Thanks. I had replaced the other lines and gaskets but didn't know about the rear line. I have to go back and change it, as I now have a new leak.
@hanitwfik8 ай бұрын
yeah its better for you to do all one time
@prayforakey6212 жыл бұрын
what tools did you use to take out the coolant pipe? '0:49"
@haroldmorris59018 ай бұрын
Great Video!
@hanitwfik8 ай бұрын
thanks you 🙏
@kenc4104 Жыл бұрын
Replacing that plastic pipe between the firewall and the engine was the single worst job I've ever had to do on a car.
@hanitwfik Жыл бұрын
True, there is no room to lose or tight the bolt, but the easiest way to replace it is to use the very small 1/4 swivel magnet 10mm socket
@kenc4104 Жыл бұрын
@@hanitwfik I ended up buying three different 1/4" ratchets! One long, one short, and one swivel head. LOL.
@robertcarlos789 ай бұрын
@@hanitwfikI got 3 loose but the one on the passenger is pain I been on 2 days trying to get it off
@robertcarlos789 ай бұрын
How you get the bolt from that leaking coolant pipe man the passenger side bolt is hard to get too
@hanitwfik9 ай бұрын
I use 1/4 long and short flex ratchet also 1/4 snap on long dr ratchet cordless with 10mm swivel socket 1/4
@jsarmotta7 ай бұрын
The heater manifold the one that's at the back of the engine, did you have to add gaskets or does the new part come with them already installed?
@hanitwfik7 ай бұрын
Any part comes with its seal or gasket
@fearlessreview3 жыл бұрын
Dealing with the same issue, mechanic recommended replacing all the lines and coolant pump -.-
@hanitwfik3 жыл бұрын
Yup its better to replace them all than you do the bad one now and pay labor one time Instead of keeps coming back and back more labor more money
@eostrow19632 жыл бұрын
How much it cost you?
@robertcarlos789 ай бұрын
@watched4748where you from
@robertcarlos788 ай бұрын
@watched4748where you from
@stlbtrthnu5514 Жыл бұрын
I have a huge leak below the firewall/between the trans and engine. Am i looking at the same crossover pipe for the 2009? Doesn't show on any manuals online. Any help appreciated. Thanks in advance
@hanitwfik Жыл бұрын
what is your car model engine size ?
@JetFire9 Жыл бұрын
Most definitely, yes. But just change all the plastic. Every last piece. It's all end of life on a 14 year old Jag. Replacing one part at a time would be silly.
@missippid47802 жыл бұрын
Did you have coolant in your oil pan
@hanitwfik2 жыл бұрын
Nope
@g3shumaker5503 жыл бұрын
So you decided to tackles it yourself? Brave
@hanitwfik3 жыл бұрын
Yeah thank you
@smx3798 Жыл бұрын
Nice work man. The repairs are not to hard. Just need parts, tools and patience.😊
@thehammermanduke2 жыл бұрын
Good Stuff!!!
@missippid47802 жыл бұрын
Did any coolant leak in you oil pan
@hanitwfik2 жыл бұрын
No
@usmansheikh16532 жыл бұрын
I do ! Did you ever figure out your problem??
@g3shumaker5503 жыл бұрын
I could not clearly see the part numbers for the pipe between the cylinders and back by the tranny, long box, and is it possible to change without removing the Intakes
@hanitwfik3 жыл бұрын
Hello that part between the cylinders is the only one has about 6 or 7 different part numbers so you either took the part out and get the number or call the dealer and give them the vin number and they look it up for you
@JetFire9 Жыл бұрын
On many cars today, you just have to suck it up to remove the intake to do a lot of projects. It's just not that hard. Do it.
@atxjax15 ай бұрын
Do you have to remove the oil cooler to do any of this work?
@hanitwfik5 ай бұрын
No you don't
@jscott92552 жыл бұрын
Great 👍 work I’m having the same problem how much did you charge for everything to be fix? I have a 2009 maybe 🤔 a little different engine I need help?
@hanitwfik2 жыл бұрын
Email me hanitwfk@yahoo.com
@adrianjimenez36142 жыл бұрын
I changed that crossover pipe 3 times on my Rover Sport
@hanitwfik2 жыл бұрын
Did you get the upgraded one
@adrianjimenez36142 жыл бұрын
@@hanitwfik ,did they make one? I got mine from the dealer, when it went bad Landrover replaced it under parts warranty, the third time i replaced it I took it to landrover to check it, they told me I had a bad radiator
@JetFire9 Жыл бұрын
If you had switched to waterless coolant, you wouldn't have had to do that. The issue is the pressure in the cooling system can get up to an incredible 30psi. That's about the same as a car tire, yet these are plastic pieces. Waterless coolant doesn't have water to expand, so there is close to 0psi at all times.
