JD 6830P Front axle and handbrake

[@bradsinclair3640]

My neighbor has a 6320, sometimes the parking brake seems to slip slightly when parked on an incline. Could it be a damaged parking brake pawl? The machine might roll forward .5m before abruptly engageing the parking brake

[@mkmechanical]

sometimes pawl is not sitting in the correct position to lock the gear straight away, but 0.5m is a bit excessive... A broken pawl wouldn't lock the gear and a missing tooth on the gear would be audible. the only way to inspect is to remove Dropbox too. Drain hydraulic oil and remove dropbox bung to inspect the magnet.

[@bradsinclair3640]

@@mkmechanical Ok thanks! It must not move .5m, it feels like it slips though, and then the parking brake does engage hard. I will Try to check the inline filters/screens etc on the trans and range box

[@mkmechanical]

@@bradsinclair3640 Check mainly main suction screen on transmission pickup line and magnet on MFWD dropbox drain bung

[@bradsinclair3640]

@@mkmechanical Ok, I did that today, cleaned the screen and added a magnet to the other drain plug. And cleaned the parking brake lever on the outside of the range box, hopefully these all help! Thanks man!!

[@eduardoaguilar3073]

Good vídeo👍 Hello from Spain

[@mkmechanical]

Gracias señor

[@fabinoulog]

you need more sub good video

[@matteo692]

Good video . Mi iscrivo !!!