Jeep 2 5L distributor installation instructions

[@jesusmendez9973]

I replaced the piston rings on my 2.5L and now I’m not getting spark ⚡️. I’m assuming I need to re align it this way to get it going again.

[@SnowboardLife-h8g]

right on

[@timcallinan]

I'm rebuilding a jeep 2.5 engine now and I need to figure out the distributor timing. I get the concept of TDC on cylinder 1 but am confused on whether it is firing or exhaust? Could you explain this a little? thanks, Tim

[@saradavendonis4588]

Tim callinan put a compression gauge in cylinder number 1 and turn the engine over with a ratchet and socket or have someone carefully bump the starter and when u start building compression in your guage u know u are on compression stroke then stop bumping it and look at the harmonic balancer and rotate it to 0 on balancer and u will be at top dead center so u can put distributor in at that point

[@andrewarmstrong9194]

Or you could hold your finger in the spark plug hole and you will feel it blow air out that will tell you your on compression

[@JesusGuerrero-fe3du]

Thank you for taking your time to do this educational video

[@michaelcroft4527]

according to my motor you are 180 off

[@robertabbott6736]

your right this guy is confusing everybody. wasted my whole day till I figured it out wish I could flag his video