts. So instead of having twenty 100 watt light bulbs running you only have a little over one light bulb running each hour. This is the reason your electric bill can be cut almost in half by simply installing a VS Pump.
So if you are thinking of switching to a VS pump to save on your energy cost the Jacuzzi line-up would be a great choice.
Learn more or order:
lesliespool.co...
Visit my Website: www.swimmingpoo...
eBook: www.swimmingpo...
KZbin Video Index: poolmandave.blo... - A list of all of my videos.
Blogger: poolmandave.blo...
Facebook: / swimmingpoollearning
Twitter: / mrdgvb1
Join me on Patreon: / poolguycoaching
Podcast: www.buzzsprout....
Podcast Website: www.thepoolguy...
Coaching Site: poolguycoachin...
Shop at Leslie's: Leslie’s Pool Supplies has been do-it-yourselfers and pool trade professionals trusted partner since 1963, providing quality products and services to make pool care easy and solutions and expertise to do it right. lesliespool.com...
Epic Trailer by Rafael Krux
Link: filmmusic.io/s...
License: filmmusic.io/s...

[@machine2747]

Great video. Much better than the owner's manual. Thank you!

[@robertfugate5827]

After purchasing/installing this pump, I've spent several days watching this video, reading the manual. After programming it, could not stop it from running! I'd powdered it down and it kept going into prime mode then back to running. The only FIX was (to reset to factory settings) this cleared up all the issues I was having!

[@tinahillger7755]

Same here...

[@dlcook87]

Great information thank you!

[@1coolafmom]

I have a question. Why is my filter gauge on zero but my jacuzzi is working and all baskets have been cleaned out?

[@MsNina1955]

Hello where I can buy the cntrol panel for JVS270S 2.7 THP

[@christianp9128]

Hello, I pressed the left arrow and stop/resume buttons simultaneously for a few seconds. Pump entered into "test mode". Any idea how to get it out of that mode? I tried many configuration and nothing. Resetting the breaker at distribution panel didn't do the trick either. Any help is appreciated

[@halfcentchet2135]

I just want to run my pump manually. The installer programmed in my run time and I don't have a manual. How can I cancel the program and run it manually? Specifically, I need to run my filter for around 48-72 hours straight to get rid of the algae. Anybody? Thanks!

[@yoryinapeguero3050]

We just installed our JVS270Sz. Plumbing and Electrical done. When turned on says “check wiring between display and drive” . We did all wired are well placed but pump still doesnt work. Any advise? Please

[@SPL]

Maybe the wire from the screen to the drive has some damage. It should be covered under warranty.

[@azsunbum1]

My pump is programmed thank you. Problem is the clock is correct and it says it will shut off at 5am??? It’s 230p now, and it’s not programmed to run until 10p. I’m so confused 😢

[@MichaelRasner-r5m]

i just bought and installed my JVS270S, Timer 1 is set to start at 8 am and turn off at 4. It ran all night long. Today is second day and did the same thing. Does this pump stay on the whole time?

[@SPL]

Could be another program in there. Check that. But negative. Should turn off

[@GreenTurtle720]

How can I set multiple days instead of one day?

[@SPL]

The schedule can be set easily for 7 days a week. Worst case look in the manual for detailed instructions

[@snake_eyes_garage]

Thanks for the walk through. I'm assuming that the max rpm limits the prime...

[@SPL]

not 100% sure but it probably will limit the priming speed to the max you set.

[@lexmar227]

When I press stop how can I get it to the menu bar again ??

[@SPL]

Should be able to access the menu even when stopped. Refer to the PDF manual in case there is an issue of some kind

[@katiefarris575]

How do I over ride to turn on spa

[@joeykid2001]

I just purchased the JVS 165 for my built in pool.... I noticed that the Suction , as well as force of water out of my wall jets arent as strong as my previous hayward 1.5hp motor- even when on high speed.. is this common- there are times the suction is better but not always.. any ideas ? ALso is the water resevoir in the pump isnt filled to the top of the glass/ window cover- is that normal ?

[@SPL]

I suspect it is the lid o-ring. Try removing the lid and lubing up the oring. Also, carefully wrap the unions with a rag and take a pair of large channel locks and give it a slight turn to tighen those up. Not to much as you could brake the unions.

[@joeykid2001]

@@SPL thank you I will give that a try.. ok heres another question. The new jacuzzi pump was hooked up 2 days ago.. first day i was able to get into the options screen by holding down the 2 buttons as insteucted… today it will no longer go into that mode.. i even unplugged the pump to try and reset it… ever hear of this problem before? Im thinking theres an issue with the pump…

[@tkonzl6059]

joeykid2001 - I just replaced a very old single-speed pump rated at 1.5 HP and 3450 RPMs with this same Jacuzzi 1.65 HP VS motor and when I push the Clean button on the console, I get the pressure at which I'm accustomed to running - about 9-11psi with clean DE filters because the Clean feature runs at 3450 RPM. As I lower the speed the pressure drops dramatically. Check your RPMs and check your pressure using the Clean button.

