Recently switched over from Premiere After Effects and Audition. Love your content. It's looking like you're the audio guy here on KZbin for Davinci. No ones putting better Davinci audio info out there. I'm learning lots from your videos. Thank you!
@JasonYadlovski2 жыл бұрын
Awesome, thanks so much for your kind words! I love me some good audio, it’s a lot of fun and I saw there was not a lot of good content out there about Resolve audio. Glad you’re finding it all helpful, thanks for being part of the community! 😁👍
@KShahzad15 күн бұрын
Loved this video, helped a lot. I was always doing manual voice editing using the key frames. That was tedious. Previously after searching, watched few of your videos. Now watched this, paused at the end, applied and played with all i learned, it turned out so well. Also saved it as preset. Thanks, keep making such content.
@JasonYadlovski14 күн бұрын
Great to hear!
@DomsMediaZone3 жыл бұрын
Dude, I've been using these setting because of some one else's youtube video without realising what they actuality do. Man, I'm lucky my channel is fairly new so I can apply what I learned from you going forward. Realy appreciate it, great video.
@JasonYadlovski3 жыл бұрын
Awesome man, it’s great to know what everything does and why. I try to keep it simple, no reason to get more complicated than necessary right? 😜 thanks for checking out the video and best of luck on your channel! 😁👍
@DomsMediaZone3 жыл бұрын
@@JasonYadlovski So glad I found your channel, thank you!
@JasonYadlovski3 жыл бұрын
You got it! Happy to help. If you ever have any questions feel free to drop a comment somewhere. 👍😁
@therealeffect2 жыл бұрын
I've watched a bunch of videos on compression and never really understood it... until I watched this video. This was so simple and brilliant. Thank you!
@JasonYadlovski2 жыл бұрын
Awesome, glad I could get the concept across and help you understand it. 😁👍
@thomasrork40432 жыл бұрын
bro it's just 8:50 but I finally got wtf is limiter and compressor. thanks god. god bless you
@JasonYadlovski2 жыл бұрын
Nice, glad you found what you were looking for! Thanks for watching! 😁👍
@kozmosi Жыл бұрын
Agree with the other posters great content when trying to learn Davinci Audio.
@JasonYadlovski Жыл бұрын
Thank you!
@JeffLosaria2 жыл бұрын
Ohh man, I was manually editing all the peaks in my audio before I saw this video. I didn't know about the limiter! Thank you for this!
@JasonYadlovski2 жыл бұрын
You’re welcome!
@mariokotlar3032 ай бұрын
That was a great explanation, thank you!
@JasonYadlovski2 ай бұрын
Thank you so much for your support!
@JacoblBroughton Жыл бұрын
Super helpful, thank you. Turns out the compressor was what i needed, i'm still trying to dial in the gain on my microphone so my audio was peaky as hell lol.
@JasonYadlovski Жыл бұрын
Glad it helped!
@chrisfmjesusmountsteven61462 жыл бұрын
You just saved a 5 hour audio for me mate. As soon as I get money from next pay check I'll send it your way. Like, subbing and will promote you on the social's. Cheers mate.
@JasonYadlovski2 жыл бұрын
Thanks so much! Glad I could help you out, thanks for the like and sub! I appreciate it! 😁👍
@AryMir3 жыл бұрын
Now it all makes sense. Thank you, Jason.
@JasonYadlovski3 жыл бұрын
You're welcome!
@theskinnyfromphatty58112 жыл бұрын
Thank you thank you thank you! Your last point about setting the range saved me gazillions of $$$ on my documentary!
@JasonYadlovski2 жыл бұрын
Awesome, glad the video helped! 😁👍best of luck with the doc!
@peacedozer8 ай бұрын
You have the highest-quality tutorials. Thank you so much!
@JasonYadlovski8 ай бұрын
Thanks for your kind words! I do my best to bring you all the best!
@schnellkannjeder3 жыл бұрын
finally someone who shows other things from Davinci Resolve 17 .... thanks for that. Audio is simply not shown enough.
@JasonYadlovski3 жыл бұрын
Agreed! I’m currently working through an audio series now and I have a playlist with tons of audio videos for DaVinci Resolve. Check out my channel if you’re interested, thanks for watching!
@schnellkannjeder3 жыл бұрын
@@JasonYadlovski That is mega. I have problems removing the hall that would interest me very much. We are a small 4 man company, not the best equipment and in our shop it is very echoing. We did an interview there, now the hall has to go.
