2011 2014 Ford F150 OEM Remote Start Starter Install With Module And Key Program

[@ihavealsbutitdoesnthaveme9939]

I’ve watched so many of these videos, but yours, for some unexplained reason, was so much easier to follow. I think it has to do with your voice which sounds very calm and “matter of fact.” And, you don’t do a lot of unnecessary talking or over explain a simple “Click the button”

[@LUCAMTire]

Thanks It definitely is a lengthy process and i tried to cut the video down as short as possible. Get straight to the point. Happy to help. Make sure to give the video a like and to subscribe to the channel to help me out. Thanks for watching and enjoy your remote start.

[@bennionbyu]

Thanks! Worked perfectly. To get the extended Forscan program, I paid $10 for a 1 year license. Even with the software cost, it saved a ton vs the dealership.

[@LUCAMTire]

Happy to hear things turned out good. Ya the dealer here in Canada wanted way way to much money. Make sure to like the video and subscribe to the channel to help me out. Thanks for watching.

[@ihavealsbutitdoesnthaveme9939]

I paid the $10 because I didn’t want to wait for the FORScan forum admin to approve my request. I have more money than patience. 😎

[@Kirkmorris13]

I used your video to do the remote start install on my 2014 F150 XLT and it worked beautifully. I did buy a different OBDII cable. I bought the one from the Forscan site but other than that I did the same exact procedure as you did and it worked awesome. Thank you for making this video! Now if I only i could find a way to set my traction control & Advance traction control default to off when I start the truck and have the option to turn it on on the fly.

[@LUCAMTire]

You get better take off with the advance track and features turn on. Just a fyi. Only thing it will eliminate wheel spin for the most part.

[@anarchyrun8253]

Thanks for putting this together! The step by step setting up Forscan was very helpful. Some stuff has changed (didnt need to have a forum account) but it got the job done. I was able to get the new keys cut at the hardware store for $ bucks and program them myself. I was also able to connect with a bluetooth OBDII BAFX dongle I already had.

[@LUCAMTire]

Right on happy it helped

[@donc9751]

Great video! Just got forscan and waiting for new keys and obdII connector to arrive as I only have 1 key fob and now I want the remote start for my 2014 f150! I might be able to handle that with the help of your video! I'm no mechanic but am tech/PC savvy so you got yourself a new subscriber and fan! Hopefully I can find the spreadsheet that shows what numbers do what functions and dont end up with 1 original key and 2 new ones that wont start my truck since it sounds like I need to delete the working key for the process but I'll back everything up 1st. Hopefully it's not hard to upload the saved profile. Thank you!

[@LUCAMTire]

I did not have to delete keys which was nice for me so I didn't need to dabble into that scenario of things. Keep in mind if you are using the trial version of forscan it is for a 30 day trail. Then payment is needed I believe. Been awhile sense I used it. If you are looking to install a OEM remote start turn on your remote start module now before trial version times out. You can program the keys later with the door-door lock function with rotating keys in the ignition.

[@donc9751]

@@LUCAMTire thanks for your reply and great tip! I went ahead and paid the $10 for the 1 year license as I figured I'm going to save hundreds on buying 2 keys and programming by dealer. After watching your video I thought I want to do the auto start too! But I already ordered 2 keys, had I not done that I could of saved money by ordering the remote start as yours came with 2 keys! Slaps forehead lol. I googled some prices for the remote oem start and found them anywhere from $75 (I thought that was suspect a bit even tho it said new oem) to over $200. Thanks for the tips and advice! I subbed your channel my 1st visit!

[@donc9751]

@@LUCAMTire Alright ! Everything went great with programming my keys! Then I saw a post on the Forscan forums by someone who said he ordered the OEM remote start antenna Ford Part DA8Z-15603-A on amazon so i ordered it for under $29 and it arrived today, in a small box like yours and in that is a genuine ford parts white box with just the antenna and everything you got but without the keys. On forscan the guy that posted said he was able to start his using his od regular 3 button key that came stock with our trucks (2014 xlt here) so, I'm hoping I will be able to use my regular keys to start it remotely. I did not have to delete any keys on my trucks system to get my keys working either. If my 3 button key does work like his to start my truck remotely, I will come back and share that info as well. Your video is a huge help! I will install my antenna soon and go from there.

