Jeep Cherokee XJ Coolant Flush

[@jplunkett3647]

For Consideration = After Flush = Use Air Compressor to PUSH out as Much Water as Possible = MIX Concentrate with Distilled Water in a 5 Gallon Bucket = Then ADD to engine Take remaining MIX in 5 Gallon Bucket = Pour back into Concentrate Container MOST important Mark with Permanent Marker on Container ( PRE Mix 50/50 ) Place into Vehicle Monitor Coolant Level ADD as required BEST to Remove Thermostat = Assists in FLUSH and Air Compressor PUSHING out as Much water as possible Install NEW Thermostat

[@trailspinTV]

Thank you! These are some really good steps! I’m going to pin it so that I can reference back to it! - Braxton

[@Zraupp10]

Water is used to keep the engine cool, antifreeze is so the water doesn't freeze. If you are in HOT climate use more water, if you are in a COLD climate use more antifreeze

[@ramilabidi3828]

Thanks for this video! I looked up coolant flushing a couple of months ago and couldn't figure out what exactly was being flushed. Your discussion in the video filled in the gaps.

[@trailspinTV]

Oh great! Thanks for watching! -Braxton

[@a.m.pierce2811]

Quote of the video, "Because, safety." Sounds like an idea for a shirt....love your videos!

[@trailspinTV]

🤔🤔🤔🤔 thank you!

[@bunnyofdoom87]

Definitely recommend using the coolant funnel kit to fully burp any air out of the system.

[@trailspinTV]

It’s just more and more stuff to buy when I don’t really have anywhere to put all this stuff. 😩 -Braxton

[@Mariachi1515]

@@trailspinTVjust pump it like a man by hand lol

[@patrickhenigin4805]

Old school worm gear clamps are for old school copper radiators. Radiators with plastic fittings need the constant tension clamps. The plastic fittings expand with heat and can crack or leak if the clamps can't expand and contract with them. They are easy to work with with the cable tool. For best results, replace them when you remove them.

[@BFGash]

Keep it going Braxton, good to see you man. Missed seeing my notifications for the channel!

[@trailspinTV]

Thank you!

[@jasonwolfe4252]

Just found this video. Freaking love it. Hope you got to go on a trip somewhere

[@FatKidontwowheels]

Glad to see you back... just watched your other new videos!

[@trailspinTV]

Glad to be back!

[@sierramantrvlnus]

Great job man. Now you can use those channel locks to take off that hose clamp the next time. But definitely get those screwy kind of hose clamps.

[@trailspinTV]

Most definitely!

[@chrisford416]

Hey man we're does your temp gauge stay at? I have a 1992 xj with the 4.0 ho high out put it stays at 210

[@jethroniusbronlo1007]

Bummer about the trip man. Tires look badass though👍🏻

[@trailspinTV]

Thank you!

[@alextataryn5173]

Thanks for the help! Where did you buy those beautiful tires?!

[@trailspinTV]

I first went to the website for the tire. Dickcepek.com and when you click buy it will show every website that sells them. It also shows the prices. And then I just chose the cheapest one.

[@abbas1872]

The logic is exactly right.

[@mtndewman1022]

do you have any mods to the exhaust? I sounds killer in the opening but not too far off from my stock sound!

[@trailspinTV]

I think this was before I fixed the hole in the exhaust. The hole was before the cat.

[@lloydhwhite3]

What are the odds your rocking an siue shirt

[@hayzersolar]

always do what is printed on the label. they made it they know how to use it.

[@jorgelopez5276]

Nice video bro we learning together lol