@enriquemiranda66343 жыл бұрын
Impressive tutorial Jason, clear explanation to the point ... how many times have I looked at this option and never used it ... thanks sp much to clear that to me...from now on I will pay more attention to the audio in my editing session, in the past I only touch the audio to lower or raise the audio levels , I also consider that I work in news and the time of my editing is 30 to 45 minutes, but I promise to use your class of today... LOL
@JasonYadlovski3 жыл бұрын
Thanks for watching! Glad you found the video useful! I’ve got lots of other audio tutorials if you were interested. 👍😁 kzbin.info/aero/PLsOqsM0-aW4FqsOPNk6z6TOn3BeRHpLe_
@torrvic11568 ай бұрын
Thank you so much! I struggled a lot with this audio settings and I’ve managed to achieve good results in OBS Studio but in DaVinci Resolve it is very different.
@JasonYadlovski8 ай бұрын
You're welcome! Resolve has an awesome set of tools, just takes a little time to get used to it.
@Blackkatt3 жыл бұрын
Damn, I really like you! you have an excellent persona, easy to understand and straight forward. You don't get lost in yourself when you talk like MANY of us others 😂😎
@JasonYadlovski3 жыл бұрын
Haha, thanks! I try to keep it simple and to the point. Maybe throw a little personality in there, haha.😜 I think I do get lost in myself sometimes, but I just edit that part out. 😆 Thanks for watching!
@mo.dia97 Жыл бұрын
Thank you so much sir! You are the best!
@JasonYadlovski Жыл бұрын
You’re welcome!
@GalaxyArtMedia2 жыл бұрын
Good tutorial. Thank you!
@JasonYadlovski2 жыл бұрын
You’re welcome! Thanks for watching!
@6ocram Жыл бұрын
Amazing tuts. Thank you!
@JasonYadlovski Жыл бұрын
You’re welcome! Thanks for watching!
@FortHipHop3 жыл бұрын
DYNAMICS Explanation!! Thank You man.
@JasonYadlovski3 жыл бұрын
You got it! Love some dynamics! 😁👍💯
@OnTheSamePageTogether2 жыл бұрын
I wish I could like this again every time I pull it up to reference what I need to do with my audio! THANK YOU
@JasonYadlovski2 жыл бұрын
You’re welcome! 😁👍
@mandsheemar32252 жыл бұрын
I like the thumnail jason 😂 you should make video about it 😂. Keep doing the great work 👍👍👍
@JasonYadlovski2 жыл бұрын
Thanks! 😁👍
@user-yf6wz1ih8m Жыл бұрын
Thanks a lot, Man! You are great
@JasonYadlovski Жыл бұрын
You're welcome!
@kapfe1029 ай бұрын
Another great video - this should save me lots of time! Do you also use Dynamics to make breaths, lip-smacking et cetera less audible?
@JasonYadlovski9 ай бұрын
You can, dynamics could help a little bit. For example, an expander or gate can help with breaths, but lipsmacking that won’t help so much.
@EmilioExploring2 жыл бұрын
Thanks Jason!
@JasonYadlovski2 жыл бұрын
You’re welcome!
@FFVison3 жыл бұрын
I love the irony of watching a video about dynamics and immediately being blasted by the loud intro music. :-P
@JasonYadlovski3 жыл бұрын
Yeah man. 👍😁 thanks for watching!
@FFVison3 жыл бұрын
@@JasonYadlovski Heh, just finished watching actually. I'm watching while working from home and have to stop videos to take calls at times for work. Great video. Liked.
@JasonYadlovski3 жыл бұрын
Thanks man, I appreciate it. 😁👍
@JonBear3 жыл бұрын
Such a good video. Got my audio sounding great!
@JasonYadlovski3 жыл бұрын
Awesome, that’s great to hear! I love me some good Audio! 😁👍💯
@software21712 жыл бұрын
really very helpful .. tnQ !!
@JasonYadlovski2 жыл бұрын
You’re welcome!
@sgmusic20863 жыл бұрын
THANKS FOR THIS VIDEO BECAUSE IT'LL HELP IN MY NEW VIDEO😀
@JasonYadlovski3 жыл бұрын
You got it! 👍
@MADB0X Жыл бұрын
Love this tuto! Great work!
@JasonYadlovski Жыл бұрын
Thanks!
@ThePerfectG2 жыл бұрын
great video beast! thanks for the info
@JasonYadlovski2 жыл бұрын
You’re welcome! Thanks so much for watching!
@dannoringer3 жыл бұрын
Great tutorial. Thanks. I just used it on a clip with rooster crows, and it was perfect using the limiter.
@JasonYadlovski3 жыл бұрын
Nice that’s awesome! You’re welcome! 😁👍
@dannoringer3 жыл бұрын
@@JasonYadlovski Jason: I just tried to use the dynamics (limiter) on more than one clip, and was confused on how to select which clip that I wanted to "operate" the dynamics on. On the first clip, it seemed very straight forward, but on the 2nd or 3rd clip it seemed less straight forward. It's probably something really simple, but on DV17, sometimes the control design assumes facts not in evidence, and one ends up guessing how to proceed. This is no doubt only a problem for software as capable and powerful as Blackmagic DV17. Anyway thanks for your videos. You take really complex controls and make getting results crystal clear. Your videos are always my "go to" when I want to learn something about DV17 !!!!!!!!!!!!!!!! regards, Dan
@JasonYadlovski3 жыл бұрын
Hey Dan - so when you’re using the dynamics, they apply to the entire track, not a single clip. So you only have to do it once and it applies to every clip within that track. We don’t have the option to use dynamics only on a single clip unless you put that clip in a track by itself. Does that make sense?