[@LUCAMTire]

@@donc9751 there is ways of programming the 3 button key with different sequences. I don't know the programming of the 3 button key but know it is possible

[@Mar093]

@@donc9751 Hello, im in the same situation as you were 2 years ago lol. Do you recall how you were able to program your new key with only one original key? It would help me alot!

[@jerrydolan6924]

fantastic video and walk thru, successfully turned the remote start on and programmed the keys thanks so much

[@LUCAMTire]

Hey not a problem. Happy I could help. If you haven't already and would like to; Like this video to help me out and subscribe to the channel if you would like to see future content. Thanks for watching

[@Superduty_59]

I just programmed 2 additional keys today for my 2015 F550. I pretty much used the same procedures as you but I only had 1 key and I used Forscan in the pats key function to program 2 addition keys without erasing the original keys. Then I used the turning the key on and off 8x to program the fob portion of the key. Now I will order my remote start antenna and the turn on the remote start function using Forscan.

[@LUCAMTire]

If your using he trial version of forscan I would turn the module on now before your trial version expires.

[@Superduty_59]

@@LUCAMTire Thanks. Good call on that.

[@LUCAMTire]

@@Superduty_59 no problem

[@wyattburp2099]

I am kind of lost on your reply. I have a 2011, just order the remote kit but only have one original key. Are you saying you can program the new keys with forscan when you only have one original?

[@Superduty_59]

@@wyattburp2099 I did. When you say remote kit do you mean long range antenna? All this will work even without the antenna. the antenna just gives you more range. All parts could be found on ebay for under $60 at least when I did mine last year.

[@raulwolff7438]

THANKS FOR THIS VIDEO, I WAS LOOKING FOR HOW TO DO THIS, THANKS TO YOU AND FOLLOWING YOUR STEPS I WAS MAKING IT WORK, I am very happy

[@LUCAMTire]

happy I could help

[@LUCAMTire]

feel free to subscribe and see some of my other videos. I will have a new exhaust video coming out pretty soon

[@brianzug933]

Worked like a charm. Thanks for the for scan walk-thru.

[@LUCAMTire]

Hey no problem. Happy it helped. Took me a while on how to figure things out myself. Figured this would sum things up for a good majority of people.

[@nathanbrown3390]

@@LUCAMTire Extremely helpful video. Also worth mentioning you can enable the settings menu for it by changing the IPC settings through forscan. forscan.org/forum/viewtopic.php?t=5458 . For 720-01-02 -- " 5521 4C0A A096" change the '4C0A' to '4F0A'.

[@LUCAMTire]

@@nathanbrown3390 thanks good to know.

[@elalacran24]

Excelente, realice el procedimiento en mi Ford f150 y funciono correctamente, Muchas gracias

[@LUCAMTire]

Your welcome. Thanks for watching. Like this video and subscribe to the channel to help us out. Enjoy your remote start

[@bigcountry15151]

I assume you get the kit and have someone cut the keys for you and then use your original keys to program the new keys for the first time and then the remote start button works from there? (of course that is after turning on the SJB with Forscan.

[@LUCAMTire]

yes

[@jasonsierra6809]

Thanks for the video! Worked perfectly!

[@LUCAMTire]

Glad it helped!

[@nolanmcmichael7334]

Can’t find anything on the forum about whether or not this will work for an XL trim on a 2014 F150. Is the only requirement the hood sensor, not necessarily the trim package?

[@LUCAMTire]

@nolanmcmichael7334 in behind the glove box check to see if you have the hook up for the remote start antenna and I believe you need a hoot switch. Check to see if there is a plug in the wiring harness to hook it into. If these two plugs are there I am thinking it should work.. Now is the codes to turn on the modules the same I do not know. Assuming it should be the same coding but not 100% sure.