[@eddier9784]

Hey I'm having the same issue with low pressure. Did you ever figure out what the issue was?

[@joeykid2001]

@@eddier9784 ..it seemed to have worked itself out after a few days.. I put some gasket grease around the gasket on the pump lid.. since then no issues

[@SmedleyButler1]

Your the best, but I can never remember you channel name and I have a great memory. You might consider a diff name....also, how long do these variable speed pumps last vs static speed? 90% electricity savings, 8f true, is nullified.if you have to replace every 6 years, $2k for these before install

[@SPL]

Me neither. 😆

[@qwksti]

great vid, ?, if i run a pool cleaner ( hayward etc ) what rpm should i have the speed at?

[@SPL]

2600 RPM should do it.

[@sandrawiley2339]

I Need to Backwash. I moved the handles (that are attached to pipes and filter) they way I always have in the past with my old Hayward Pump. Now with Jakuzzi, I then turned on Quick Clean. NOTHING Happens Cant find a video that explains what to do HELP

[@SPL]

Hit quick clean and then the right arrow

[@derekjp6043]

I'm probably just a rookie, but I cannot find the max GPM for the JVS270s anywhere online.

[@SPL]

With 1.5" plumbing 45 gpm with 2" plumbing 80 gpm

[@Josh-qo7yd]

How do I hook up a freeze protector

[@SPL]

It will automatically go into freeze protect mode.

[@franciscoagredano5607]

How disable password jvs jacuzzi

[@billyfriedman4638]

Is there a way to control this pump with Wi-Fi?

[@SPL]

Negative on this.

[@sandramartinez4119]

I have no power to pump I checked braker and it is on.what can I do next

[@SPL]

Check the wires to the pump.

[@JoseHernandez-dh8rr]

How does the freeze protection work?

[@SPL]

It turns the pump on if the air temp gets below 38 degrees to prevent freezing

[@JoseHernandez-dh8rr]

@@SPL thanks for the reply… installing one for my customer and was just concerned about the freeze protection. Didn’t know if it had a freeze protection integrated with the pump.

[@tooredaz]

I want to turn off Time 3 (which I set previously). How do I do that?

[@SPL]

I believe if I remember you hit the stop/resume button Then Speed 3 and you can navigate in there to delete the schedule.

[@kirkrengland]

Had the same question and issue. Only way to remove timers 2-X is to factory reset. It's not that difficult to reset everything but what a major miss from Jaccuzi.

[@anthonyzanni5000]

How do I get to the screen to set daily schedule

[@SPL]

Should be able to access it if you follow this video tutoria

[@anthonyzanni5000]

I’ve watched the video a bunch. The last screen I see on my pump says to access the timer schedule use the > when I press it I’m then out of the program all together.

[@anthonyzanni5000]

It’s says timer menu but nothing happens

[@anthonyzanni5000]

The section I can not get to is labeled 6.7. Timer Menu in manual

[@dwaincarlrobertson]

How do you erase the timers I want to start over and reprogram it

[@ei3554]

Nobody can answer this it’s so irritating

[@sweetdew7933]

@@ei3554 I understood is Stop Resume.

[@kirkrengland]

Had the same question and issue. Only way to remove timers 2-X is to factory reset. It's not that difficult to reset everything but what a major miss from Jaccuzi.

[@robertshafer1593]

I need to add chemicals and the pump must be running at least 48 consecutive hours. How do I do that? The pump is programmed to stop everyday at 5pm. How can I just turn it on and let it run as long as I need?

[@SPL]

You can program it to turn on at 7:00 am and then turn off at 6:59 am. That will give you 23:59 minutes.

[@robertshafer1593]

@@SPL Thank you. I set up a new program to run 12AM to 11:45PM. It would not get out of 15 minute increments. Is there a way to do that?

[@tinahillger7755]

How do I reset back to factory settings?

[@raymosnik9499]

I have the JVS185S Jaccuzi pump. How do I turn off the timer for T1? I have the pump in remote mode connected to a Pentair SL4 controller.

[@SPL]

It should be connected via the Comm wire and then in the pump there is a setting for automated control.

[@SmedleyButler1]

In other videos you said how the major pool motor/pump brands were all pretty comparable in reliablitiy/ longevity. Are you saying the ease of programming puts a little prefrrnce on Jacuzzi here? Not that you are, It's fine if you're getting paid to promotoe stuff, but being upfront about it makes me come back to channels and hiding it or lieing about products quality to promote (like techlore) makes me unsub ...again, not that you doing that, i just knew a master pool guy in AZ had HUGE preferences in pumps but i just can't remember which.... Pretty sure he hated Hayward motors/pumps but liked their vacuums and other things

[@SPL]

Century makes the motor for Jacuzzi ( which is a Hayward pump) Pentair and Jandy. The best pump in my opinion right now is the new Jandy Speedset