@dannoringer3 жыл бұрын
@@JasonYadlovski Jason: OK, got it. Crystal clear as usual. DV17 dynamics apply to the entire track, not just one selected(highlighted) clip. Yes, it makes sense, and thank you for your lighting fast reply. Of course the ultimate flexibility would be if the dynamics could be set for each individual clip, but really, it's not much of an issue for me to have the Track level dynamics control. I guess if a person really needed to have a different dynamics setting for two different clips, there's nothing saying that you couldn't just open up another track, and put your "other" clip over on that track. Don't know how many audio tracks DV17 supports, but I know I personally have had 5 tracks operating on a single video before, and it showed no sign of that being the upper limit. Again, thanks Jason !! You are really THE best at DV17 tutorial videos !!!
@thilinaalagiyawanna36803 жыл бұрын
Thank you very much
@JasonYadlovski3 жыл бұрын
😁👍
@YaoHAlex2 жыл бұрын
nice video! exactly what i was looking for
@JasonYadlovski2 жыл бұрын
Glad I could help!
@yamesotericist41883 жыл бұрын
Thanks!!!
@JasonYadlovski3 жыл бұрын
You're welcome! Thanks for watching!
@YTantirungrotechai3 жыл бұрын
Thank you for your VDO. It's very informative. I'm subscribing for more!
@JasonYadlovski3 жыл бұрын
Thanks so much for the sub, I appreciate it! I hope you find a lot of good info to help you out. 😁👍
@apeel20083 жыл бұрын
Thanks again. Looking forward to giving this a try.
@JasonYadlovski3 жыл бұрын
You’re welcome!
@Brandicmooo2 жыл бұрын
This was such a well made video, thank you!
@JasonYadlovski2 жыл бұрын
You’re welcome and thank you for watching! 😁👍
@grainstore-deangibson53082 жыл бұрын
Thanks.
@JasonYadlovski2 жыл бұрын
You’re welcome!
@marcingosiewski17793 жыл бұрын
There is definitely a need for a video on bus assign, sending/outing to sidebus etc. What is missing in this video is explaination how to make dynamics panel to listen to specific track or bus.
@JasonYadlovski3 жыл бұрын
Hi! Thanks for checking out the video! I’ll add that idea to my list of videos to make. Here’s a video on audio ducking - I show how to use the send/listen buttons in the dynamics to have one channel to listen to another channel. I think it might help you out. kzbin.info/www/bejne/mqibaYB9gp6qZtE
@roehaus13 жыл бұрын
Outstanding video... just wondering what the sidechain is and what the listen button does. Great job!
@JasonYadlovski3 жыл бұрын
Thanks! The sidechain is a way of having an effect be activated by another track. The most common way I use it is for audio ducking. Here's a video on how to do it: kzbin.info/www/bejne/mqibaYB9gp6qZtE Thanks for watching!
@SantiX08 Жыл бұрын
super helpful 👍 is there a way to apply the gate on a clip level instead of the track level ?
@JasonYadlovski Жыл бұрын
No, you can only apply a gate on a track level. Just drop your clip in it's own track and you'll be good to go.
@Anti_Woke3 жыл бұрын
I couldn't help myself - I've ordered one of those sweet Speed Editors.
@JasonYadlovski3 жыл бұрын
Awesome man, let us know how it is. 👍😁💯
@kogamavfx Жыл бұрын
Hey great video, definitely the best for dynamics in Davinci. But I don't really get the difference between compression and normalization.. Thanks.
@JasonYadlovski Жыл бұрын
Thanks! So normalization will essential adjust the entire clip in one shot so that the clip meets the normalization level you set. For example, if you normalize Peak volume to -9db, then the clip would auto adjust the volume so that the max/peak levels are -9db and everything else will move accordingly. Compression is a bit more dynamic on how it works. You set a threshold or level where you want it to start. For example -20db. Then you compress or reduce any signal over -20db by the ratio you select - for dialogue typically 2:1 or 2.5:1. This means for every 2.5 db of volume over the -20db threshold, the volume will only increased by 1db. So it's compression the audio above a certain level you set. Compression also allows you to make quite parts louder and louder parts a little quieter, where as normalization only sets on level and everything moves accordingly. So quite parts wills till be quiet. Hope this help a bit!