[@nolanmcmichael7334]

@ thanks. Trucks getting transmission replaced so of course I find out about all this while my trucks in the shop for 2 weeks. Tempted to drop by the shop and tell them I need to look at a couple things haha. Guessing if the TPMS port is there and I don’t have a hood switch, I could probably get one installed. Thanks!

[@zito1360]

Just added a third key for the r/s activation. First key on 3 seconds, second key 3 seconds then new key 3 seconds. Door locks then cycle. No longer then 10 seconds between each. It also activates other buttons on key.

[@nfk7225]

Thanks for the video. Do the original keys still function as normal once the new keys are programmed?

[@LUCAMTire]

Mine do.

[@mikebarr3876]

Thank you so much for your help!!! It works like a charm.

[@rogerbakke7535]

Hey man great vid, we did it yesterday and it’s great. You said you want to get in a “nice warm truck”. To do that you also have to enable climate control. Did you do that? Cuz ours just turns on the fan, it does not engage the heat/AC, which is partly a key feature of remote start. Where in forscan do we enable and what are the codes? Thanks for your help and have a good one!

[@LUCAMTire]

Mine is a manual dial for for fan and temp. Mine is not digital. I preset my vents and put the heat and fan speed to wear i would like it for when i start the vehicle and once the truck starts it automatically turns on

[@johnwartjr]

I have the same problem. How did you fix it?

[@jengafet5893]

If I’m programming 2 new keys can I do the second one right after the first or do I need to start over with the original keys? Hopefully this makes sense

[@LUCAMTire]

I did the second by starting over going through the sequence as shown in the video. You can try it other ways if you want to try multiple ways and let us know. I did it the way the instructions told me to. You do need both primary keys to begin

[@jengafet5893]

@@LUCAMTire ok thanks I’ll start over for the second one not like it’s that hard haha. Have a good one

[@braydenbledsoe3252]

Any idea what the run time is or if there is a way to change it? I have a 2011 as well with the same boring gauge cluster and no LCD.

[@LUCAMTire]

The run time was 10 minutes. I believe you can change it either threw the instrument cluster or by forscan. You can also start the truck then half way between the remote start cycle you can remote start it a second time while its running and it will run for 20mins

[@LUCAMTire]

My truck had a recall for the transmission and when I received the truck back the remote start was not set to 10 minutes. It is now set to 20 or longer.

[@brandonl1579]

super helpful video man. thank you

[@LUCAMTire]

no problem happy it helped thanks for watching

[@wyattburp2099]

I have been having issues getting mine programmed. Pats kicks me out with a error and wont program new keys. Question, do you have to program the key and the fob separately if i don't use PATS and do the key on off pregramming?

[@gene2200]

Just added a motion detector module from fairway ford to my 2014 perimeter alarm with no problem. Said I need 2 antennas then have ford program it. Since my laptop was recently hacked with ransomware I'd have to have them do it. Still waiting to hear back from them. Module on right side was never mentioned?

[@LUCAMTire]

The little module antenna I installed is for remote start. I am not sure what you are referring to about the module on the right side?

[@chrisgould7177]

Can you recommend an ELM unit? A lot of the ones I've looked at on Amazon seem to have A lot of issues.

[@LUCAMTire]

not sure of brand elm327 from what i remeber, get one that is a cable not blue tooth

[@ironauto1]

Many thanks for the video

[@LUCAMTire]

You are welcome!

[@gdamire3]

can you post where your hood switch is wired for those with base model vehicles?

[@LUCAMTire]

I'll check into it and get back to you.

[@gdamire3]

Thanks

[@LUCAMTire]

@@gdamire3 is there a exsisting wire under the hood you can plug the anti theft hood switch into? if so it should be around the drivers side. the anti theft hood switch taps into the body control module passenger kick pannel. from looking at the wiring diagram. never had a chance on opening the hood on the truck yet. ill see if i can trace the wire before long

[@gdamire3]

Jason506 copy thanks my vehicle has no wires present I wanted to install them but had no idea where they connect to

[@LUCAMTire]

see if there is a 2 wire connector that is plugged into the coolant jug bracket? on mine there is a 2 wire connector that plugs into the bracket of the coolant jug. it is just there. you pull it out of the connector holder that does nothing besides hold it and plug in the hood switch. if it is not there you will need to run a wire into your kick pannel passenger side. a fuse may need to be put into place if your wire is there

[@makkialrubeh866]

great job ,does this procedure work with ford explorer 2015 XLT ??