@adrianjimenez3614 Жыл бұрын
I tried waterless coolant 10 years ago when I had my l322, i would do it again but the price has gone up so much
@JetFire9 Жыл бұрын
@@adrianjimenez3614 How much does a new water pump job cost? Less than waterless coolant. And how much does a warped head cost or dropped valve seats. And since its lifetime, it doesn’t really cost much more than regular coolant.
@knife54082 жыл бұрын
I have a 2012 Jaguar XF Base 5.0. I'm having the same issue. I replaced the water pump, and Engine Outlet Tube, but I still have a leak. Based on my model and year what do you believe what hoses may be cracked, with part number? Thank You
@hanitwfik2 жыл бұрын
To be honest I told the customer if you want me replace the bad parts only I'm ok if I recommend to replace all of them because with the new parts the pressure blow the older ones so I prefer to replace all the coolant pipe hoses while everything is a parts already you don't wanna pay extra labor again
@knife54082 жыл бұрын
@@hanitwfik Thank you much for your time and your response. Keep up the good work.
@hanitwfik2 жыл бұрын
@@knife5408 my pleasure 🙏
@knife54082 жыл бұрын
@@hanitwfik I just had a few more questions was it hard to remove the manifold intake, and how long approximately did the repair take?
@hanitwfik2 жыл бұрын
@@knife5408 it's so easy for manifold only it took me like 15 to 20 minutes to remove. Hoses pipes if you planing replaced them all it will just take approx 2 hours max
@23BERTRRAND2 жыл бұрын
I also have the same problems and my engine is overheating! It can have a link
@hanitwfik2 жыл бұрын
Yeah those pipes always go bad in jaguar and land rover cars
@royster33452 жыл бұрын
This came up in my feed, maybe because I was watching WatchJRgo replace his F-Type engine. But he replaced those plastic pipes with alloy ones for this reason before they failed.
@hanitwfik2 жыл бұрын
yeah you can replaced them with alloy if available
@qj52992 жыл бұрын
I just saw this thread? Where are you located?
@hanitwfik2 жыл бұрын
Snellville ga on 78 with scenic hwy
@qj52992 жыл бұрын
I was hoping you were closer. Lol. I'm in NC
@hanitwfik2 жыл бұрын
@@qj5299 what's up with your car
@qj52992 жыл бұрын
@@hanitwfik I had a low coolant light come on.. took it to the dealership and they topped it off. Then drove it rhe next morning and performace restricted popped up on the dash. Getting a few PO 300 codes.
@ThomasJohnson-rq1oe Жыл бұрын
What was the price
@hanitwfik Жыл бұрын
Of what ?
@ronniesaulsberry98613 жыл бұрын
The dealer want to charge me $3200 to do the same exact thing to my 2010 jaguar xf. is this a reasonable price?
@hanitwfik3 жыл бұрын
Omg that's way so so high
@TheJaguarTech2 жыл бұрын
Between parts and labor that's not bad. It's a Jaguar not a chevy cavalier
@ThomasJohnson-rq1oe Жыл бұрын
Send
@robertcarlos789 ай бұрын
@@TheJaguarTech I think it’s high
@autotrimmers63532 жыл бұрын
Is this car expensive to maintain?
@hanitwfik2 жыл бұрын
Of course
@autotrimmers63532 жыл бұрын
@@hanitwfik what’s expensive cause I have a bmw already
@hanitwfik2 жыл бұрын
@@autotrimmers6353 they have a common problem with the heater line hoses you have to replace them all dealer costs over 3k but if you have mechanic friend he can do it for you cheaper
@robertriley53522 жыл бұрын
I love my Jaguar, but seriously this stupid cooling lines in the materials they make them out of fail so easy it is an embarrassment
@supersidecar8901 Жыл бұрын
Very disappointed in Jag for using garbage plastic. But ive realized even high end GM and Ford do the same thing. Engineered to fail after a number of hot and cold cycles. Mfgr gets to sell parts and labor. Im in the proces of replacing the same crap parts. Fortunatly my son does cnc work. Were working on prototype replacements in aluminum.
@JetFire9 Жыл бұрын
It's basically a Ford engine, so there you go.
@smx3798 Жыл бұрын
All manufacturers use useless plastic pipes. Smh. The plastic is not cheaper than metal pipes. They justify the use.
@inmyopinion_talk3 ай бұрын
Fun car to own ,but I will never recommend a Jaguar to anyone. These cars are money pits. Had a Jaguar XF 2010. When the pipes started going. Bad , the car became useless.
@inmyopinion_talk3 ай бұрын
I will never recommend a Jaguar to anyone. These cars are useless.