@kogamavfx Жыл бұрын
@@JasonYadlovski Yes now it's clear, thank you really much! But what if I adjust the volume of the clip in the mixer until I reach the point I want my peaks to be, instead of the normalization?
@JasonYadlovski Жыл бұрын
If you adjust the peaks to where you want, your doing the same thing as peak normalization. Compression allows for more consistent audio by allowing you to boost the quite parts while limiting (compressing) the loud parts.
@defender77092 жыл бұрын
COOL!
@JasonYadlovski2 жыл бұрын
😁👍
3 жыл бұрын
Thank you :-) Always good to get back to basics ;-) Ciaooo JF
@JasonYadlovski3 жыл бұрын
You’re welcome! Thanks for watching! 👍😁
@adee7546 Жыл бұрын
Your videos are awesome. One question: when I apply some of your (awesome) suggestions, my computer slows down to the point that I have to wait several seconds before I can actually hear a sound after I play. It's incredibly slow. Any suggestions?
@JasonYadlovski Жыл бұрын
Thanks! I'd try some of the things I mention here: kzbin.info/www/bejne/jn-WZJ2YasSkjaM to see if it helps playback.
@PuranaMaalika3 жыл бұрын
3:18 "it's not the kind that you put on your face" 😂😂😂
@JasonYadlovski3 жыл бұрын
🤪💯🤣
@PuranaMaalika3 жыл бұрын
@@JasonYadlovski Dear bro, Does it support gif files in Davinci resolve 17.2
@lilyounggamer3 жыл бұрын
do you plan on doing a vid about fusion in davinci 17 they have some new features as well like the shape nodes
@JasonYadlovski3 жыл бұрын
I may do one about fusion but I’m not sure. Fusion really bogs down my computer, time for computer upgrade. 😁
@JudgeDreadz Жыл бұрын
Could you say more about the difference between noise reduction and the expander / gate? Am I missing something or do they give equivalent effects?
@JasonYadlovski Жыл бұрын
The expander and Gate are going to reduce the level (volume) of audio below a certain DB level (threshold) that you set. It can either completely cut off the audio using the Gate, or just reduce the levels (based on your settings) using the expander. For example, the Gate and Exapander will help reduce the noise between words when speaking or if there is some sort of background noise below a certain DB level. The Noise Reduction included in Resolve works a little different and in my opinion it really isn't that good. I really don't use it because I'm not usually satisfied w/ the results, but it try to isolate dialogue/vocals and eliminate other background noise. In reality, instead of the noise reduction effect, I'd use Voice Isolation if you have the studio version or I'd use something like Waves Clarity VX. I hope this helps a bit, let m know if you have more questions!
@JudgeDreadz Жыл бұрын
@@JasonYadlovski Thanks Jason, I have been using the noise reduction but maybe I should try the gate / expander
@JasonYadlovski Жыл бұрын
It’s worth a try, depending on the noise you want to remove. 👍
@glen-draketoolworks71862 жыл бұрын
At 13:30 your said "A gate allows you to set a point, and then below that point you can lower the volume as much as you want." Isn't that what an expander does?
@JasonYadlovski2 жыл бұрын
Yes the expander does the same but with less adjustment options. I’d use the expander to lower the volume, I’d use a gate to cut the sound out (like background noise).
@chanakyanani2 жыл бұрын
Great video and channel. Thanks for the content. I recently switched from PP to Resolve and i'm loving it. Your content helped me a lot to understand the differences and all, especially in the audio department. I have one question, a little off topic, how are you zooming in on a part of the screen and highlighting, greying out other part of the screen while explaining?
@JasonYadlovski2 жыл бұрын
Thanks! Glad my vids are able to help you out! To zoom in on the screen, I do that in my screen recording software - Screenflow for Mac. I've got a preset in there I can just hit and it creates that zoom in effect. Great software if you are on Mac, but its not available for PC I don't think. Thank you for watching!
@chanakyanani2 жыл бұрын
@@JasonYadlovski thanks for the reply. OH sucks, i use PC. I'll try something in OBS
@pumkin542 жыл бұрын
What is the opposite of an expander? I tend to talk really quiet and then get really loud. So I turn on the compressor to control the loud parts, but then I have to manually increase the volume of all the parts that are too quiet. Is there something that will automatically increase the volume of anything that's below a certain dB?
@JasonYadlovski2 жыл бұрын
Hi! Probably the best, but must time consuming thing to do is use keyframes to keyframe the quiet parts louder. Or make cuts around the quiet parts, move them to a new track and work with them there. If you don't want to do that, I'd boost the makeup, enough so that the low parts come across well, then apply the compressor and lower the threshold to compensate. Not sure it it would work, but that's where I'd start.
@fdhtheory7506 Жыл бұрын
Does DaVinci Resolve not have a dynamic processing option? This video’s great, but I’m just looking to “process” the audio like in Adobe Audition. Raise the valleys, lower the peaks, create a more unified sound. Sort an auditory version of ‘best fit line’. That way, if I raise the volume, it doesn’t overmodulate or even worse cut off peaks.