[@LUCAMTire]

I am not 100% sure. The key programming will probably be similar, but for the numbers you need to change in forscan that would be something you need to look up. You can go on the forscan forums and or find a forscan module data sheet and look up what you need to change, always best to save your settings before you change the settings in case you need to change things back.

[@makkialrubeh866]

Thank you

[@LUCAMTire]

@@makkialrubeh866 no problem

[@justingolden]

Did you have to install a hood pin to ground out or anything?

[@LUCAMTire]

No I already had a hood pin in place as a sensor for door open or hood open warning light. If your vehicle is not equipped with one you will need to put a hood switch in or bypass. Not sure how bypass works. Prolly just run a wire to ground from hood sensor wire. Best to put in hood switch though for safety scenarios incase working on engine and engine starts by pressing button by mistake.

[@jeffflowers729]

I was able to get remote start up and running. Mine was 0047 and I changed it to 0147. While it works to start the truck, pressing the button again does not stop it. Before I try it, do you think changing it to 0148 would fix that?

[@LUCAMTire]

I don't know Try pressing and holding the two times remote start button once. Once press hold. Truck should shut off but you will not be able to start again by remote start untill you start it by the key then can start it by remote after that.

[@evanmelton3315]

Do I have to program the new keys after using forscan to unlock remote start or can I do it before? Or does it matter?

[@LUCAMTire]

I programed my keys before activating the remote start module using forscan so the truck could start and stop by the key then I programed

[@LUCAMTire]

Im thinking you can do it either way as you are just turning on the module with forscan and then programing the keys to the truck.

[@evanmelton3315]

Jason506 last night I programmed my keys first and it worked great! I also used forscan to turn on the remote start menu in the instrument cluster.

[@LUCAMTire]

@@evanmelton3315 cool What year is your truck? You say a remote start menu in the instrument cluster? Is this another setting besides turning on the remote start module? I never checked to see if my menu is turned on or not. Just turned on the module and away I went. Lol

[@evanmelton3315]

Jason506 it’s a 2012 XLT 5.0 I went into IPC (as built) and went to 720-01-02 and changed 4COA to 4FOA and my menu shows up in the cluster now!

[@ryncurry100]

Do you know if all of your steps (and kit) would work for a 2010 F-150 XLT?

[@LUCAMTire]

I am not sure. You would need to see which kit needs to go for your truck. It could be but I am not sure. Different models and packages may take different kits. Search your year make model size engine and see what comes back for options for your vehicle and take it from there.

[@LUCAMTire]

Also 2010 has a 5.4 so different computers in the vehicle so might be different for number coding. You can search on the forscan website for module code changes through there forums.

[@SEsGarage]

Great video 🤘🏼

[@jchowe2001]

The scan tool i got has a switch on it, MS---HS? Do you know which one it has to be on? Any help is appreciated

[@LUCAMTire]

I am not to sure. sorry i am not of help for this

[@tomschafferschannel]

@Jonathan Howe Did you figure this out? Seems like all the adapters I find so have this switch? Which mode did you use?

[@LUCAMTire]

@@tomschafferschannel when I did mine and it asked if I had the switch I just put in I don't know. There was yes, no, and I don't know. Hoping this helps

[@ihavealsbutitdoesnthaveme9939]

If your OBDII has a MS/HS switch, when the pop up asked if you have the switch, click yes. Then it will prompt you to make sure it is in the MS position. If your OBDII is mislabeled like mine is, then you won’t see the additional modules come up in the configuration until you move the switch to the other position.