@JasonYadlovski Жыл бұрын
I’ve never used adobe audition before, but if you’re talking about something like dynamic EQ, it doesn’t have that built-in. But if you had a plug-in, you can run any audio plug-ins that you have right inside of fairlight. I’ve been using the F6 waves plug-in lately, are you talking about something similar to that?
@victorvdr92 жыл бұрын
Hello Jason. I'm really new into Davinci and your videos are helping a lot! Thank you! I'm trying to find some option or workflow to animate the adio effects. For example, I'm trying to remap the speed of the audio with keyframes to simulate how the sound gets slower as it goes away from the viewer. Another example is to keyframe the reverb to make the transition from one kind of environment to another. Is this possible? Thank you again for your great videos!
@JasonYadlovski2 жыл бұрын
Hi! Thanks so much for checking on videos, I’m glad to hear that they’re helpful! Resolve is awesome but there’s so much to learn. So in order to have the effects change over time, I think you have to work with the automation tools. I don’t have a video on it yet but I will be working on one in the near future.
@victorvdr92 жыл бұрын
@@JasonYadlovski Thanks for the response Jason! I'll take a look on the Automation tools. Looking forward for your video on that field!
@writeforanimation Жыл бұрын
How do you RAISE the level of low-volume voices? I'm working on a panel in which some speakers are super loud and I can fix that with a compressor, but how do I raise the voices of the panelists whose microphones are very low?
@JasonYadlovski Жыл бұрын
You can try the new dialogue leveler if you have Studio. If the voices are all in the same track, use the makeup slider in the dynamics panel to make the quite voices louder while using the compressor to make the loud voices quieter. If the quite voices are in their own track, use the volume slider in the inspector or the compressor/makeup in dynamics. I’f you use any effects that have gain, you can also boost the levels there.
@Ryzza53 жыл бұрын
A long Hold on a Limiter seems redundant to me.... if the threshold is no longer being exceeded then there is nothing to limit so why hold the limiter?
@JasonYadlovski3 жыл бұрын
Hi! The hold is important when for example if you have a little bit of space two points that need to be limited. I think it just helps the effect be smoother instead of turning off right away. But you may not always need the hold too. Depends on your audio. Thanks for watching!
@freakinoutanames61053 жыл бұрын
In what circumstance would you use hold?
@JasonYadlovski3 жыл бұрын
Hi! Hold is used when applying dynamics. It tells Resolve how long to keep the compressor/gate/limiter active after it is no longer needed. For example if you are speaking and take a breath, with zero hold, the effect will turn off and then turn back on when you are speaking. If you had the hold set for 1/2 a second for example, the effect would stay on while you take a breath because it's holding it for a length of time you specify. Does that make sense? Hope this helps!
@miguelplasencia_2 жыл бұрын
Hey Jason! Hope you are doing great! I'm just wondering if I can modify single audio clips in the tab fairlight. Thanks for everything you share!
@miguelplasencia_2 жыл бұрын
forgot to mention, without adding any other track
@JasonYadlovski2 жыл бұрын
Hi Miguel! Doing great here, hope you are well too! Yes you can modify individual clips in the Fairlight tab, just select the clip and use the inspector to make adjustments. You can also add effects to individual clips by opening the effects library and dragging/dropping an effect onto a clip. Unfortunately you can't use the dynamics on a single clip, that has to be on a track level. Hope this helps!
@tubeman19832 жыл бұрын
Is there a way to apply a sidechain to a third-party plugin, like the Fabfilter Pro Q3 in DaVinci Resolve? Cheers :)
@JasonYadlovski2 жыл бұрын
Sure, you can do it. You can also just send channels to a bus, then apply the plugin to the bus.
@tubeman19832 жыл бұрын
@@JasonYadlovski It would be great if you made a video about sidechaining and showed us how to do it! :)))
@bmcgoo60273 жыл бұрын
Hi Jason. Do you ever get crackling problems with your Blue Yeti microphone?
@JasonYadlovski3 жыл бұрын
Funny you mention that, I don't get cracking in my yeti, but yesterday I was trying to record directly into resolve and I was getting some cracking. It was because Resolve was set to 48,000 rate and the mic was at 96,000. Once I matched them up, it was good to go. Maybe look into that...🤔
@bmcgoo60272 жыл бұрын
@@JasonYadlovski Thanks a bunch for the tip Jason, I will definitely make sure that my settings match. Keep up the good work with your to-the-point videos!
@JasonYadlovski2 жыл бұрын
Will do!
@OrlanDave3 жыл бұрын
Thanks. I'm trying to move from Premiere Pro to Resolve. I use the dynamics effect in PP, but I can apply it to the clip instead of the track. I generally edit using as few layers as I can. Is it possible to apply such adjustments to the clip, or am I just doing it wrong? I also ordered studio with the speed editor, and someday it may even ship. I use the Contour Shuttle Pro 2 currently.