[@ihavealsbutitdoesnthaveme9939]

Don’t worry, you’re not going to mess anything up. Just move the switch if all the modules under the MS section of the screen didn’t populate

[@michaellawrence1531]

Just bought a 2014 Expedition, Can I have the Ford Part nmbr? I would like to see if its also compatable. thanks a million

[@LUCAMTire]

Here is a eBay listing. If you look down through the listing you can see a manufacturer part number. This is for a single key kit. I purchased a duel key kit. Same kit just different quantities of keys. Hope this helps www.ebay.com/itm/161501215986

[@ironauto1]

I would like to know how to activate the trailer brake control switch on my truck using for scan.

[@LUCAMTire]

Not sure to be honest. It is by turning on a module In the system. You will need to go on forscan and search your year make and model and the numbers needing to be changed. I had a guy at the dealer change it one day and didn't charge anything as it only took a minute 🙃

[@braydenbledsoe3252]

I lost my 3rd key and so I'm trying to get a 4th to work. I still have my 2 master keys but I cannot get the fourth one to work. I've spent like an hour trying many variations and don't know what gives.

[@LUCAMTire]

not sure. You might have to many keys programmed. Might have to delete a key from the factory setting. I have 4 keys programmed to my truck. Programmed the third. Put that one a side then programmed the 4th.

[@braydenbledsoe3252]

@@LUCAMTire Well my f150 has that basic analog dashboard screen so I dont think I can wipe keys off all that easily.

[@braydenbledsoe3252]

@@LUCAMTire Update: I found this on the ford forums and it worked. You don't have to enter the first two master keys for the button programming. You have to enter the partially programmed key (It will start the truck but won't remotely (lock/unlock/start) and turn it forwards and backwards 8x times but with it ending on the on position (not started) and you have to press a button on that remote to fully program it.

[@LUCAMTire]

@@braydenbledsoe3252cool. Thanks for the update and for letting us know.

[@bigwalk2840]

Do you have to get the keys cut before programming

[@LUCAMTire]

The key will not work in the ignition if it is not cut for the lock cylinder. So yes you would need your keys cut before to program using this method in the video

[@georgeballesteros7091]

Hi i got a question. Is the key new become a admin key too?

[@LUCAMTire]

I do not believe so. You have the first admin key and a secondary admin keys and then program an additional 1 or 2 keys after that. There is only one admin key as far as I know

[@LUCAMTire]

You would need to erase the programed keys in the computer and program the admin key your looking to have

[@BigDaddysPlati]

I wonder if some trucks come with the remote start but not the keys?

[@LUCAMTire]

possible but don't think

[@85thunderstruck]

Got the part number for the kit you ordered?

[@LUCAMTire]

No I do not. Purchased the kit off of ebay 3-4 years go. Ebay seller was Fairway Ford from what i remember.

[@braydenbledsoe3252]

It worked very well.

[@renovillarreal6006]

Thank you for explaining it in such detail your video was awesome ☺️. Saved me hundreds$

[@alexcaballero5846]

Do you have a part number for the kit?

[@6981bpd]

Good vid. Thanks

[@LUCAMTire]

welcome

[@kcled01]

How far away have you tried starting it?

[@LUCAMTire]

100-200ft For the most part I am not overly far when trying to start it. Works alright. I dont need to carry a extra key fob with me is what I like. May have some issues through brick walls or high signal areas. For the most part if there is a straight line of sight it works. No complaints from my side of things. Others may differ.

[@kcled01]

@@LUCAMTire, thank you for the quick reply. I will be ordering and installing very soon

[@Sam-rv4ro]

Using the remote won't shut my remote start off. I have to physically get in and turn ignition on and off. Any ideas?

[@LUCAMTire]

When truck is turned on by remote start. If you hit lock and start 2 times it will run an additional 10minutes. If you just hit the 2x remote start button once and hold the truck will shut off but you will not be able to start the vehicle again with remote start untill the key is in the ignition

[@Sam-rv4ro]

@@LUCAMTire I'm guessing mine is messed up then. I don't have to hit lock and x2 twice to start. X2 once, it locks the doors and starts, but still can't shut it off if I bump it on accident. I have to physically turn the ignition on and off. Brake pedal won't even shut it down. Thanks for getting back so fast though!

[@LUCAMTire]

@@Sam-rv4ro you can get in the vehicle. Hit the brake and hit the gas and nothing will happen. Vehicle will continue to run. I guess I never really tried it just 2 time start to start. But when I go to shut off I either push and hold the 2x start untill it shuts off or I hit lock and then press and hold the 2x start button

[@LUCAMTire]

@@Sam-rv4ro what year is your truck?

[@Sam-rv4ro]

@@LUCAMTire 2011. No manner of key presses will shut her down. 🤣

[@TheOGNuke1]

Where did you get yours cut ?

[@LUCAMTire]

Got it cut at a lock smith. Place that cuts keys. Was a store that specialises in keys and locks

[@LUCAMTire]

Dealer wanted like 80$ to cut them and I got them cut around 8$ a key lol

[@spawn100011]

Did the cut also include the new programming?

[@jc-xo8yd]

so forscan is free for a bit?

[@LUCAMTire]

Ya normally 30 day trial

[@LUCAMTire]

30 day trial then it will end or you can pay

[@jc-xo8yd]

cool thanks

[@LUCAMTire]

@@jc-xo8yd no problem. Make sure to like this video if it helped you out and if you'd like to subscribe to the channel for future content don't forget to subscribe

[@Saltysteele]

"Abraham Lincoln Installs Remote Start"

[@cwnews8785]

Who cut your keys and how much would it cost at dealer to have remote enabled and keys cut already have antenna and keys

[@LUCAMTire]

Call your dealer for pricing. They can better answer your question as they make their own price. Depends on your dealer and their rate. Are you in canada or USA? I Was quoted around 100$ to cut the 2 keys at the dealer. Was quoted around 300 to install and turn on modules in truck for labor at the dealer. Quoted Remote start at dealer was around $600 CAD. My quote was around $1000 around 5 years ago. To much so Bought on ebay and programed myself using forscan. Had a local lock Smith cut the keys for $15 Remote start installed keys cut doing it myself was around 350

[@brentonb6429]

Mines saying the adapter is not fully capable

[@LUCAMTire]

possible you might not have the correct ob2 adapter

[@hardnoisy2835]

Can u just take it to ford?

[@LUCAMTire]

You sure can take it to ford and I am sure they will happily assist you. But if you are looking to save some money and believe you can achieve the out come on your own here is a video to help you understand the scenario. I achieved obtaining the remote start kit and installing everything with programing with a few hours of my time. In end result I was able to save 600$CAD Ford was going to charge me $1000 plus tax. I obtained and installed for $400 x years ago. Pay extra and have some one else install a remote start for you or do it yourself. The decision is yours to make.

[@TactiCali27]

Anyone try this in 2020? Does Forscan still allow you to download the extended license?

[@bennionbyu]

I am not sure if the free option in the video works but you can pay $10 for a 1 year license which was worth it for me.

[@TactiCali27]

@@bennionbyu thanks

[@JMHVAC502]

Hmmmm... Didn't work. The new keys start the truck however the buttons do not work on the 4 button keys

[@LUCAMTire]

Do you have the keys programed to the truck with the different procedures I showed In the video? Also your antenna is plugged in? Turned on the module with forscan?

[@JMHVAC502]

@@LUCAMTire I will try again. The antenna is hooked up and turned on by forscan.

[@LUCAMTire]

@@JMHVAC502 you need your master key and believe a secondary programed key to program additional keys but it starts the truck so it just has to do with activating the key to operate with doors now.

[@JMHVAC502]

@@LUCAMTire I got it. Had to program the key to start the truck. After the new key started the truck then I would put it in the ignition, turn it off and on 8 times and leave the new key in the run position after the 8 cycles, push any button on the new key that is in the run position, the horn sounds 1 time, then push any button on the original key and the horn sounds again then your done. That's how I had to program the actual 4 buttons on the key

[@LUCAMTire]

@@JMHVAC502 good you got it.

[@shafkathilias5658]

Where to cut these key?

[@LUCAMTire]

go to a key company, their should be a key cutting company around your area google it

[@thomaswagner3041]

Confirmation code does not work

[@LUCAMTire]

You need to set up your own account in forscan. I believe the confirmation code your referring to is for the program? If so it is to your user name?