@JasonYadlovski3 жыл бұрын
You’re welcome! Yes, you can apply to a specific clip if you’d like. Just open your FX library, go to the audio FX, click on the one you want and drag it and drop it on top of the clip you wanna apply it to. Then you should have the effect on just that clip. That’s awesome that you got the speed editor, it looks pretty cool. The studio version is awesome since it uses a lot of GPU power versus the free version uses only CPU power. Plus you get some extra features and effects and what not. Best of luck making the transition, I’ve talked with a lot of people who have done it and it seems to work out well. Thanks for watching!
@wahabdilawar3 жыл бұрын
Please teach us how to create a text flowchart diagram in Davinci Resolve. I want to record a lecture with flowcharts description.
@JasonYadlovski3 жыл бұрын
Animated or static that just reveals? You can make it in fusion with background nodes, text and rectangles.
@wahabdilawar3 жыл бұрын
@@JasonYadlovski I would like the text to reveal row by row as I speak about it in a voiceover.
@JasonYadlovski3 жыл бұрын
Got ya. The easiest way is to build a static chart however you want, then bring it into Resolve and just use a mask with keyframes in the color tab to reveal it as you speak.
@carlosandreviana94483 жыл бұрын
Great tutorial. thanks! One aside question. What transition did you use for the fliping clip in the back of the current one at the end of the video?
@JasonYadlovski3 жыл бұрын
Thanks! I think it was just a 'slide left' transition that comes in DaVinci Resolve. Thanks for watching!
@eduardogonzalez42433 жыл бұрын
Since Resolve 14 I've noticed that whenever in Fairlight I apply the equalizer settings you recommend in your previous video, it doesn't save it, (in multicam I click on the audio I want fixed, but I click away and come back and it's as if I never EQd, what am I doing wrong?
@JasonYadlovski3 жыл бұрын
Hi! that's strange, I haven't seen that before. Maybe try a new project? It should hold the changes for you. 🤔
@eduardogonzalez42433 жыл бұрын
@@JasonYadlovski on multicam edits this happens. The question is am I supposed to do EQ etc on the track selected on the timeline (which could be multiple selections throughout a multicam - Or - should EQ be done after you “open in timeline” the multicam individual clips then edit those individually? If it’s the individual clips I will tell you that it never remembers the EQ I do, when I come Back to the edit it doesn’t show up. Also it’s confusing that when you click Equalization in Fairlight, It seems to be a separate thing then clicking on the one in inspector. If I was to use just my intuition I would want to turn on the equalization in inspector if I’m doing any equalization in fairlight. I’ll try to send a short video here so you can see what I’m talking about
@JasonYadlovski3 жыл бұрын
I understand it can be confusing. Just to clarify the difference between the EQ in the inspector and the EQ in Fairlight in the mixer - The EQ in the inspector is a more basic EQ and only applied to individual clips. The EQ in the mixer in fairlight is has more points to adjust and is applied to the entire track. For me, when I make multicam clips, I have 1 consistent audio source inside the multicam clip, so I just use the Fairlight EQ to apply EQ to the entire track in my normal timeline. In general I use the Fairlight EQ for the entire track. I'd only use the inspector EQ on a certain clip if that clip needed some additional EQ that I could not accomplish with the Fairlight EQ. Here's a whole video on EQ if you are interested: kzbin.info/www/bejne/a4PWYouIhrifd68
@AndorSolymos Жыл бұрын
Hey Jason! I have a problem with clip selecting. This function "select clips forward on this track" is not working. The "all clips" option is working properly. I have no what the problem can be.
@JasonYadlovski Жыл бұрын
Maybe the shortcut got messed up? I'd check under keyboard customizations and see if it's still there. If you are using menu for that feature, I don't know. Make sure Resolve is up to date.
@jberenguer863 жыл бұрын
Just a question, I've been told that voice should be mostly around -10dB and -20 dB. But sometimes there're peaks that go above -5dB. Should I limit them with the threshold if there are too many to solve them manually (with the inspector and softening that peak isolated)? Thanks, Jason.
@JasonYadlovski3 жыл бұрын
Hi Jordi, thanks for checking out the video! Generally I set my levels to between -8db and -15bd. You don’t need a limiter, but the compressor can help. Here’s a video I did on how to set your audio levels, maybe it will help you. kzbin.info/www/bejne/i3TQpph7f6ygaqM
@abrotherinchrist3 жыл бұрын
Are you able to record 1-2 tracks of audio with very low latency with EQ and compression while monitoring the effects real-time? I'm downloading 17 now to see because I couldn't figure out how to accomplish low latency monitoring in 16. I'm not doing anything complicated. A lot of people are hollering that this is because of a lack of ASIO support. I typically use ASIO in Reaper to record music and I can record up to 30 tracks with a whole slew of VSTs running. I was hoping software as advanced as this could do somewhat close to the same without forcing me to buy a $995 audio "accelerator." I already spent $800 on an audio interface (Focusrite Clarett 8pre USB).
@JasonYadlovski3 жыл бұрын
Hey man, I'm not really sure if it can do what you're saying. Might take a little poking around the free version to see if it will work. Sorry I don't have an answer for you on this one. Thanks for watching!
@dannoringer3 жыл бұрын
Jason: Excellent video. You are a very good teacher. Very thoughtful presentation and very helpful content. I just upgraded to Vers 17, and I love it, and will be tuning in for your videos on how to leverage the power of vers. 17. Thank you !!!! Also, I just released my 18th video on the "dan noRinger" you tube channel if you ever wish to come over the check it out. Thanks, regards, Dan
@mikaelflink11452 жыл бұрын
Hey... if i dont have a mixer button ? then what do i do ? haha :)
@JasonYadlovski2 жыл бұрын
Hi! If you are in Fairlight, go under Workspace, then down to 'Show Panel in Workspace' and choose mixer. It should pop up in the toolbar along the top. Then click 'Mixer' and it should open it up.
@Donnamg1002 жыл бұрын
Thanks! In another vid you said the level should be between -20 to -15, so why set the limiter to -29?
@JasonYadlovski2 жыл бұрын
I don’t think I set the limiter to -29, where did I say that in the video? I would have to go double check. When working with dynamics you want to set your threshold lower in order to allow for audio ducking if you’re using that feature or keep the threshold lower so that you get the amount of compression that you want.
@Donnamg1002 жыл бұрын
@@JasonYadlovski at 5:29, but maybe you were just doing that for demo purposes?
@sangitadey61573 жыл бұрын
Hi.. I’m wondering if you could give me suggestions why in mixture I not get dynamic or other options? Even not get no input when tried for recording...
@JasonYadlovski3 жыл бұрын
Hi! My guess is that you are not in the fairlight tab. Jump into the musical notes tab along the bottom of the screen to get to Fairlight. Open the mixer in Fairlight and you should see it all.
@sangitadey61573 жыл бұрын
@@JasonYadlovski in fairlight just clicked the option meters and got the expanded form of mixer... there is inputs effects insert eq pan ...but still not finding dynamic 🙁
@JasonYadlovski3 жыл бұрын
Try clicking the 3 dots at the top right of the mixer. That will give you options to turn things on. I’m assuming your in DR17.
@sangitadey61573 жыл бұрын
@@JasonYadlovski Thank you so much🙏 yes got it now by clicking three dots 🙂... I’m using dv16 and I’m new in editing world... again thanks and really appreciate your help.
@JasonYadlovski3 жыл бұрын
👍😁 you got to come happy to help. If you’re just getting started check out my DaVinci Resolve 17 crash course, you should upgrade to 17 it’s really good. 😜 kzbin.info/www/bejne/fmO1ZmuvfK5snJY
@jamesmulligan1077 Жыл бұрын
Where's the Expander in 18.5? Can't find it anymore.
@JasonYadlovski Жыл бұрын
It’s still there in the exact same spot. Open the dynamics Panel in fairlight, and you should see it on the lower left.
@lasteffort1549 Жыл бұрын
Curious if anyone can answer this for me. If you're turning up the Ratio on the Compressor, is it effectively approaching the same function as just using the Limiter or is the end result qualitatively different? Thanks! :)
@JasonYadlovski Жыл бұрын
If you have the ratio cranked all the way up, it could be like a limiter but it’s really just reducing the peaks by whatever the ratio is set to. It’s not a hard limiter where it stops the audio at a certain threshold.
@lasteffort1549 Жыл бұрын
@@JasonYadlovski Thx man! For all the helpful vids. Your video on the Collage Effect got me started learning video editing when I had an idea for a type of video but no experience in video editing.
@JasonYadlovski Жыл бұрын
Awesome man! Glad I can help you get started. If you have any questions, drop a comment on any of my videos. 😁👍
@kogamavfx Жыл бұрын
💗💗
@JasonYadlovski Жыл бұрын
👍
@Studio279Productions3 жыл бұрын
Error to get the file(503 Service Unavailable)
@JasonYadlovski3 жыл бұрын
Thanks for the heads up, which link? The Buy Me a Coffee one or the one to actually get the file? I just tried both and they seem to work for me....🤔
@AlexisG733 жыл бұрын
Is the Dynamics panel only on the Studio version or also in the free version?
@JasonYadlovski3 жыл бұрын
It used to be in the free version too. I think it still is in the fairlight tab.
@AlexisG733 жыл бұрын
@@JasonYadlovski Will ask around. I only have EQ / Pan / Groups. So yeah It must not be included in the free version after all.
@JasonYadlovski3 жыл бұрын
Did you try scrolling the middle mouse wheel on that area? Or changing the size of the mixer? I’m 99% sure it should be there.
@AlexisG733 жыл бұрын
@@JasonYadlovski If I scroll over where it says (No Input) first down is EQ next is Pan and last is Group. So yeah they must have ditched it on the free version. Bummer.
@AlexisG733 жыл бұрын
@@JasonYadlovski ok I figured it out. you have to uncheck the EQ in order to get the Dynamics tab. I guess your can’t have both on at the same time.
@kylearking89183 жыл бұрын
I can't seem to find Dynamics on my mixer. It only shows audio.
@JasonYadlovski3 жыл бұрын
Hi! First make sure you’re in the fairlight page. Next, open the mixer and if you do not see dynamics there, try scroll in with your mouse wheel above the faders. If you still don’t see it, click on the three dots in the top right hand corner of the mixer and make sure you have dynamics checked on. You should see it then. Hope this helps!
@kylearking89183 жыл бұрын
@@JasonYadlovski Thank you! I found it!
@JasonYadlovski3 жыл бұрын
😁👍
@kylearking89183 жыл бұрын
@@JasonYadlovski I'm looking to remove a score track from a film clip. Do you recommend using Mixer/Dynamics/Equalizer for this?
@JasonYadlovski3 жыл бұрын
If you’re trying to remove music from a track that also has dialogue in it, there’s a good chance you’re not gonna be able to do that in DaVinci Resolve. At least not in a way that you’d wanna to use just a dialogue. You probably need something more advanced like isotope.
@darkechoproductionsllc95593 жыл бұрын
A limiter should be on the master track as most big Platforms will not take your film if you dont have a limter on the main track.
@JasonYadlovski3 жыл бұрын
Nice, thanks for sharing! 👍💯
@TricyKyleGuyorBloke2 жыл бұрын
I still can't open the Dynamics window despite having all the list at the mixer checked.
@JasonYadlovski2 жыл бұрын
It won’t let you double click it? Did you try restarting everything? It should work, I don’t see why it wouldn’t. 🤔
@TricyKyleGuyorBloke2 жыл бұрын
@@JasonYadlovski Its ok now thanks. All I had to do was to click the Meters tab right next to the Mixer
@MADB0X Жыл бұрын
Make up goes not on your face, but in your mouth! BOOM!
@JasonYadlovski Жыл бұрын
😂
@jtheggz39553 жыл бұрын
i double clicked it like a million times and still not showing... help!.. lol thank you
@JasonYadlovski3 жыл бұрын
Hi! What are you double clicking? Can you give me some more info?
@jtheggz39553 жыл бұрын
@@JasonYadlovski right on square where you show for dynamics panel
@JasonYadlovski3 жыл бұрын
Check around your screen, sometimes it will sit behind a Davinci Resolve window. If you still don’t see it maybe give it a restart and see if it’ll pop up then.
@jtheggz39553 жыл бұрын
@@JasonYadlovski thank you sir..very kind!
@JasonYadlovski3 жыл бұрын
You’re welcome!
@shomriddhosworld55873 жыл бұрын
why
@JasonYadlovski3 жыл бұрын
The question is not why, but why not🤔
@pahtashow3 жыл бұрын
no dynamics on three little dots wasted time
@JasonYadlovski3 жыл бұрын
Hi! Are you in the mixer in Fairlight? That’s where it is, should show up. Not sure why you don’t see it...🤔 did you try scrolling with the mouse above the fader too? Very strange.
@BojanBojovic3 жыл бұрын
Audio in Davinci is so bad compared to any DAW out there. They should ask Cockos to incorporate Reaper in Davinci, that would be simply brilliant.
@JasonYadlovski3 жыл бұрын
That would be great if they incorporated Reaper. I use that to record live music when I mix. We will have to wait and see what comes! Thanks for watching!
@xyzct Жыл бұрын
4:31 ... Respectfully, your description of the limiter in this particular panel is incorrect. Allow me to share incredibly helpful info here. The limiter in this panel is NOT a "hard" limiter, that is, it does not set a hard ceiling above which no signal can pass. This limiter is really just the compressor in drag ... with a high ratio. If you try to use this to set a hard limit, say to meet YT standards, you are going to be endlessly confused and frustrated. BUT, if you click on EFFECTS > DYNAMICS > LIMITER, there you will find a simple hard limiter. I do all of my NR, EQ, compression, etc., and then do this hard limit last (by just setting it to, say, -1db). It took me so $%&! long to figure that out ;-)
@JasonYadlovski Жыл бұрын
Thank for watching!
@xyzct Жыл бұрын
@@JasonYadlovski, no, thank _you._ I've learned a ton from your channel :-)